05 USB PLAYER
Using the USB BOX
This unit consists of a USB port and an auxiliary
Jack socket*. The audio files are transmitted
from a portable device - digital player or a USB
memory stick - to your Audio system and heard
via the vehicle's speakers.
USB memory stick or Apple
®
generation 5 or later:
-
Give preference to multimedia USB memory
sticks (in general formatted FAT 32 File
allocation Table),
®
-
the apple
player lead is essential,
-
navigation through the file database is also
possible by means of the steering mounted
controls.
players of earlier generations and
®
other apple
players using the MTP protocol*:
-
play via Jack-Jack lead only (not supplied),
-
navigation through the file database is from
the portable device.
player of
connecting a USB memory stick
Connect the memory stick to the port, directly or
using a lead. If the audio equipment is switched
on, the USb source is detected as soon as it
is connected. Play begins automatically after a
delay which depends on the capacity of the USb
memory stick.
The file formats supported are .mp3 (mpeg1
layer 3 only) and .wma (standard 9 only,
128 kbits/sec compression).
Certain playlist formats are supported (.m3u, ...)
On reconnection of the previous memory stick
used, play is resumed automatically with the last
track played.
The system puts together playlists (temporary memory) created
over a period which depends on the capacity of the USB device.
The other sources are available during this time.
The playlists are updated each time the ignition is switched off or
each time a USB memory stick is connected.
When connecting for the first time, the classification suggested
is by folder. When you reconnect, the classification selected
previously is retained.
* Depending on vehicle.
Need help?
Do you have a question about the DS3 and is the answer not in the manual?
Questions and answers