LEGRAND LEGD365 061 Installation Instructions Manual

Installation instructions for entry kits using entry panels
LEGD365 061/062/064/066/068/069/060
Description
Components required for 1 to multi apartment kits
Series 7 Handset

System operation

When a call button on the outside entry panel is pressed all the handsets connected to this call button will ring. A
maximum of four handsets can be connected to one call button. There will be a simultaneous ring at the entry panel to
confirm the ringing at the handset(s). When lifting the handset off its cradle inside, communication between the
handset and entry panel can take place. If at the same time any other handset is lifted off its cradle, there will be
common communication with the first handset and the entry panel. At any time any handset in the system can be lifted
off its cradle and there will be a communication link with the entry panel. This is regardless of whether this handset has
been called from the entry panel. The speech volume at the handset(s) and entry panel can be set independently.
The entrance door or gate can be operated using the door/gate release pushbutton provided on the handset. A second
pushbutton is provided to operate auxiliary functions such as other features on the entrance gate operator or switch a
light outside the front door or gate. A pushbutton is provided on the entry panel to illuminate the call button label and
improve usability in dark conditions. This latest generation of entry panels, the Series 7, simplifies the installation of the
system, and through improved weatherproofing enhances the long term reliability of the product.
Entry Panel
(Made up in 2 button increments
to suit number of call buttons required)
Ground
85
Ground
Surface Box
mild steel or
3CR12 stainless steel
with light grey epoxy coating
(Select size according to
configuration of entry panel)
Power supply unit
CP13E/12V
alternatively connect to
12V DC battery of gate motor