CITROEN DS3 Owner's Handbook Manual
Hide thumbs Also See for DS3:
Table of Contents

Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS3 and is the answer not in the manual?

Questions and answers

Dave
March 8, 2025

Warning lights

1 comments:
Mr. Anderson
March 8, 2025

The warning lights on a Citroen DS3 indicate various issues or system statuses:

- Battery Warning Light: If illuminated, the battery is not being charged. Contact a Citroen or independent workshop.
- Traction Control Warning Light: Flashes when the ESP or ASR systems are active. If illuminated along with a message, the SERVICE warning light, and a sound signal, it indicates a system fault.
- STOP Warning Light: Requires immediate action. Stop the vehicle, switch off the engine, and contact a Citroen dealer or diagnose the fault using an iCarsoft i970 Citroen OBD Code Reader.
- Pre-heating Warning Light: Illuminates in cold temperatures for diesel cars.
- Fuel Warning Light: Indicates low fuel level; refuel as soon as possible.
- Coolant Warning Light: Indicates an issue with the coolant system.
- Engine Warning Light: Stays on if there is an engine malfunction. Use an iCarsoft i970 Citroen OBD Code Reader to diagnose and reset the light.
- Airbag Warning Light: Indicates a problem with the airbag system that needs immediate attention.

These lights provide essential information about the vehicle’s condition and necessary actions.

This answer is automatically generated

Liz
March 12, 2025

How do I set date and time

1 comments:
Mr. Anderson
March 12, 2025

To set the date and time on a 2016-2017 Citroën DS3 with a touchscreen display:

1. Press the Menu button on the radio screen.
2. Select Time and Date from the multi-function settings options.
3. Tap the Time option.
4. Enter the correct time and confirm the setting.
5. Choose between 12-hour or 24-hour format if needed.
6. If using satellite synchronization, it will set the time zone automatically.
7. Tap the Date option.
8. Enter the correct date and confirm.
9. A green tick will appear at the bottom—wait for the settings to apply.
10. Press the Menu button again to exit and return to the radio screen.

This completes the adjustment process.

This answer is automatically generated

Summary of Contents for CITROEN DS3

  • Page 2 If the heading "MyCitroën" is not available on the public website for Select: your country, you can fi nd your handbook at the following address: the link in "Private customer access", http://service.citroen.com the language, the model, the edition date appropriate for the date of registration of your vehicle.
  • Page 3 We draw your attention to the following... Your vehicle is fitted with only some of the equipment described in this document, depending on the trim level, version and the CITROËN has a presence on every continent, specifications for the country in which it is sold. a complete product range, bringing together technology and a permanent spirit of innovation, for a modern and creative approach to mobility.
  • Page 4 Contents Contents FAMILIARISATION MONITORING safety warning ECO-DRIVING Instrument panels Indicator and warning lamps additional information Indicators contributes to the protection of the environment VISUAL SEARCH Adjustment buttons Trip computer refer to the page indicated ALPHABETICAL INDEX...
  • Page 5: Table Of Contents

    MULTIFUNCTION COMFORT ACCESS VISIBILITY SCREENS Monochrome screen A Ventilation Remote control key 112 Lighting controls Monochrome screen C Heating Alarm 117 LED lamps 16/9 colour screen (MyWay) Manual air conditioning 100 Window controls 117 Headlamp adjustment Digital air conditioning 102 Doors 118 Wiper controls Rear screen demist - defrost 105 Boot...
  • Page 6 FITTINGS CHILD SAFETY SAFETY DRIVING 126 Interior fi ttings 134 Child seats 146 Direction indicators 162 Parking brake 130 Boot fi ttings 140 ISOFIX child seats 146 Hazard warning lamps 163 6-speed manual gearbox 147 Horn 164 Gear effi ciency indicator 147 Emergency or assistance call 165 Electronic gearbox 148 Braking assistance systems...
  • Page 7 CHECKS PRACTICAL TECHNICAL DATA AUDIO AND INFORMATION TELEMATICS 187 Bonnet 198 Temporary puncture repair 238 Petrol engines 253 Emergency or assistance 188 Running out of fuel (Diesel) 240 Petrol weights 255 MyWay 204 Changing a wheel 189 Petrol engines 242 LPG engines 287 Audio system 211 Changing a bulb 190 Diesel engines...
  • Page 8 Familiarisation Familiarisation All aspects of the use of your vehicle are presented in this section to allow quick and effective familiarisation with the main systems.
  • Page 10: Puncture Repair Kit

    Exterior Customising kits Rear parking sensors These expressive stickers form part of a range This system provides a warning when reversing Stop & Start of kits, very different one from another, which by detecting obstacles located behind allow you to create a unique and attractive the vehicle.
  • Page 11: Remote Control Key

    Familiarisation Open Remote control key Fuel tank Bonnet A. Unfolding/Folding the key. Opening the fuel filler flap. B. Unlocking the vehicle. 2. Opening and hooking the fuel filler cap. Tank capacity: approximately 50 litres (petrol), approximately 46 litres (Diesel). Other functions... (according to version: approximately C.
  • Page 12: Scented Air Freshener

    Interior Scented air freshener The scented air freshener diffuses the selected fragrance throughout the passenger Gear effi ciency indicator compartment from its location in the ventilation Associated with the manual gearbox, this system. system suggests when to change up to obtain optimum fuel consumption.
  • Page 13: Instruments And Controls

    Familiarisation Instruments and controls Audio equipment steering wheel controls. 2. Steering lock and ignition. 3. Wiper/screenwash/trip computer stalk. 4. Instrument panel. 5. Scented air freshener. 6. Driver’s airbag. Horn. Gear lever. 8. Parking brake. Central armrest with storage. 10. Door mirror controls. Electric window controls.
  • Page 14 Instruments and controls Steering wheel adjustment. 2. Headlamp height adjustment. 3. Cruise control/speed limiter controls. 4. Lighting and direction indicator stalk 5. Central locking button. 6. Multifunction screen. Hazard warning lamp switch. 8. Central adjustable air vents. Sunshine sensor Hi-Fi audio system central speaker. 10.
  • Page 15: Front Seats

    Familiarisation Sitting comfortably Front seats Forwards-backwards adjustment. 2. Height adjustment. 3. Seat back angle adjustment. 79, 82...
  • Page 16: Sitting Comfortably

    Sitting comfortably Head restraint height Access to rear seats Steering wheel adjustment adjustment Release the adjustment mechanism. To raise, pull it upwards. Pull the control lever upwards to fold the 2. Adjust for height and reach. To lower, press the lug A and down on the backrest and move the seat forwards.
  • Page 17: Door Mirrors

    Familiarisation Sitting comfortably Door mirrors Rear view mirror Front seat belts Adjustment Manual day/night type A. Selecting the door mirror. Selecting the "day" position of the rear view mirror. A. Fitting the belt. B. Adjusting the position of the door mirror. 2.
  • Page 18: Seeing Clearly

    Seeing clearly Lighting Wipers Ring A Control stalk A: windscreen Switching on "AUTO" mode wipers Push the stalk downwards and release it. Lighting off. Fast wipe. Automatic illumination of headlamps. Normal wipe. Switching off "AUTO" mode Sidelamps. Int. Intermittent wipe. Push the stalk upwards and return it Park.
  • Page 19 Familiarisation Ventilation Advice on interior settings Heating or Manual air conditioning I require... Air recirculation/ Air distribution Air flow Temperature Manual A/C Exterior air intake HEAT COOL DEMISTING DEFROSTING Digital air conditioning: use of the fully automatic mode by pressing the "AUTO" button is recommended.
  • Page 20: Instrument Panels

    Monitoring Instrument panels Warning lamps Switch panel On switching on, the dial needles go to the With the ignition on, the orange and red Lighting of the indicator lamp indicates the state extent of their travel then return to 0. warning lamps come on.
  • Page 21: Passenger Safety

    Familiarisation Passenger safety Customise your vehicle Front passenger’s airbag Front seat belts and Using expressive stickers passenger’s front airbag Open the glove box. A. Front seat belts not fastened or unfastened These styling stickers are treated to give good 2. Insert the key. warning lamp.
  • Page 22: Driving Safely

    Driving safely Electronic gearbox Display in the instrument panel Starting and moving off The gear engaged or the driving mode selected Select position N. appears in the instrument panel screen. Press the brake pedal firmly. Neutral. Start the engine. Reverse. Select automated mode (position A) or 1 to 5/6.
  • Page 23: Automatic Gearbox

    Familiarisation Driving safely Automatic gearbox Display in the instrument panel Starting and moving off This four speed gearbox offers the choice of the comfort of automatic operation or the Park. Apply the parking brake. pleasure of manual gear changing. Reverse. Select position P or N .
  • Page 24 Driving safely Stop & Start Going into engine STOP mode Going into engine START mode The "ECO" warning lamp comes on The "ECO" warning lamp goes off in the instrument panel and the engine and the engine restarts automatically: goes into standby automatically: with a manual gearbox: when you fully with a manual gearbox : at speeds below depress the clutch pedal.
  • Page 25: Cruise Control

    Familiarisation Driving safely Speed limiter "LIMIT" Cruise control Display in the instrument panel "CRUISE" Selecting/Switching off speed limiter mode. Selecting/Switching off cruise control mode. The cruise control or speed limiter mode 2. Decrease the programmed value. 2. Decrease the programmed value. appears on the instrument panel when it is 3.
  • Page 26: Electrical Equipment

