About this manual • Before installing and using this unit, please read this manual carefully. Be sure to keep it handy for later reference. • This manual gives basic connections and operating instructions for 4 models (VM-6609P, 6612P, 6615P and 6620P).
Page 2
Servicing should always be referred touched. Any internal checks, settings, or repairs should be to your dealer or Sanyo Authorized Service Centre. performed by the dealer. Do not place object inside the monitor •...
Turn to adjust picture brightness according to your requirement. Power Indicator Lights when the power is on. Lit: When the power is on. Unlit: When power is off. Power Switch (POWER) Press this switch to turn the power on or off. Rear Panel VM-6609P VM-6615P VM-6620P VM-6612P...
PARTS NAMES AC input socket (AC INPUT) Sub-brightness control (SUB-BRI) Connect the AC power cord (supplied) securely to this socket Turn to adjust picture brightness. and to a wall outlet. Vertical Size control (V-SIZE) Video input terminals (VIDEO IN) Turn to adjust picture vertical size of the picture. These terminals are used to input a video signal source to Vertical hold control (V-HOLD) this monitor.
TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a SANYO-authorized dealer or service center for assistance. Problems Points to be checked Measures (Remedy) No power supply.