Yamaha YSP-3000 Service Manual page 43

10.IF STATUS (Input function status)
Using the sub-menu, the status data is displayed one
after another in the hexadecimal notation.
During signal processing, the status before execution
of this menu is maintained.
* The details of the following status information can
not be disclosed because of the development
purpose.
* The figures in the diagram are given as reference
only.
IS1-3 (Internal status):
Indicates the status information of the microprocessor.
CS1-6:
Indicates channel status information of the input signal
(IEC60958).
BS1-7:
Indicates information of the bit stream included in the dts
and AAC signal.
DS1-2:
Register information of the DIR.
T11-3:
Operation information of the DSP1 (IC5 DSP P.C.B.).
T21-3:
Operation information of the DSP2 (IC13 DSP P.C.B.).
Y11-2, 21-2, 31-2:
Not applied to these models.
MTT:
Operation information of mute trigger.
IS1:0100370000
5th byte
4th byte
3th byte
2th byte
1st byte
CS1:0000000000
BS1:0000000000
DS1:0001000000
T11:0808001600
T21:0003000000
Y11:FFFFFFFF00
MTT:0000000000
YSP-3000/YSP-30D/HTY-7030
IS3:00000007
CS6:reserved
BS7:00000000
DS2:FF0000
T13:4BFA7C2D
T23:reserved
Y32:0700000080
43