Fujitsu ETERNUS DX200F Configuration Manual page 44

Chapter 5 General Settings
5.4 Storage Management (Initial Setup 1)
(1)
Click the [IPv4 Settings] tab to specify an IPv4 address. Click the [IPv6 Settings] tab to specify an
IPv6 address.
The following procedure shows an example when selecting the [IPv4 Settings] tab.
A confirmation screen appears.
(2)
Click the [OK] button.
The network environment setting is applied and the setting completion screen appears.
(3)
Click the [Done] button.
The [Logout] screen appears.
7
Logout
(1)
Click the [Close] button.
Initial setup 1 is complete and the screen returns to the [Login] screen.
(2)
Close the Web browser.
FUJITSU Storage ETERNUS DX200F All Flash Array Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
44
P3AM-8462-01ENZ0