Yamaha YSP-3000 Service Manual page 36

YSP-3000/YSP-30D/HTY-7030
• Details of Self-Diagnostic Function menu
1. DSP THROUGH
The signal is not changed into beam and output from
the channel specified by the sub-menu.
When 2CH signals are input, they are distributed as
follows at DSP1 (IC5 DSP P.C.B.).
L CH ..... RONT L, S
R CH .... RONT R, S
Delay of each channel processed at DSP1 (IC5 DSP
P.C.B.) is invalid.
DSP THR ALL
• All outputs (FRONT L/R, CENTER, SURROUND L/R,
LFE) are provided.
DSP THR FRONT L
• FRONT L output.
• LFE is output through FRONT L only but not in digital
full bit.
DSP THR CENTER
• CENTER output.
• LFE is output through CENTER only but not in digital
full bit.
DSP THR FRONT R
• FRONT R output.
• LFE is output through FRONT R only but not in digital
full bit.
DSP THR SURROUND R
• SURROUND R output.
• LFE is output through SURROUND R only but not in
digital full bit.
DSP THR SURROUND L
• SURROUND L output.
• LFE is output through SURROUND L only but not in
digital full bit.
DSP THR LFE (SUBWOOFER OUT)
• LFE output.
36
L, CENTER, LFE
R
1.DSP THR ALL
1.DSP THR FL
1.DSP THR C
1.DSP THR FR
1.DSP THR SR
1.DSP THR SL
1.DSP THR LFE