One-Touch Lane Changer - Subaru 2015 XV Crosstrek Hybrid Owner's Manual

One-touch lane changer

To flash the turn signal and turn signal
indicator light three times, push the turn
signal lever up or down slightly and
immediately release it.
The operational/non-operational setting of
the one-touch lane changer s can be
changed by a SUBARU dealer. Contact
the nearest SUBARU dealer for details.
Instruments and controls/Illumination brightness control
Illumination brightness con-
trol
The illumination brightness of the instru-
ment panel dims under the following
conditions.
. when the light switch is in the
position
. when the light control switch is in the
AUTO position and the headlights illumi-
nate automatically (models with auto on/
off headlights: Refer to Headlights
79.)
You can also adjust the illumination bright-
ness for better visibility in the following
ways.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
NOTE
. When the control dial is turned fully
upward, the illumination brightness
becomes the maximum and the auto-
matic dimming function does not work
at all.
. The brightness setting is not can-
celed even when the ignition switch is
turned to the LOCK (off) position.
or
3-
3-83