CTEK MXS 7.0 Product Manual
  1. Manuals
  2. Brands
  3. CTEK Manuals
  4. Battery Charger
  5. MXS 7.0
  6. Product manual

CTEK MXS 7.0 Product Manual

Hide thumbs Also See for MXS 7.0:
1
2
3
4
5
6

Advertisement

Table of Contents

See also: Troubleshooting Manual
MANUAL
CONGRATULATIONS
to the purchase of your new professional switch mode battery charger.
This charger is included in a series of professional chargers from CTEK SWEDEN AB and
represents the latest technology in battery charging.
CTEK COMFORT CONNECT
CHARGE CABLE
MODE
NORMAL
CTEK COMFORT CONNECT – eyelet M8
*Supply plugs may differ to suit your wall socket.
20015462E MXS 7.0, Manual EU, Print file 002.indd 3
SUPPLY PLUG*
MAINS CABLE
MXS 7.0
SUPPLY
RECOND
AGM
12V/7A
SUPPLY
RECOND
CTEK COMFORT CONNECT – clamp
CHARGING
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The power lamp will indicate that the mains
cable is connected to the wall socket. The error lamp will indicate if the battery clamps
are incorrectly connected. The reverse polarity protection will ensure that the battery
or charger will not be damaged.
3. Press the MODE-button to select charging program.
4. Follow the indication lamps through the charging process.
The battery is ready to start the engine when
The battery is fully charged when
5. Stop charging at any time by disconnecting the mains cable from the wall socket.
ABSORPTION, READY TO USE
ANALYSE
DESULPHATION
SOFT START BULK
ERROR LAMP
MODE-
BUTTON
POWER
LAMP
NORMAL
BATTERY
AGM
SUPPLY
PROGRAM
BATTERY
PROGRAM
PROGRAM
is lit.
is lit.
FLOAT, FULLY CHARGED
PULSE, MAINTENANCE CHARGING
RECOND
PROGRAM
EN • 3
2011-10-11 07:58:00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MXS 7.0 and is the answer not in the manual?

Questions and answers

Related Manuals for CTEK MXS 7.0

Summary of Contents for CTEK MXS 7.0

  • Page 1 1. Connect the charger to the battery. This charger is included in a series of professional chargers from CTEK SWEDEN AB and 2. Connect the charger to the wall socket. The power lamp will indicate that the mains represents the latest technology in battery charging.

  • Page 2: Error Lamp

    20Ah Supply program activates Float step 50Ah without time or voltage limitation. 100Ah 150Ah WARNING! The spark protection on the battery charger is disabled during SUPPLY program. 4 • EN 20015462E MXS 7.0, Manual EU, Print file 002.indd 4 2011-10-11 07:58:02...

  • Page 3: Charging Program

    Charging with declining current to maximize up to 100% battery capacity. Maintaining the battery at 95–100% capacity. The charger monitors the battery voltage and gives a pulse when necessary to keep the battery fully charged. EN • 5 20015462E MXS 7.0, Manual EU, Print file 002.indd 5 2011-10-11 07:58:03...

  • Page 4: Connect And Disconnect Charger To Battery

    High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.

  • Page 5: Limited Warranty

    SAFETY LIMITED WARRANTY CTEK SWEDEN AB, issues this limited warranty to the original purchaser of this product. • The charger is designed for charging 12V lead-acid batteries. Do not use the charger This limited warranty is not transferable. The warranty applies to manufacturing faults for any other purpose.
  • Page 6 RCD 000835541-0001 CTM1042686 EP09170640.8 pending RCD 000835541-0002 CTM 766840 pending US12/564360 pending D596126 SE528232 D596125 SE525604 RCD 001705138 pending US D29/378528 pending RCD 201030618223.7 pending US RE42303 US RE42230 8 • EN 20015462E MXS 7.0, Manual EU, Print file 002.indd 8 2011-10-11 07:58:05...

This manual is also suitable for:

Mxt 4.0

Table of Contents