Electrical Requirements - Sharp ES-D159T-SL Instruction Manual

1 In case that it goes over
a door sill.
Don't let the height of the
drain hose exceed 20cm
from the bottom of
washer.

ELECTRICAL REQUIREMENTS

Electrical shock hazard : Failure to follow these instructions could result in
WARNING
• Electrical earth is required on this washer.
• If it does not fit the outlet, have a proper outlet
installed by a qualified electrician.
For your personal safety, this washer must be earthed.
C
This washer is equipped with a power supply cord (A) having a earthing plug (B).
To minimize possible shock hazard, the cord must be plugged into a mating
earthing-type wall receptacle (C).
If a mating wall receptacle is not available, it is the personal responsibility and
B
obligation of the customer to have the proper earthed wall receptacle installed by a
A
qualified electrician.
Non-Pump Model
2 In case of extending the
drain hose.
Don't let the total length
exceed 3m.
20Cm
death or serious injury.
Recommended earthing method
5
3 Be careful that the end of
the drain hose is not
immersed in water.
3m
• Don't earth to a gas pipe.
• Don't change the power supply cord plug.
• Check with a qualified electrician if you are not
sure the washing machine is properly earthed.