Tea Water - La Marzocco GB/5 Software Programming Manual

Technician Level Parameters

Tea water

without pump
e -
Description
• This parameter allows the technician to select the
activation of the water pump during hot water
dispensing.
• When hot water is drawn from only the steam boiler
this parameter should be set to "without pump"
• If the optional adjustable temperature hot water
dispense valve is installed, this parameter is set to
"with pump".
Display
1
LaMarzocco 09:30
2
Password
?????
3
Language
English
4
Tea water
without pump
5
34
Tea Water
Press and hold the button on the group 1 keypad until the following is displayed
(approximately 10 seconds):
Enter the 5 digit technician password using buttons 1-5 on the group 1 keypad. Once accepted the
following appears:
MODE
Press the button on the group 1 keypad until the following appears (about eight times):
+
Press the or the button to change to "with pump" or "without pump". Once the desired
condition is displayed press the
When finished, continue to the next parameter or press
Operating Procedure
button to confirm.
MODE
ON
OFF
La Marzocco, S.r.l.
Version 1.3
to exit programming mode.
Firenze, Italia