INSTALLATION INSTRUCTIONS
Location of washer
Check location where washer will be installed. Make sure you have everything
necessary for correct installation.
Proper installation is your responsibility.
• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.
• Install the washer on the horizontal solid floor.
• To reduce the risk of fire, this appliance must be fastened or otherwise secured to an
uncovered concrete floor.
C
A
UP
DOWN
Drain system
Never forget to install drain hose before operating your washer.
The packing box is opened, there are a drain hose the washer.
• Connect the drain hose to the drain outlet at the back of the washer.
NOTES
• The opening must not be obstructed by carpeting when the washing machine is installed
on a carpeted floor.
If the washer is installed on an unsuitable floor, it could make
considerable noise, vibration and cause a malfunction.
If washer is not level, adjust the front leg(A) up or down for
horizontal setting.
• Earthed electrical outlet(B) is required with 20cm of bottom
back of washer cabinet.
B
• Water faucets (C) must be within 1M of the upper back of
the washer cabinet and provide water pressure 0.3kgf/cm
8kgf/cm
(0.03MPa ~ 0.8MPa).
2
Non-Pump Model
4
Drain hose
-
2