    Eco-driving Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO emissions. Optimise the use of your Drive smoothly Control the use of your gearbox electrical equipment With a manual gearbox, move off gently, Maintain a safe distance between vehicles, use change up without waiting and drive by engine braking rather than the brake pedal,...
  • Page 27 Limit the causes of excess Observe the recommendations consumption on maintenance Switch off the headlamps and front foglamps Spread loads throughout the vehicle; place the Check the tyre pressures regularly, when when the level of light does not require their heaviest items in the bottom of the boot, as cold, referring to the label in the door use.
  • Page 28 Instruments and controls To help you understand the information presented in the instrument panel, this section describes the three back-lit dials, the location and purpose of each warning and indicator lamp, and explains the information provided by your trip computer.
  • Page 30 Petrol - Diesel instrument panels, manual, electronic or automatic gearbox Provided with permanent back-lighting, the instrument panel groups together the vehicle's dials and indicator and warning lamps. Dials Rev counter. 4. Display screen. Lighting dimmer button. Indicates the speed of rotation of the 5.
  • Page 31 Monitoring Screen A. Speed limiter E. Service indicator (mph or km/h) or (miles or km), then Cruise control. Total mileage recorder B. Gear efficiency indicator. These two functions are displayed C. Electronic or automatic gearbox successively when switching on the ignition information.
  • Page 32 RACING petrol instrument panel, manual gearbox Provided with permanent back-lighting, the instrument panel groups together the vehicle's dials and indicator and warning lamps. Dials Rev counter. 4. Display screen. Lighting dimmer button. Indicates the speed of rotation of the 5. Fuel level. Adjusts the level of the instrument and controls engine (x 1 000 rpm).
  • Page 33 Monitoring Screen A. Speed limiter r C. Service indicator r (mph or km/h) or (miles or km), then Cruise control. Total mileage recorder . B. Range These two functions are displayed (miles or km) or successively when switching on Trip mileage recorder. the ignition.
  • Page 34: Indicator And Warning Lamps

    Indicator and warning lamps Associated warnings Visual indicators informing the driver that a system is in operation (operation The illumination of certain warning lamps may or deactivation indicator lamps) or of the be accompanied by an audible signal and a occurrence of a fault (warning lamp).
  • Page 35 Monitoring Operation indicator lamps If one of the following indicator lamps comes on, this confirms that the corresponding system has come into operation. Warning lamp is on Cause Action/Observations Left-hand flashing with buzzer. The lighting stalk is pushed down. direction indicator Right-hand flashing with buzzer.
  • Page 36 Warning lamp is on Cause Action/Observations Diesel engine fixed. The ignition switch is at the Wait until the warning lamp goes off before starting. pre-heating 2nd position (ignition on). The period of illumination of the warning lamp is determined by the climatic conditions (up to about thirty seconds in extreme climatic conditions).
  • Page 37 Monitoring Warning lamp is on Cause Action/Observations Passenger's fixed. The control switch, located in the Turn the control switch to the " OFF " position glove box, is in the "ON" position. airbag system to deactivate the front passenger's airbag. The passenger's front airbag is In this case you can install a rear-facing child seat.
  • Page 38 Deactivation indicator lamps If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally. This is may be accompanied by an audible signal and a message on the multifunction screen. Warning lamp is on Cause Action/Observations...
  • Page 39: Warning Lamps

    Monitoring Warning lamps Any fault resulting in the illumination of a warning lamp must be investigated further by When the engine is running or the vehicle is reading the associated message in the multifunction screen. being driven, the illumination of one of the If you encounter any problems, do not hesitate to contact a CITROËN dealer or a qualified following warning lamps indicates a fault which workshop.
  • Page 40 Warning lamp is on Cause Action/Observations fixed, associated with The braking system fluid level is too You must stop as soon as it is safe to do so. the STOP warning low. Top up with brake fluid recommended by CITROËN. lamp.
  • Page 41 Monitoring Warning lamp is on Cause Action/Observations Engine flashing. The engine management system has Risk of destruction of the catalytic converter. autodiagnosis a fault. Have it checked by a CITROËN dealer or a qualified system workshop. fixed. The emission control system has The warning lamp should go off when the engine is started.
  • Page 42 Warning lamp is on Cause Action/Observations Engine oil fixed. There is a fault with the engine You must stop as soon it is safe to do so. pressure lubrication system. Park, switch off the ignition and contact a CITROËN dealer or a qualified workshop. Battery charge fixed.
  • Page 43 Monitoring Warning lamp is on Cause Action/Observations Airbags temporarily. This lamp comes on for a few seconds This lamp should go off when the engine is started. when you turn on the ignition, then If it does not go off, contact a CITROËN dealer or a goes off.
  • Page 44: Coolant Temperature Indicator

    Coolant temperature indicator With the engine running, when the needle is: After driving for a few minutes, the temperature in zone A , the temperature is correct, and pressure in the cooling system increase. in zone B, the temperature is too high; To top up the level: the central STOP warning lamp and the wait for the engine to cool down,...
  • Page 45: Service Indicator

    Monitoring Service indicator Between 600 miles (1 000 km) Less than 600 miles (1 000 km) and 1 800 miles (3 000 km) remain remain before the next service is due before the next service is due Example: 560 miles/900 km remain before the For a few seconds after the ignition is switched next service is due.
  • Page 46 Service overdue For a few seconds after the ignition is switched on,the spanner flashes to indicate that the service must be carried out as soon as possible. Example: the service is overdue by 180 miles (300 km). For a few seconds after the ignition is switched on, the display indicates: Following this operation, if you wish to disconnect the battery, lock the vehicle...
  • Page 47: Engine Oil Level Indicator

    Monitoring Engine oil level indicator Oil level correct Oil level indicator fault This is indicated by the flashing of "OIL--" . Contact a CITROËN dealer or a qualified workshop. Dipstick Refer to the "Checks" section to locate the System which informs the driver whether the dipstick and the oil filler cap on your engine.
  • Page 48: Lighting Dimmer

    Trip distance recorder Lighting dimmer Total distance recorder System which measures the total distance System which measures a distance travelled System for manual adjustment of the brightness travelled by the vehicle during its life. during a day or other period since it was reset of the instruments and controls in relation to the The total and trip distances are displayed for to zero by the driver.
  • Page 49: Black Panel

    Monitoring Black panel Activation System allowing certain displays to be switched off for night driving. With the lighting on, press the left hand The instrument panel remains illuminated with button of the instrument panel several only the vehicle speed and cruise control or times to progressively reduce the speed limiter information, if in use.
  • Page 50: Trip Computer

    Trip computer System that gives you current information on your journey (range, fuel consumption…). Monochrome screen A The trip computer provides the following information: range, average speed. current fuel consumption, The next press then returns you to the normal display. Stop &...
  • Page 51: Monochrome Screen C

    Monitoring Monochrome screen C the current information tab with: ● the range, ● the current fuel consumption, 16/9 colour screen (MyWay) ● the distance remaining to be travelled or the Stop & Start time counter. the trip "1" tab with: ●...
  • Page 52: Current Fuel Consumption

    A few definitions… Range Current fuel consumption Distance travelled (miles or km) (mpg or l/100 km or km/l) (miles or km) This indicates the distance This is the average fuel consumption This indicates the distance which can still be travelled with the fuel during the last few seconds.
  • Page 53 Monitoring...
  • Page 54: Multifunction Screens

    Multifunction screens Identify your multifunction screen in this section, to adjust or view vehicle settings and information, by means of the user-friendly menus.
  • Page 56: Monochrome Screen A

    Monochrome screen A Displays on the screen Controls Main menu Press the "MENU" button to gain access to the main menu , then press the " " or " " buttons to scroll through the various menus: - radio-CD, - vehicle configuration, This displays the following information: From the control panel of your Audio system, - options,...
  • Page 57 Multifunction screens Radio-CD Vehicle confi guration Options With the Audio system switched on, once the Once the "Vehicle Configuration" menu has Once the "Options" menu has been selected, "Radio-CD" menu has been selected you can been selected, you can activate or deactivate you can start diagnostics of the status of the activate or deactivate the functions linked the following equipment:...
  • Page 58: Display Settings

    Display settings Languages Once you have selected a setting, press the " " or " " buttons to change its value. Once the "Display settings" menu has been Once the "Languages" menu has been selected, selected, you can gain access to the following you can change the language used by the display settings: (Français, Italiano, Nederlands, Portugues,...
  • Page 59 Multifunction screens Monochrome screen C Displays on the screen Controls Main menu Press the "MENU" button to gain access to the main menu: - audio functions, - the trip computer, - personalisation-configuration, - telephone (hands-free kit). Press the " " or " " buttons to select the This displays the following information: From your Audio system control panel, you can: menu required, then confirm by pressing...
  • Page 60 "Audio functions" "Trip computer" menu menu With the Audio system switched on, once this Once this menu has been selected, you can Press the "MENU" button to gain access to menu has been selected you can activate consult information concerning the status of the the general menu.
  • Page 61 Multifunction screens "Personalisation- Configuration" menu Example: setting of the duration of the guide- me-home lighting Press the " " or " " buttons, then the "OK" button to select the menu required. Once this menu has been selected, you can Press the "...
  • Page 62 "Telephone" Menu Display confi guration Choice of language With Audio system on, once this menu is Once this menu has been selected, you can Once this menu has been selected, you can selected you can configure your Bluetooth gain access to the following settings: change the language used by the display hands-free system (pairing), view the various brightness-video setting,...
  • Page 63 Multifunction screens 16/9 colour screen (MyWay) Displays on the screen Controls It displays the following information MyWay To select one of the applications, For more information on these applications, automatically and directly: at the control panel: refer to the "Audio and Telematics" section or time, press the dedicated "RADIO"...
  • Page 64 "SETUP" menu System language Vehicle This menu allows you to select the language This menu allows you to activate or deactivate used by the display: Deutsch, English, certain driving and comfort equipment: Espanol, Français, Italiano, Nederlands, Polski, wiper linked with reverse gear Portugues, Türkçe * .
  • Page 65 Multifunction screens...
  • Page 66 Comfort This section describes the operation of the heating, ventilation and air conditioning system, the scented air freshener and all of the adjustments for the seats, steering wheel and mirrors, for your comfort and an optimum driving position.
  • Page 68: Control Panel

