Sony DAV-HDX277WC Operating Instructions Manual page 86

Place the S-AIR sub unit that you want
to pair near the unit.
Identifying the unit with a
SP8cific$-IIR ... b,Ullit.
(pairing operation) .
For the surround amplifier
For the S-AIR receiver
It is easy to set the same 10 for the unit and an
S-AIR sub unit, such as a surround amplifier or
S-AIR receiver, to establish sound transmission.
However, neighbors may also receive your
system's sound if IDs are the same, or you may
receive the sound from neighbors. To prevent
this, you can identify the unit with a specific
S-AIR sub unit by performing the pairing
operation.
Your room
This unit
r+
IDA
I
p
==::)
~
IDA
I
S-AIR sub unit
Pairing
1
Neighbor
No transmission
IDA
S-AIR sub unit
86
US
When you perform pairing
Before pairing, sound transmission is
established by the 10 (example).
Your room Neighbor
This unit
IDA
I <;
/.,;
.Y.
y
-----
P // P
---
)
//
)
.............
IDA
I I
IDA
I
S-AIR sub unit
S-AIR sub unit
After pairing, sound transmission is established
between the paired unit and S-AIR sub unit(s)
only.
-
• Remove headphones from the surround
amplifier (if connected).
2
Match the IDs of the unit and the S-AIR
sub unit.
• To set the 10 of the unit, see "To set the 10
of the unit" (page 83).
• To set the 10 of the surround amplifier,
see "To set the 10 of the surround
amplifier" (page 84).
• To set the 10 of the S-AIR receiver, refer
to the operating instructions of the S-AIR
receiver.
3
Press FUNCTION +/- repeatedly until
"DVD" appears in the front panel
display.
4
Press
(3
DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
5
Press "'/oJ, to select _ [SETUP],
then press
CD.
The options for [SETUP] appear.
6
Press
",/OJ,
to select [CUSTOM], then
press
CD.
The Setup Display appears.
7
Press "'/oJ, to select [AUDIO SETUP],
then press
CD.
The options for [AUDIO SETUP] appear.