Page 1
Installation Guide - Fibre Wireless Modem - Technicolor TG582n Getting Your Internet Running Check your modem package contents. It should contain the items shown here: Front Panel LED Explanation Connect Your Modem...
Page 2
2. Connect the power supply to the Technicolor modem and plug it in. 3. Connect the phone cord to the Technicolor modem and plug into the phone wall jack. (There should be no surge suppressors or DSL filters on this line.) 4.
Page 3
3. Then, You can see then main page of Technicolor TG852n. Click Technicolor Gateway on left side menu. 4. Click Setup my Technicolor Gateway...
Page 4
Setup your internet setting for Technicolor Modem - TG582n Step 1: Click Setup my Technicolor Gateway Step 2...
Page 5
Step 3: Select 0.35 on VPI/VCI drop down list...
Page 6
Step 4: Input your Internet World-Link User Name & Password ( for login internet use ) Step 5: Modem Password ( for modem use ) usually user: admin & password: 1234...
Page 8
Step 8 Congratulations! Your connection is up and running and you should be able to browse the internet.
Page 9
To "modify" Internet Setup - TG582n Step 1: Click Internet > View more... Step 2: type your internet login Username & Password...
Page 10
Setup Wireless Network Home Network Menu Click Home Network on Left Menu. Then, Click Wireless Name (WLAN) on the right hand side. (eg.WLAN:TNCAP93E9A5) You are in "Wirelss Access Point Page" (Wireless Page). Then, Click Configure.
Page 11
Step 1 Step 2: Wireless Key - Select WPA-PSK + WPA2-PSK (Wireless Key default on the modem label)
Page 12
Step 3: Show up Encryption Key(Wireless password key). Click Apply button. After all, your wireless device can connect your modem with wireless key to the internet.
Need help?
Do you have a question about the TG582n and is the answer not in the manual?
Questions and answers