    Ventilation Air intake The air circulating in the passenger compartment is filtered and originates either from the outside via the grille located at the base of the windscreen or from the inside in air recirculation mode. Air treatment The incoming air follows various routes depending on the controls selected by the driver: direct arrival in the passenger compartment...
  • Page 69 Comfort Recommendations for ventilation and air conditioning In order for these systems to be fully effective, follow the operation and maintenance If after an extended stop in sunshine, guidelines below: the interior temperature is very To obtain an even air distribution, take care not to obstruct the exterior air intake grilles high, first ventilate the passenger located at the base of the windscreen, the nozzles, the vents and the air outlets, as well compartment for a few moments.
  • Page 70 Heating/Ventilation Manual control panel Electric control panel...
  • Page 71: Manual Air Conditioning

    Comfort Manual air conditioning Manual control panel Electric control panel...
  • Page 72 1. Temperature adjustment 3. Air distribution adjustment 4. Air intake/Air recirculation Turn the dial from blue Windscreen and side windows. The intake of exterior air avoids the formation of (cold) to red (hot) to adjust mist on the windscreen and side windows. the temperature to your The recirculation of interior air insulates the passenger compartment from exterior odours...
  • Page 73: Switching Off

    Comfort 5. Air conditioning On/Off Switching on Electric control panel The air conditioning is designed to operate effectively in all seasons, Press the "A/C" button, the button's Press the button to recirculate with the windows closed. indicator lamp comes on. the interior air.
  • Page 74: Conditioning System

    Front demist - defrost These markings on the control panel indicate the control positions for rapid demisting or defrosting of the windscreen and side windows. With the heating/ventilation With the manual air With Stop & Start, when the demisting, system conditioning system air conditioning and air flow functions are activated, STOP mode is not...
  • Page 75: Automatic Operation

    Comfort Digital air conditioning On entering the vehicle, if the interior is very cold or hot, there is no need to The air conditioning operates when the engine is running, as well as in STOP mode with Stop & Start. change the value displayed in order Automatic operation to reach the required level of comfort.
  • Page 76: Manual Override

    Manual override 4. Air conditioning on/off 5. Air intake/Air recirculation It is possible to adjust one or more functions manually while leaving the other functions in automatic mode. Press this button to switch off the air Press this button for recirculation of The "AUTO"...
  • Page 77: Switching The System Off

    Comfort 6. Air distribution adjustment 7. Air fl ow adjustment Switching the system off Pressing this button several times in Press the "full fan" button to Press the air flow "empty fan" button 7 succession enables the air flow to be increase the air flow.
  • Page 78: Rear Screen Demist - Defrost

    Rear screen demist - defrost Switching on Switching off The rear screen demisting/defrosting can only The demisting/defrosting switches off If the engine is switched off before the operate when the engine is running. automatically to prevent an excessive demisting/defrosting is switched off Press this button to demist/defrost the rear consumption of current.
  • Page 79 Comfort Scented air freshener System permitting the diffusion of a fragrance in the passenger compartment in accordance with your requirements, by means of the adjustment dial and the various fragrance cartridges available. Adjustment dial Fragrance cartridge This cartridge can be removed easily. The Do not discard the original cartridge first time it is used, replace the plug with a real as this serves as a plug when no...
  • Page 80 Removing the cartridge Fitting the cartridge Press the dial and turn it a quarter of a turn Remove the cartridge from the sealing anti-clockwise. case. Remove the cartridge. Install the cartridge (flower at top left). Refit its sealing case. Press the dial and turn it a quarter of a turn clockwise.
  • Page 81: Front Seats

    Comfort Front seats Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to adapt your position for ease of driving and comfort. Manual adjustments Forwards-backwards adjustment Height adjustment Seat back angle adjustment Raise the control and slide the seat Pull the control upwards to raise or push Push the control rearwards.
  • Page 82 Additional adjustments Head restraint height adjustment The head restraint is fitted with a frame To raise the head restraint, pull it upwards. with notches which prevents it from To remove the head restraint, press the lug A lowering; this is a safety device in case and pull the head restraint upwards.
  • Page 83: Grab Handle

    Comfort To return the seat to its initial position, push the backrest rearwards. If any difficulty is encountered, simultaneously push rearwards the seat backrest angle control lever (located at the bottom of the backrest) and the backrest. Access to the rear seats Grab handle No person or object should prevent the Pull the control upwards to fold the seat back...
  • Page 84: Height Adjustment

    RACING front seats Seat consisting of a seat cushion and backrest which can be adjusted to adapt your position for maximum ease of driving and comfort. Manual adjustments Forwards-backwards adjustment Height adjustment Backrest angle adjustment Lift the control and slide the seat forwards Pull the handle upwards to raise or push Push the handle towards the rear and move or backwards.
  • Page 85 Comfort Additional adjustments Access to rear seats Grab handle Pull the handle forwards to fold the seat This ergonomic grab handle, located at the top backrest and move the seat forwards. of the side trim, serves: On repositioning, the seat returns to its as a handle to steady rear passengers initial position.
  • Page 86: Rear Seats

    Rear seats Folding the backrest Repositioning the seat backrest Straighten the seat backrest 2 and secure it. Check that the red indicator, located next to the control 1, is no longer visible. When repositioning the seat backrest, take care not to trap the seat belts. Move the corresponding front seat forward if necessary.
  • Page 87: Steering Wheel

    Comfort Steering wheel adjustment Rear head restraints These have one position for use (up) and a stowed position (down). They can also be removed. When stationary, pull the control lever to To remove a head restraint: release the adjustment mechanism. release the backrest using control 1, Adjust the height and reach to suit your tilt the backrest 2 slightly forwards,...
  • Page 88 Mirrors Door mirrors Folding From outside: lock the vehicle using the remote control or the key. From inside: with the ignition on, pull the control A in the central position rearwards. If the mirrors are folded using control A , they will not unfold when the vehicle is unlocked.
  • Page 89 Comfort Rear view mirror Manual day/night model Automatic day/night model Adjustable mirror providing a central rearward view. Equipped with an anti-dazzle system, which darkens the mirror glass: this reduces the nuisance to the driver caused by the headlamps from following vehicles, low sun... Adjustment By means of a sensor, which measures the As a safety measure, the mirrors...
  • Page 90 Access This section describes the functions of the remote control key, electric windows, central locking of doors and boot and access to the fuel filler.
  • Page 92: Unlocking The Vehicle

    Remote control key System which permits central unlocking or locking of the vehicle using the lock or from a distance. It is also used to locate and start the vehicle, as well as providing protection against theft. Unlocking the vehicle Locking the vehicle Unlocking using the remote Locking using the remote control...
  • Page 93 Access Deadlocking using the remote If one of the doors or the boot is still Deadlocking renders the exterior and control open, the central locking does not take interior door controls inoperative. Press the closed padlock to lock place. It also deactivates the manual central the vehicle completely.
  • Page 94: Ignition Switch

    Locating your vehicle Anti-theft protection Ignition switch Electronic engine immobiliser Press the closed padlock to locate your locked vehicle in a The key contains an electronic chip which has car park. a special code. When the ignition is switched on, this code must be recognised in order for starting to be possible.
  • Page 95: Starting The Vehicle

    Access Starting the vehicle Switching the vehicle off Insert the key in the ignition switch. Immobilise the vehicle. Key reminder The system recognises the starting code. Turn the key fully towards you to Turn the key fully towards the dashboard to position 1 (Stop).
  • Page 96: Changing The Battery

    Remote control problem Following disconnection of the vehicle battery, replacement of the remote control battery or in the event of a remote control malfunction, you can no longer unlock, lock or locate your vehicle. First of all, use the key in the lock to unlock or lock your vehicle.
  • Page 97: Remote Control

    Access Lost keys Do not throw the remote control batteries away, they contain metals Visit a CITROËN dealer with the vehicle's registration document, your personal which are harmful to the environment. identification documents and if possible the key code label. Take them to an approved collection The CITROËN dealer will be able to find the key code and the transponder code required point.
  • Page 98 Alarm System which protects and provides a deterrent against the theft of your vehicle. It provides two types of protection, exterior and interior, as well as a self-protection function. Exterior perimeter Interior volumetric Self-protection function protection protection The system detects the putting out of service of its components.
  • Page 99 Access Locking the vehicle with full alarm The exterior perimeter protection is activated, 5 seconds after the locking button on the remote control is pressed. The interior volumetric protection is activated, 45 seconds after the locking button on the remote control is pressed. Activation Deactivation If an opening - door or boot - is not...
  • Page 100: Locking The Vehicle

    Locking the vehicle Triggering of the alarm with exterior perimeter protection only This is indicated by sounding of the siren Deactivation of the interior Reactivation of the interior volumetric protection volumetric protection and flashing of the direction indicators for approximately thirty seconds. Switch off the ignition.
  • Page 101 Access Failure of the remote control Locking the vehicle without Automatic activation * activating the alarm 2 minutes after the last door or the boot is Unlock the vehicle using the key in the Lock or deadlock the vehicle using the key driver’s door lock.
  • Page 102: Window Controls

    Window controls System which opens or closes a window manually or automatically. It is fitted with anti-pinch protection on the driver's side. Driver's electric window There are two methods of operation: The electric window switches remain operational for approximately 45 seconds after the ignition is switched off or until a door is opened.
  • Page 103 Access Reinitialisation Safety anti-pinch In the event of a malfunction you have to Always remove the key from the ignition reinitialise the operation of the electric On the driver's side, the one-touch front electric when leaving the vehicle, even for a windows: window has a safety anti-pinch function.
  • Page 104: From Outside

