Page 1
ESP 3250 All-in-One Printer ESP 3260 All-in-One Printer 3200 Series Note: A USB 2.0 cable is required to connect your KODAK All-in-One Printer to your WINDOWS or MACINTOSH OS Computer. Available in the KODAK Store or see your local retailer.
Unpacking the Printer Included with your KODAK All-in-One Printer: Power Cord and Adapter Printer Access Door Scanner Lid Printhead Black & Color Ink Cartridges To view a setup video for your printer, go to IMPORTANT: www.kodak.com/go/inkjetvideo. a. Remove all shipping tape from the outside of the printer.
Connecting the Power www.kodak.com/go/aiosupport a. Connect the: • power cord to the adapter • adapter to the printer • power cord to the power source Do not connect the USB cable to the printer until instructed during software install. b. Remove the plastic film from the LCD.
Do not touch the copper-colored contacts. c. Remove the two plastic protective shields. d. Place the printhead into the carriage. Insert at the angle shown. e. Push firmly against the target label of the printhead until you hear a loud snap. www.kodak.com/go/aiosupport...
Page 5
Insert the black ink cartridge into the printhead. d. Press down on the ink cartridge until you hear it click into position. e. Repeat steps 4a - 4d with the color ink cartridge . f. Close the printer access door and press OK. www.kodak.com/go/aiosupport...
Page 6
Carefully fan and stack the paper, then insert it into the tray. f. Move the paper forward until it stops. g. Move the left paper-edge guide until it stops. h. Press Start. Calibration will take two to three minutes. www.kodak.com/go/aiosupport...
Page 7
Installing Software on WINDOWS OS KODAK Home Center Software for WINDOWS OS a. Load the KODAK All-in-One Printer Software CD into the CD drive. Follow the on-screen instructions. If the installer window does not open, click Start, then click Computer or My Computer, and double-click the CD drive.
Page 8
Connect the USB cable to the USB port on the printer and to your MACINTOSH Computer. b. Load the KODAK All-in-One Printer Software CD into the CD drive. Follow the on-screen instructions. If the installer window does not open, double-click the KODAK All-in-One Printer Software CD icon on the desktop.
Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak together with proof of the purchase price paid.
• Do not place your all-in-one printer on an unstable cart, stand, bracket, or table. Injury to persons and damage to the equipment may occur. • The use of an accessory attachment that is not recommended by Kodak, such as an AC adapter, may cause fire, electric shock, or injury.
Page 11
Registration has its rewards—including a terrific offer. Register your KODAK All-in-One Printer and get great support, expert tips, free software downloads— plus a phenomenal deal on inkjet supplies to get you started . Simply register right away when prompted during software installation or on the Web at www.kodak.com/go/register.
Page 12
3. Make sure that you have the most up-to-date software and firmware. Go to www.kodak.com/go/downloads For additional assistance: Go to www.kodak.com/go/aiosupport, select your printer, and view Frequently Asked Questions (FAQs), Step-by-Step Solutions and Repairs, User Guides, and more. Eastman Kodak Company Rochester, NY 14650 U.S.A.
Need help?
Do you have a question about the ESP 3200 and is the answer not in the manual?
Questions and answers