    Doors Opening Closing When a door is not closed correctly: when the engine is running, this warning lamp comes on, accompanied by a message in the multifunction screen for a few seconds, when the vehicle is moving (speed higher than 6 mph (10 km/h)), this warning lamp comes on, accompanied by an audible signal and a message in the multifunction screen for a few seconds.
  • Page 105 Access Manual centralised control Automatic centralised control System which provides full automatic locking or unlocking of the doors and the boot while driving. You can activate or deactivate this function. Locking When the speed exceeds 6 mph (10 km/h), the doors and the boot lock automatically.
  • Page 106: Emergency Control

    Emergency control To lock or unlock the doors mechanically in the event of a central locking system failure or flat battery. In the event of a fault with the central locking system, you must disconnect the battery to lock the boot and so ensure the complete locking of the vehicle.
  • Page 107: Tailgate Release

    Access Boot Opening Closing Tailgate release Lower the tailgate using the interior grab handle. If the tailgate is not closed correctly: when the engine is running , this warning lamp comes on, accompanied by a message on the multifunction screen for a few seconds, when the vehicle is moving (speed above 6 mph (10 km/h)), this warning lamp comes...
  • Page 108: Low Fuel Level

    Fuel tank Fuel tank capacity: approximately 50 litres (petrol) or 46 litres (Diesel); (Depending on version: approximately 30 litres (petrol or Diesel)). Low fuel level When the fuel tank minimum level is reached this warning lamp comes on on the instrument panel. When it first comes on there remains approximately 5 litres of fuel in the tank.
  • Page 109: Petrol Engines

    Access Quality of the fuel used for Quality of the fuel used for petrol engines Diesel engines The petrol engines are perfectly compatible The Diesel engines are perfectly compatible with E10 or E24 type petrol biofuels (containing with biofuels which conform to current and 10 % or 24 % ethanol), conforming to European future European standards (Diesel fuel which standards EN 228 and EN 15376.
  • Page 110: Travelling Abroad

    Misfuel prevention (Diesel) * Mechanical device which prevents filling the tank of a Diesel vehicle with petrol. It avoids the risk of engine damage that can result from filling with the wrong fuel. Located in the filler neck, the misfuel prevention device appears when the filler cap is removed. Operation It remains possible to use a fuel can Travelling abroad...
  • Page 111 Access Deactivation With the handle vertical, introduce the tool into the filler neck as far as it will go. Turn the tool a quarter turn to the right or left. Remove the tool completely. Fill with fuel. Before refuelling using non-standard Diesel The misfuel prevention device will be fuel nozzles (present in some countries), a tool activated the next time a standard...
  • Page 112 Visibility This section describes all of the lighting and wiper controls, headlamp adjustment, the various interior lamps including the interior mood lighting and in particular, the LED lamps, a true signature of your vehicle.
  • Page 114: Lighting Controls

    Lighting controls System for selection and control of the various front and rear lamps providing the vehicle's lighting. Main lighting Programming The various front and rear lamps of the vehicle Various automatic lighting control modes In some weather conditions (e.g. low are designed to adapt the driver's visibility are also available according to the following temperature or humidity), the presence...
  • Page 115 Visibility Manual controls Displays The lighting is controlled directly by the driver Lighting of the corresponding indicator lamp on by means of the ring A and the stalk B. the instrument panel confirms the switching on of the lighting selected. The instrument panel has permanent back- lighting.
  • Page 116 C. Foglamp selection ring. In good or rainy weather, by both day The foglamps operate with the dipped and main and night, the front foglamps and the beam headlamps. rear foglamp are prohibited. In these situations, the power of their beams Front and rear foglamps may dazzle other drivers.
  • Page 117 Visibility Manual guide-me-home lighting Temporarily keeping the dipped beam headlamps on after the vehicle's ignition has been switched off makes the driver's exit easier when the light is poor. Switching on Switching off With the ignition off, "flash" the headlamps The manual guide-me-home lighting switches using the lighting stalk.
  • Page 118 Automatic illumination of headlamps Activation Operating fault Turn ring to the "AUTO" position. The In the event of a fault with the automatic illumination of headlamps is sunshine sensor, the lighting accompanied by a message in the screen. come on, this warning lamp is displayed in the instrument panel and/or a message appears Deactivation in the screen, accompanied by an audible signal.
  • Page 119: Led Lamps

    Visibility LED lamps Headlamp adjustment Daytime external lighting using specific front lamps providing a signature of the vehicle. Comprising two sets of six light emitting diodes (LEDs), they are located in the vertical scoops below each headlamp. Programming For countries where exterior lighting by day is not a legal requirement, you can activate or deactivate the function via the multifunction screen configuration menu.
  • Page 120: Wiper Controls

    Wiper controls Manual controls System for selection and control of the various The wiper commands are issued directly by the front and rear wiping modes for the elimination driver by means of the stalk A and the ring B. of rain and cleaning. The vehicle's front and rear wipers are Windscreen wipers designed to improve the driver's visibility...
  • Page 121 Visibility B. Rear wiper selection ring: park, intermittent wipe, wash-wipe (set duration). Rear wiper Reverse gear Windscreen wash When reverse gear is engaged, the rear wiper Pull the wiper stalk towards you. The will come into operation if the windscreen windscreen wash, then the windscreen wipers, If a significant accumulation of snow or wipers are operating.
  • Page 122: Windscreen Wipers

    windscreen wipers The windscreen wipers operate automatically, without any action on the part of the driver, if rain is detected (sensor behind the rear view mirror), adapting their speed to the intensity of the rainfall. Activation Switching off The automatic wiping must be This is controlled manually by the driver by This is controlled manually by the driver by moving reactivated if the ignition has been off...
  • Page 123 Visibility Vertical windscreen wiper position Operating fault If an automatic wiping fault occurs, the wipers will operate in intermittent mode. Have it checked by a CITROËN dealer or a This position allows the wiper blades to be lifted qualified workshop. To retain the effectiveness of the "flat- for winter parking, cleaning or replacement blade"...
  • Page 124: Courtesy Lamp

    Courtesy lamp Courtesy lamp Map reading lamps In this position, the courtesy lamp With the ignition on, press the comes on gradually: corresponding switch. when the vehicle is unlocked, when the key is removed from the ignition, when a door is opened, when the remote control locking button is activated, in order to locate your vehicle.
  • Page 125: Boot Lamp

    Visibility Interior mood lighting Boot lamp The dimmed passenger compartment lighting improves visibility in the vehicle when the light is poor. Switching on Switching off This comes on automatically when the boot is opened and switches off automatically when At night, the illumination of footwells and the The interior mood lighting switches off the boot is closed.
  • Page 126 Fittings The section describes the various interior fittings, the glove box, the central armrest for storage, the Jack socket or USB port for connecting a portable player, the mats for protecting the carpet, as well as the various boot fittings.
  • Page 128: Interior Fi Ttings

    Interior fi ttings Sun visor r (see details on the following page) 2. Glove box (see details on the following page) 3. Oddments storage 4. Door pocket 5. Upper storage compartment 6. Lower storage compartment with non- slip mat USB port/auxiliary socket (see details on the following pages) 8.
  • Page 129: Sun Visor

    Fittings Sun visor Glove box Centre armrest Component which protects against sunlight Comfort and storage system for the driver and To open the glove box, raise the handle. from the front or the side, also equipped with an It houses the front passenger airbag front passenger.
  • Page 130: Auxiliary Socket

    Auxiliary socket USB Player 12 V accessory socket The auxiliary socket is located in the " AUX " The USB port is located in the "AUX" box on box on the centre console. the centre console. It permits the connection of a portable device, It permits the connection of a portable device, such as a digital audio player of the iPod type,...
  • Page 131 Fittings Mats Removable carpet protection. Fitting Removal To remove the mat on the driver's side: move the seat as far back as possible, unclip the fixings, remove the mat. Refitting To avoid any risk of jamming of the pedals: To refit the mat on the driver's side: only use mats which are suited position the mat correctly, refit the fixings by pressing,...
  • Page 132: Boot Fi Ttings

    Boot fi ttings Rear parcel shelf (see the following page for details) 2. Retaining strap 3. Location for Hi-Fi amplifier 4. Stowing rings 5. Storage box (version equipped with a temporary puncture repair kit) (see the following page for details) Tool box (version equipped with a spare wheel) (refer to section "Practical...
  • Page 133: Storage Box

    Fittings Rear parcel shelf Storage box To remove the shelf: Raise the boot carpet by pulling the strap Refit the boot floor carpet by folding it unhook the two cords, upwards to gain access to the storage box. slightly in the middle. raise the shelf slightly, then unclip it on This has areas for storing a temporary puncture each side.
  • Page 134: Child Safety

    Child safety This section describes all of the possibilities for the installation of a child seat and the precautions to take to ensure optimum safety, the various recommended child seats, the ISOFIX mountings and the approved ISOFIX child seat.
  • Page 136 General points relating to child seats Although one of CITROËN's main criteria when designing your vehicle, the safety of your children also depends on you. For maximum safety, please observe the CITROËN recommends that children following recommendations: should travel in the rear seats of your in accordance with European regulations, vehicle: all children under the age of 12 or less...
  • Page 137 Child safety Child seat in the front "Rearwards-facing" "Forwards-facing" Intermediate longitudinal position When a "rearwards-facing" child seat is When a "forwards-facing" child seat is installed installed on the front passenger seat , it on the front passenger seat, adjust the is essential that the passenger airbag is vehicle's seat to the intermediate longitudinal deactivated.
  • Page 138: Passenger Airbag Off

    Refer to the advice given on the label present Passenger airbag OFF on both sides of the passenger's sun visor. To assure the safety of your child, you must deactivate the passenger's front airbag when you install a child seat in the rearwards facing position on the front passenger's seat. Otherwise, there is a risk that the child could be seriously injured or killed if the airbag were deployed.
  • Page 139 Child safety Child seats recommended by CITROËN CITROËN offers a complete range of recommended child seats which are secured using a three point seat belt: Group 0+: from birth to 13 kg Groups 1, 2 and 3: from 9 to 36 kg "KIDDY Comfort Pro"...
  • Page 140 Installing child seats attached with the seat belt In accordance with European regulations, this table indicates the options for installing child seats secured using a seat belt and universally approved (a) in accordance with the weight of the child and the seat in the vehicle. Weight of the child and indicative age Under 13 kg From 9 to 18 kg...
  • Page 141: Installing A Booster Seat

    Child safety Advice on child seats Installing a booster seat The incorrect installation of a child seat in a Children under the age of 10 must not travel vehicle compromises the child's protection in the "forward facing" position on the front The chest part of the seat belt must be in the event of an accident.
  • Page 142 "ISOFIX" mountings This ISOFIX mounting system provides fast, reliable and safe fitting of the child seat in your vehicle. The ISOFIX child seats are fitted with two latches which are secured on the two rings A. When fitting an ISOFIX child seat to the right hand rear seat, before fixing the seat in place, first move the centre rear seat belt towards the middle of the vehicle so as to not interfere with...
  • Page 143 Child safety ISOFIX child seat recommended by CITROËN and approved for your vehicle RÖMER Duo Plus ISOFIX (size category B1 ) Group 1: from 9 to 18 kg Installed only in the forwards-facing position. Fitted with an upper strap to be secured on the upper ring B , referred to as the TOP TETHER. Three seat body angles: sitting, reclining, lying.
  • Page 144: Installing Isofix Child Seats

    Installing ISOFIX child seats In accordance with European regulations, this table indicates the options for the installation of ISOFIX child seats on the vehicle seats fitted with ISOFIX mountings. In the case of the universal and semi-universal ISOFIX child seats, the child seat's ISOFIX size category, determined by a letter between A and G , is indicated on the child seat next to the ISOFIX logo.
  • Page 145 Child safety...
  • Page 146 Safety This section describes the operation of the direction indicators, hazard warning lamps and the horn to warn other road users, the emergency or assistance call in the event of an accident or breakdown, the various braking and trajectory control systems for maintaining control of your vehicle, the seat belts and airbags to reduce the risk of injury in the event of a collision.
  • Page 148: Direction Indicators

    Direction indicators Hazard warning lamps "Motorway" function Press briefly upwards or downwards, without going beyond the point of resistance; the direction indicators will flash 3 times. Selection of the left or right direction indicators A visual warning by means of the direction to signal a change of direction of the vehicle.
  • Page 149: Emergency Or Assistance Call

    Safety Horn Emergency or assistance call Automatic operation of hazard warning lamps When braking in an emergency, depending on the deceleration, the hazard warning lamps come on automatically. They switch off automatically the first time you accelerate. You can also switch them off by pressing the button.
  • Page 150: Braking Assistance Systems

    Braking assistance systems Anti-lock braking system Group of supplementary systems which help Operating fault you to obtain optimum braking in complete and electronic brake force If this warning lamp comes on, safety in emergency situations: distribution accompanied by an audible signal anti-lock braking system (ABS), and a message in the screen, electronic brake force distribution (EBFD),...
  • Page 151: Trajectory Control Systems

    Safety Trajectory control systems Emergency braking assistance Anti-slip regulation (ASR) and electronic stability System which, in an emergency, enables you programme (ESP) to obtain the optimum braking pressure more quickly, thus reducing the stopping distance. Activation The anti-slip regulation (also known as Traction Activation Control) optimises traction to prevent skidding It is triggered by the speed at which the brake...
  • Page 152 Operating fault If this warning lamp comes on, accompanied by an audible signal and a message in the multifunction screen, this indicates a malfunction of these systems. Have it checked by a CITROËN dealer or a qualified workshop. The ESP/ASR systems offer exceptional safety in normal driving, but Deactivation Reactivation...
  • Page 153: Seat Belts

    Safety Seat belts Front seat belts The front seat belts are fitted with a pretensioning and force limiting system. This system improves safety in the front seats in the event of a front or side impact. Depending on the severity of the impact, the pretensioning system instantly tightens the seat belts against the body of the occupants.
  • Page 154: Rear Seat Belts

    Rear seat belts Fastening Unfastening The rear seats are each fitted with a three-point inertia reel seat belt. Pull the strap, then insert the tongue in Press the red button on the buckle. the buckle. Guide the seat belt as it is reeled in. Check that the seat belt is fastened correctly by pulling the strap.
  • Page 155 Safety The driver must ensure that passengers use In order to be effective, a seat belt must: Recommendations for children the seat belts correctly and that they are all be tightened as close to the body as restrained securely before setting off. possible, Use a suitable child seat if the passenger Wherever you are seated in the vehicle,...
  • Page 156 Airbags System designed to maximise the safety of the occupants (with the exception of the rear centre passenger) in the event of violent collisions. It supplements the action of the force-limiting seat belts (with the exception of the rear centre passenger).
  • Page 157: Front Airbags

    Safety Front airbags Deployment System which protects the driver and front passenger in the event of a serious front impact The airbags are deployed simultaneously, in order to limit the risk of injury to the head and unless the passenger's front airbag is chest.
  • Page 158 Operating fault To assure the safety of your child, the passenger's front airbag must If this warning lamp comes on in the be deactivated when you install a instrument panel, accompanied by "rear facing" child seat on the front an audible warning and a message in passenger seat.
  • Page 159: Lateral Airbags

    Safety Lateral airbags Deployment Impact detection zones System which protects the driver and front The lateral airbags are deployed unilaterally in A. Front impact zone. passenger in the event of a serious side impact the event of a serious side impact applied to all B.
  • Page 160: Curtain Airbags

    Curtain airbags System which protects the driver and passengers (with the exception of the rear centre passenger) in the event of a serious side impact in order to limit the risk of injury to the side of the head. Each curtain airbag is built into the pillars and the upper passenger compartment area.
  • Page 161 Safety For the airbags to be fully effective, observe the following safety rules: Front airbags Curtain airbags Sit in a normal upright position. Do not drive holding the steering wheel by its Do not fix or attach anything to the roof. Wear a correctly adjusted seat belt.
  • Page 162 Driving This section describes the use of the parking brake, the manual, electronic or automatic gearbox, the gear efficiency indicator and Stop & Start to help reduce fuel consumption, hill start assist, the speed limiter to avoid exceeding a programmed speed, cruise control to maintain a programmed speed, the rear parking sensors to detect obstacles.
  • Page 164: Parking Brake

    Parking brake Releasing When parking on a slope, direct your Pull the parking brake lever fully up Pull the parking brake lever gently, press wheels against the pavement, apply the to immobilise your vehicle. the release button then lower the lever fully. parking brake and engage a gear.
  • Page 165: Speed Manual Gearbox

    Driving 6-speed manual gearbox Engaging 5th or 6th gear Engaging reverse gear Move the lever fully to the right to engage 5th or 6th gear. Raise the ring under the knob and move the gear lever to the left then forwards. Only engage reverse gear when the As a safety precaution and to facilitate vehicle is stationary with the engine at idle.
  • Page 166 Gear effi ciency indicator * Operation Example: The information appears in the instrument panel in the form of an arrow accompanied by The system intervenes only when driving the suggested gear. economically. Depending on the driving situation and your vehicle's equipment, the system may advise you to skip one or more gears.
  • Page 167: Electronic Gearbox

    Driving Electronic gearbox Gear lever Steering mounted controls Five or six-speed electronically controlled gearbox which offers a choice between the comfort of automated operation or the pleasure of manual gear changing. Two driving modes are offered: automated mode for automatic control of the gears by the gearbox, without any action by the driver, manual mode for the sequential changing...
  • Page 168: Moving Off

    Display in the instrument panel Moving off Select position N . Vehicles fitted with the 6-speed Press the brake pedal fully. electronic gearbox system then move Start the engine. off on their own (refer to the paragraph "Creep function"). You must keep your foot on the brake pedal while starting the engine.
  • Page 169 Driving Automated mode Creep function Temporary control of gear Select position A. changing (6-speed electronic gearbox AUTO and the gear engaged appear system) You can temporarily take over control of gear in the instrument panel. changes using the steering mounted "+" This function allows the vehicle to be and "-"...
  • Page 170: Manual Mode

    Manual mode Reverse Stopping the vehicle To engage reverse, the vehicle must be Before switching off the engine: Select position M. immobilised with your foot on the brake. change to position N to be in neutral, The gears engaged appear in Select position R.
  • Page 171 Driving Reinitialisation Operating fault (5-speed electronic gearbox) With the ignition on, if this warning lamp comes on and AUTO flashes, Following disconnection of the battery, it is In exceptional circumstances, the accompanied by an audible signal and a necessary to reinitialise the gearbox. gearbox may need an automatic message in the multifunction screen, this Switch on the ignition.
  • Page 172 Automatic gearbox Gear selection gate Gear lever Four-speed automatic gearbox which offers a choice between the comfort of fully automatic operation, enhanced by sport and snow programmes, or manual gear changing. Therefore, four driving modes are offered: automatic operation for electronic management of the gears by the gearbox, sport programme for a more dynamic style of driving,...
  • Page 173 Driving Displays in the instrument panel Moving off Apply the parking brake. Select position P or N. Start the engine. If this procedure is not followed, an audible signal is heard, accompanied by a message in the multifunction screen. With the engine running, press the brake pedal.
  • Page 174 Automatic operation Sport and snow Return to automatic programmes operation Select position D for automatic changing of the four gears. These two special programmes supplement the At any time, press the button selected The gearbox then operates in auto-adaptive automatic operation in very specific conditions again to quit the programme engaged and mode, without any intervention on the part of use.
  • Page 175: Manual Operation

    Driving Operating fault Manual operation When the ignition is on, the lighting of this warning lamp, accompanied Invalid value during manual Select position M for sequential changing by an audible signal and a message in the operation of the four gears. multifunction screen, indicates a gearbox fault.
  • Page 176 Stop & Start The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine restarts automatically - START mode - as soon as you want to move off. The restart takes place instantly, quickly and silently. Perfect for urban use, the Stop &...
  • Page 177 Driving Deactivation Going into engine START mode Special cases: START invoked automatically The "ECO" warning lamp goes off For reasons of safety and for your comfort, and the engine starts: START mode is invoked automatically when: you open the driver's door, with a manual gearbox , when you you unfasten the driver's seat belt, depress the clutch pedal,...
  • Page 178 Reactivation Operating fault Maintenance Press the "ECO OFF" switch again. Before doing anything under the The system is active again; this is confirmed bonnet, deactivate the Stop & Start by the switch warning lamp going off, system to avoid any risk of injury accompanied by a message in the screen.
  • Page 179: Hill Start Assist

    Driving Hill start assist Operation System which holds your vehicle temporarily (approximately 2 seconds) when starting on a slope, the time it takes to move your foot from the brake pedal to the accelerator pedal. This function is only active when: the vehicle is completely stationary, with your foot on the brake pedal, certain conditions on a slope are met,...
  • Page 180 Speed limiter Steering mounted controls Displays in the instrument panel System which prevents the vehicle from exceeding the speed programmed by the driver. When the programmed speed limit is reached, pressing the accelerator pedal in the normal manner no longer has any effect. The speed limiter is switched on manually: it requires a programmed speed of at least 20 mph (30 km/h).
  • Page 181 Driving Programming Leaving limiter mode Turn thumb wheel 1 to the "0" position: Turn thumb wheel 1 to the "LIMIT" the speed limiter mode is deselected. The position: the speed limiter mode is display returns to the distance recorder. selected but is not switched on (PAUSE). You do not have to switch the speed limiter on Operating fault in order to set the speed.
  • Page 182 Cruise control Steering mounted controls Displays in the instrument panel System which automatically maintains the speed of the vehicle at the value programmed by the driver, without any action on the accelerator pedal. The cruise control is switched on manually: it requires a minimum vehicle speed of 25 mph (40 km/h), as well as the engagement of: fourth gear on a manual gearbox,...
  • Page 183 Driving Programming Operating fault In the event of a cruise control malfunction, Turn thumb wheel 1 to the "CRUISE" the speed is cleared resulting in flashing of the position: the cruise control mode is dashes. Have it checked by a CITROËN dealer selected but is not switched on (PAUSE).
  • Page 184: Rear Parking Sensors

    Rear parking sensors Activation System consisting of four proximity sensors, The system is activated as soon as reverse located in the rear bumper. gear is engaged, accompanied by an audible This detects any obstacle (person, vehicle, signal. The proximity information is given by: tree, gate, etc.) behind the vehicle, except an audible signal, which becomes obstacles located just below the bumper.
  • Page 185: Operating Faults

    Driving Programming Operating faults You can activate or deactivate the system by If there is an operating fault, when means of the multifunction screen configuration reverse gear is engaged this menu. The system state is memorised when warning lamp comes on in the instrument panel, switching off the ignition.
  • Page 186 Checks This section describes access to the engine compartment, the procedure for bleeding the fuel system on Diesel engines after running out of fuel, the location of various engine components needed to check the levels and the main wearing parts.
  • Page 188 TOTAL & CITROËN...
  • Page 189 Checks Bonnet Protects the components of the engine and provides access for checking levels. Opening Before doing anything under the bonnet, switch off the Stop & Start system to avoid any risk of injury resulting from an automatic change to START mode.
  • Page 190: Running Out Of Fuel

    Running out of fuel (Diesel) Closing If your vehicle is fitted with an HDI engine, Fill the fuel tank with at least five litres of the fuel system must be primed if you run out Diesel. of fuel. Open the bonnet. Take the stay out of the support notch.
  • Page 191 Checks Petrol engines Screenwash fluid reservoir. 2. Coolant header tank. 3. Air filter. 4. Brake fluid reservoir. 5. Battery. 6. Fusebox. Engine oil dipstick. 8. Engine oil filler cap.
  • Page 192 Diesel engines Screenwash fluid reservoir. 2. Coolant header tank. 3. Air filter. 4. Brake fluid reservoir. 5. Battery. 6. Fusebox. Engine oil dipstick. 8. Engine oil filler cap. Priming pump (on fuel filter).
  • Page 193: Checking Levels

    Checks Checking levels Check all of these levels regularly and top them up if necessary, unless otherwise indicated. If a level drops significantly, have the corresponding system checked by a CITROËN dealer or a qualified workshop. Oil level Brake fluid level Engine oil change The reading will only be correct if The brake fluid level should be close...
  • Page 194: Coolant Level

    Screenwash fluid level Coolant level Top up the level when necessary. The coolant level should be close to the "MAX" mark but should never exceed it. When the engine is warm, the Changing the coolant Fluid specifi cation temperature of the coolant is regulated by the The coolant does not have to be changed.
  • Page 195 Checks Diesel additive level Used products (Diesel engine with particle emission filter) Avoid prolonged contact of used oil or The additive reservoir low level is fluids with the skin. indicated by fixed illumination of Most of these fluids are harmful to this warning lamp, accompanied by an audible health or indeed very corrosive.
  • Page 196: Oil Filter

    Checks Unless otherwise indicated, check these components in accordance with the servicing booklet and according to your engine. Otherwise, have them checked by a CITROËN dealer or a qualified workshop. Battery Air filter and passenger compartment filter Particle emission filter (Diesel) The battery does not require any Refer to the servicing booklet for The start of saturation of the...
  • Page 197: Manual Gearbox

    Checks Manual gearbox Brake pads Manual parking brake The gearbox does not require any Brake wear depends on the style maintenance (no oil change). of driving, particularly in the case If a loss of effectiveness of this Refer to the servicing booklet for the of vehicles used in town, over short system is noticed, the parking brake details of the level checking interval...
  • Page 198 Practical information This section describes the use of the temporary puncture repair kit, the procedures for changing a punctured wheel, a worn wiper blade and the various bulbs and fuses, as well as advice on charging the battery, towing the vehicle, maintenance recommendations and information on the range of accessories available from the dealer network.
  • Page 200: Temporary Puncture Repair Kit

    Temporary puncture repair kit Description of the kit and a sealant cartridge which permits temporary repair of a tyre so that you can drive to the nearest garage. It is designed to repair most punctures which could affect the tyre, located on the tyre tread or shoulder.
  • Page 201: Repair Procedure

    Practical information Repair procedure 1. Sealing Switch off the ignition. Uncoil the white pipe G fully. Connect the compressor's electric plug to Turn the selector A to the "sealant" Unscrew the cap from the white pipe. the vehicle's 12 V socket. position.
  • Page 202 Switch on the compressor by moving Remove the kit and screw the cap back on If after around 5 to 7 minutes the the switch B to position "I" until the tyre the white pipe. pressure is not attained, this indicates pressure reaches 2.0 bars.
  • Page 203 Practical information 2. Infl ation Turn the selector A to the "air" Connect the compressor's electric plug to Adjust the pressure using the compressor (to inflate: switch B in position "I" ; position. the vehicle's 12 V socket. to deflate: switch B in position "O" and Uncoil the black pipe H fully.
  • Page 204 Removing the cartridge Beware of discharges of fluid. The expiry date of the fluid is indicated on the cartridge. The sealant cartridge is designed for single use; even if only partly used, it must be replaced. After use, do not discard the cartridge into the environment, take it to an authorised waste disposal site or a CITROËN dealer.
  • Page 205 Practical information Checking tyre pressures/inflating accessories You can also use the compressor, without Connect the compressor's electrical injecting any product, to: connector to the vehicle's 12 V socket. check or adjust the pressure of your tyres, Start the vehicle and let the engine run. inflate other accessories (balls, bicycle Adjust the pressure using the compressor tyres...).
  • Page 206: Changing A Wheel

    Changing a wheel Procedure for changing a faulty wheel for the spare wheel using the tools provided with the vehicle. Access to the tools Wheel with trim When removing the wheel , first detach the trim using the wheelbrace 1 pulling at the valve passage hole.
  • Page 207 Practical information Access to the spare wheel The spare wheel is installed in the boot under Taking out the wheel Fitting the "space-saver" the floor. Unscrew the yellow central bolt. type spare wheel According to country, you will have either a Raise the spare wheel towards you from "space saver"...
  • Page 208 Putting the wheel back in place Put the wheel back in its housing. Put the box back in place in the centre of On vehicles equipped with a "space- Unscrew the yellow central bolt by a the wheel and clip it. saver"...
  • Page 209: Removing A Wheel

    Practical information Removing a wheel Parking the vehicle Immobilise the vehicle where it does not block traffic: the ground must be level, stable and not slippery. Apply the parking brake, switch off the ignition and engage first gear * to lock the wheels. If necessary, place a chock under the wheel diagonally opposite the wheel to be changed.
  • Page 210 Place the jack 2 in contact with one of the Extend the jack 2 until its base plate is in Remove the bolts and store them in a clean two front A or rear B locations provided contact with the ground. Ensure that the place.
  • Page 211: Fitting A Wheel

    Practical information Fitting a wheel After changing a wheel To store the punctured wheel in the boot correctly, first remove the central cover. When using the "space-saver" type temporary-use spare wheel, do not exceed 50 mph (80 km/h). Have the tightening of the bolts and the pressure of the spare wheel checked by a CITROËN dealer or a qualified workshop without delay.
  • Page 212: Driving In Winter Conditions

    RACING tyres Driving in winter conditions The 215/40 R18 89W tyres fitted as standard are not suitable for severe winter conditions. CITROËN recommends that you use suitable winter tyres during periods of very cold weather. If you want to fit snow chains or anti- slip covers to your vehicle, contact Lower the vehicle fully.
  • Page 213: Changing A Bulb

    Practical information Changing a bulb Front lamps The headlamps are fitted with Do not touch the bulb directly with polycarbonate glass with a protective your fingers, use lint-free cloths. coating: Changing a bulb should only be done do not clean them using a dry after the headlamp has been switched or abrasive cloth, nor with a off for a few minutes (risk of serious...
  • Page 214 Changing direction indicator Changing dipped beam headlamp bulbs bulbs Remove the protective cover by pulling on Amber coloured bulbs, such as the Rapid flashing of the direction indicator the tab. warning lamp (right or left) indicates the direction indicators, must be replaced Disconnect the bulb connector.
  • Page 215 Practical information Changing main beam headlamp Changing sidelamp bulbs Changing integrated direction bulbs indicator side repeaters Remove the protective cover by pulling on Remove the protective cover by pulling on the tab. Insert a screwdriver towards the centre of the tab. Pull the bulb holder pressing on the tabs on the repeater between the repeater and the Disconnect the bulb connector.
  • Page 216 Changing front foglamp bulbs Changing the LED lamps To obtain a replacement module, Access to the front foglamp is through contact your CITROËN dealer or the aperture below the bumper. For the replacement of this type of LED lamp, a qualified workshop. contact a CITROËN dealer or a qualified Disconnect the black bulb holder If you experience any difficulty in...
  • Page 217: Rear Lamps

    Practical information Rear lamps Brake lamps/sidelamps (P21/5W). Changing bulbs 2. Sidelamps (P5W). Open the boot. Spread the four tabs and remove the bulb 3. Direction indicators (PY21W amber) Remove the access flap from the holder. 4. Foglamp, right hand side (PR21W red) corresponding side trim panel.
  • Page 218 Changing the number plate lamp Third brake lamp (4 W5W bulbs) Third brake lamp (LEDs) bulbs (W5W) Open the boot. For the replacement of this type of LED lamp, Insert a thin screwdriver into one of Remove the plugs A on the inner panel. contact a CITROËN dealer or a qualified the outer holes of the lens.
  • Page 219: Interior Lighting

    Practical information Interior lighting Footwell and central storage Boot lamp (W5W) illumination (W5W) Detach the unit by pushing it rearwards. Detach the unit for access to the bulb. Interior lamp (1/W5W) Detach the cover of the interior lamp 1 with a thin screwdriver, close to the button, to access the failed bulb.
  • Page 220: Changing A Fuse

    Changing a fuse Access to the tools Changing a fuse Installing electrical accessories Your vehicle’s electrical system is designed to operate with standard or optional equipment. Before installing other electrical Good Failed equipment or accessories on your Before changing a fuse, the cause of vehicle, contact a CITROËN dealer or a the failure must be identified and rectified.
  • Page 221 Practical information Dashboard fusebox Fuse tables Fuse N° Rating Functions FH36 Trailer relay unit. FH37 Not used. FH38 20 A Hi-Fi amplifier. FH39 Not used. FH40 40 A Trailer relay unit. The fusebox is loacted inside the glove box. Fuse N° Rating Functions 15 A...
  • Page 222 Fuse N° Rating Functions Multifunction screen, audio system, navigation radio, alarm 20 A control unit, alarm siren. 30 A 12 V socket, portable navigation support supply. 15 A Steering wheel controls. 15 A Ignition, diagnostic socket, automatic gearbox control unit. 15 A Rain/brightness sensor, trailer relay unit.
  • Page 223: Engine Compartment

    Practical information Engine compartment fusebox Access to the fuses The fusebox is placed in the engine compartment near the battery (left-hand side). Unclip the cover. Change the fuse (see corresponding paragraph). When you have finished, close the cover All work on the fuses in this box, carefully to ensure the sealing of the located on the battery, must be carried fusebox.
  • Page 224: Fuse Table

    Fuse table Fuse N° Rating Functions Engine control unit supply, cooling fan unit control relay, multifunction engine control main relay, injection pump 20 A (Diesel). 15 A Horn. 10 A Front/rear wash-wipe. 20 A LED lamps. Diesel heater (Diesel), particle filter additive pump (Diesel), air flow sensor (Diesel), EGR electrovalve (Diesel), 15 A blow-by heater and electrovalves (VTi).
  • Page 225 Practical information Fuse N° Rating Functions 30 A Windscreen wipers slow/fast speed. 40 A Built-in systems interface supply (ignition positive). 30 A Valvetronic supply (VTi). 10 A Right-hand main beam headlamps. 10 A Left-hand main beam headlamps. 15 A Left-hand dipped beam headlamps. 15 A Right-hand dipped beam headlamps.
  • Page 226 Table of maxi-fuses Fuse N° Rating Functions MF1* 60 A Fan assembly. MF2* 30 A ABS/ESP pump. MF3 * 30 A ABS/ESP electrovalves. MF4 * 60 A Built-in Systems Interface (BSI) supply. MF5 * 60 A Built-in Systems Interface (BSI) supply. MF6 * 30 A Additional cooling fan unit (THP).
  • Page 227 Practical information Battery Procedure for charging your battery when it is flat or for starting the engine using another battery. Access to the battery Starting using another The presence of this label, in particular battery with the Stop & Start system, indicates the use of a 12 V lead-acid battery with special technology and specification;...
  • Page 228: Charging The Battery Using A Battery Charger

    Charging the battery using a battery charger Start the slave vehicle. Batteries contain harmful substances Operate the starter of the broken down such as sulphuric acid and lead. They vehicle and let the engine run. must be disposed of in accordance Wait until the engine returns to idle and with regulations and must not, in any disconnect the cables.
  • Page 229: Energy Economy Mode

    Practical information Energy economy mode System which manages the period of use of certain functions to conserve a sufficient level of charge in the battery. After the engine has stopped, you can still use functions such as the audio equipment, windscreen wipers, dipped beam headlamps, courtesy lamps, etc.
  • Page 230 Load reduction mode Changing a front or rear wiper blade System which manages the use of certain Procedure for replacing a worn wiper blade with a new one without the use of tools. functions according to the level of charge remaining in the battery.
  • Page 231: Towing The Vehicle

    Practical information Towing the vehicle Procedure for having your vehicle towed or for towing another vehicle using a removable towing eye. Access to the tools General recommendations Observe the legislation in force in your country. Ensure that the weight of the towing vehicle is higher than that of the towed vehicle. The driver must stay at the wheel of the towed vehicle.
  • Page 232: Towing Your Vehicle

    Towing your vehicle Towing another vehicle Failure to observe this special condition could result in damage to certain components (braking, transmission...) and the absence of braking assistance the next time the engine is started. On the front bumper, unclip the cover by Unlock the steering by turning the key one On the rear bumper, unclip the cover by pressing at the bottom.
  • Page 233: Towing A Trailer

    Practical information Towing a trailer, ... Driving advice Distribution of loads We recommend the use of genuine Distribute the load in the trailer so that the CITROËN towbars and their harnesses heaviest items are as close as possible to that have been tested and approved the axle and the nose weight approaches the from the design stage of your vehicle, maximum permitted without exceeding it.
  • Page 234 RACING towbar Cooling Tyres Towing a trailer on a slope increases the Check the tyre pressures of the towing temperature of the coolant. vehicle and of the trailer, observing the As the fan is electrically controlled, its cooling recommended pressures. capacity is not dependent on the engine speed.
  • Page 235: Advice On Care And Maintenance

    Practical information Advice on care and maintenance Recommendations on the care and maintenance your vehicle are given in the servicing booklet. Matt paint If you vehicle is finished with a clear matt We recommend the use of a high pressure Never clean the vehicle without water.
  • Page 236 Accessories A wide range of accessories and genuine parts is available from the CITROËN dealer network. These accessories and parts have been tested and approved for reliability and safety. They are all adapted to your vehicle and benefit from CITROËN's recommendation and warranty. "Comfort": "Styling": "Protection":...
  • Page 237 Practical information "Multimedia": By visiting a CITROËN dealer, you can also obtain cleaning and maintenance products hands-free system, audio systems, semi- (interior and exterior) - including ecological integral satellite navigation system, portable products from the "TECHNATURE" range, navigation systems, mapping update CD, products for topping up (screenwash fluid...), speed camera warning, DVD player, reversing touch-up pens and paint aerosols for the exact...
  • Page 238: Technical Data

    Technical data This section contains the specifications of your vehicle depending on its engine and gearbox, such as the maximum power and torque, unladen and maximum weights, trailer weights, exterior dimensions and all of its identification markings.
  • Page 240 MODELS: ENGINES AND GEARBOXES 5FV8 Model codes: 8FP0 8FP0/P 5FS0 5FS9 5FN8 * SA... 5FM8** THP 155 PETROL ENGINES VTi 95 VTi 120 THP 150 * THP 160 ** Cubic capacity (cc) 1 397 1 598 1 598 Bore x stroke (mm) 77 x 75 77 x 85.8 77 x 85.8...
  • Page 241 Technical data ENGINE AND GEARBOX - RACING MODELS: 5FF8 5FD8 Model codes: SA... PETROL ENGINE Cubic capacity (cc) 1 598 Bore x stroke (mm) 77 x 85.8 Max power: EU standard (kW) Max power engine speed (rpm) 6 000 Max torque: EU standard (Nm) Max torque engine speed (rpm) 2 000 Fuel...
  • Page 242 WEIGHTS AND TOWED LOADS (in kg) THP 155 Petrol engines VTi 95 VTi 120 THP 150* THP 160 ** Gearboxes Manual Electronic Manual Automatic Manual 5FV8 Model codes: 8FP0 8FP0/P 5FS0 5FS9 5FN8* SA... 5FM8** Unladen weight 1 075 1 079 1 075 1 089 1 090...
  • Page 243 Technical data WEIGHTS (in kg) - RACING Petrol engine Gearbox Manual Manual Model codes: SA... 5FF8 5FD8 Unladen weight 1 165 Kerb weight 1 240 Gross vehicle weight (GVW) 1 597 Gross train weight (GTW) 1 597 on a 12 % gradient Braked trailer (within the GTW limit) on a 12 % slop Braked trailer (with transfer of load within...
  • Page 244 MODELS: ENGINE AND GEARBOX Model codes: 8FR0/GPL SA... LPG ENGINE VTi 95 Cubic capacity (cc) 1 397 Bore x stroke (mm) 77 x 75 Max. power: EU standard (kW) Max. power speed (rpm) 6 000 Max torque: EU standard (Nm) Max.
  • Page 245 Technical data WEIGHTS AND TOWED LOADS (in kg) LPG engines VTi 95 Gearbox Manual Model codes: 8FR0/GPL SA... Unladen weight 1 152 Kerb weight 1 227 Gross vehicle weight (GVW) 1 552 Gross train weight (GTW) 2 452 on a 12 % slope Braked trailer (within GTW limit) on a 12 % slope Braked trailer * (with load transfer within the...
  • Page 246 MODELS: ENGINES AND GEARBOXES Model codes: 8HR4 8HP4/PS 9HPK/S 9HP8/PS 9HR8/S SA... DIESEL ENGINES HDi 70 PEF e-HDi 70 PEF e-HDi 90 PEF e-HDi 110 PEF Cubic capacity (cc) 1 398 1 560 1 560 Bore x stroke (mm) 73.7 x 82 75 x 88.3 75 x 88.3 Max power: EU standard (kW)
  • Page 247 Technical data WEIGHTS AND TOWED LOADS (in kg) Diesel engines HDi 70 PEF e-HDi 70 PEF e-HDi 90 PEF e-HDi 110 PEF Gearbox Manual Electronic Manual Electronic Manual Model codes: 8HR4 8HP4/PS 9HPK/PS 9HP8/PS 9HR8/S SA... Unladen weight 1 070 1 080 1 085 1 090...
  • Page 248 Dimensions (in mm)
  • Page 249 Technical data Bumpers and lower body Your vehicle has reduced ground clearance. Take care when traversing kerbs, speed humps, access ramps, fords, unmade roads…...
  • Page 250: Identifi Cation Markings

    Identifi cation markings It bears the following information: the tyre pressures, for unladen and laden conditions, the wheel rim and tyre sizes, the brands of tyre recommended by the manufacturer, the spare tyre inflation pressure, the paint colour code. Wheels which are fitted with 205/45 R17 tyres cannot be fitted with snow chains.
  • Page 251 Technical data...
  • Page 252 Audio and telematics This section covers emergency and assistance calls, as well as the functions of the audio-navigation units, such as MP3-compatible player, USB player, Bluetooth system, MyWay with 16/9 colour screen, auxiliary inputs, Hi-Fi audio system.
  • Page 255 EMERGENCY OR ASSISTANCE CALL...
  • Page 256 MyCITROËN personal space, via the CITROËN Internet website www.citroen.co.uk. For technical reasons, particularly to improve the quality of Telematic services to customers, the manufacturer reserves the right to carry out * These services are subject to conditions and availability.
  • Page 257 MyWay MULTIMEDIA AUDIO SYSTEM/BLUETOOTH TELEPHONE SATELLITE NAVIGATION SYSTEM FOR EUROPE BY SD CARD CONTENTS The MyWay is protected in such a way that it will only operate in your vehicle. If it is to be installed in another 01 First steps vehicle, contact a CITROËN dealer for confi...
  • Page 258 Engine not running: Short press: on/off. Long press: audio settings: front/rear Selection dial for the fader, left/right balance, bass/treble, Long press: pause with CD screen display and musical ambience, loudness, automatic play, mute for radio. according to the menu. Access to the volume, reinitialise settings.
  • Page 259: Steering Mounted Controls

    02 STEERING MOUNTED CONTROLS RADIO: change to the next radio station in the list. Long press: automatic search for a higher frequency. RADIO: select the previous/next pre-set station. CD: select the next track. Select the next entry in the address book. CD: continuous press: fast forward play.
  • Page 260: General Operation

    03 GENERAL OPERATION Press the MODE button several times in succession for access to the following menus: RADIO / MUSIC MEDIA PLAYERS FULL SCREEN MAP TELEPHONE (If a conversation is in progress) NAVIGATION (If guidance is in progress) TRIP COMPUTER SETUP: system language * , date and time * , display, TRAFFIC:...
  • Page 261 03 GENERAL OPERATION DISPLAY ACCORDING TO THE CONTEXT NAVIGATION (IF GUIDANCE IS IN PROGRESS): TRIP COMPUTER: A press on the OK dial gives access to short-cut menus according to the display Abort guidance Alert log on the screen. Repeat advice Status of functions Block road Route info...
  • Page 262 03 GENERAL OPERATION DISPLAY ACCORDING TO THE CONTEXT MUSIC MEDIA PLAYERS: RADIO: FULL SCREEN MAP: Traffi c info (TA) In FM mode Abort guidance/Resume guidance Play options Traffi c info (TA) Set destination Normal order POIs nearby Random track Radiotext Position info Repeat folder Regional prog.
  • Page 263: Navigation - Guidance

    NAVIGATION - GUIDANCE Insert the SD card in the front panel reader and leave it there to use the Navigation functions. SELECTING A DESTINATION The navigation SD card data must not be modifi ed. Map data updates are available from CITROËN dealers. Select the "Address input"...
  • Page 264 NAVIGATION - GUIDANCE Turn the dial and select OK. Then select "Start route guidance" Press the dial to confi rm. and the press the dial to confi rm. Start route guidance To speed up the process, the post code can be entered directly after selecting the "Postal code"...
  • Page 265 NAVIGATION - GUIDANCE SETTING AND NAVIGATING TO MY "HOME ADDRESS" To be set as the "Home address", an address must fi rst be Select your home address and confi rm. entered in the address book, for example from "Destination Then select "Edit entry" and confi rm. input"/"Address input"...
  • Page 266: Route Options

    NAVIGATION - GUIDANCE The route selected by the MyWay system depends directly on the route ROUTE OPTIONS options. Changing these options may change the route completely. Select the "Route dynamics" function. Press the NAV button. This function gives access to the "Traffi...
  • Page 267: Adding A Stopover

    NAVIGATION - GUIDANCE Stopovers can be added to the route once the destination has been ADDING A STOPOVER selected. Enter a new address, for example. Press the NAV button. Address input Press the NAV button again or select Once the new address has been the Navigation Menu function and entered, select OK and press the dial press the dial to confi...
  • Page 268: Searching For Points Of Interest

    NAVIGATION - GUIDANCE SEARCHING FOR POINTS OF INTEREST The points of interest (POI) indicate all of the service locations in the (POI) vicinity (hotels, various businesses, airports...). Select the "POI in city" function to search for POIs in the city required. Press the NAV button.
  • Page 269 This icon appears when several POIs are grouped 04 NAVIGATION - GUIDANCE together in the same area. Zooming in on this icon shows details of the POIs. LIST OF PRINCIPAL POINTS OF INTEREST (POI) Service station Cinema Airport Theme parks LPG station Railway station Garage...
  • Page 270: Navigation Settings

    (traffi c The detailed procedure for updating POIs is available at the information, alert messages…). following internet address: citroen.navigation.com. This requires an SDHC (High Capacity) compatible reader. Navi volume...
  • Page 271 TRAFFIC INFORMATION TMC (Traffi c Message Channel) messages contain information on traffi c and weather conditions, received in real time and transmitted to the driver in the form of audible announcements and symbols on the navigation map. CONFIGURE THE FILTERING AND The navigation system can then suggest an alternative route to avoid a traffi...
  • Page 272: Traffic Information

    TRAFFIC INFORMATION PRINCIPAL TMC SYMBOLS RECEIVING TA MESSAGES Black and blue triangle: general information, for example: the station transmits TA messages. the station does not transmit TA messages. TA messages are not activated. The TA (Traffi c Announcement) function gives priority to TA alert messages.
  • Page 273: Radio

    The external environment (hill, building, tunnel, underground car park...) RADIO may interfere with the reception, including in RDS following mode. This phenomenon is a normal result of the way in which radio waves are transmitted and does not in any way indicate a failure of the audio equipment. SELECTING A STATION RDS - REGIONAL MODE When the current radio station is...
  • Page 274: Music Media Players

    07 MUSIC MEDIA PLAYERS CD, MP3/WMA CD INFORMATION AND ADVICE The MyWay will only play audio fi les with the extension ".mp3" The MP3 format, an abbreviation of MPEG 1, 2 & 2.5 Audio Layer 3 with a speed of between 8 Kbps and 320 Kbps and the extension and the WMA format, an abbreviation of Windows Media Audio and ".wma"...
  • Page 275: Selecting/Playing Music Cd, Mp3/Wma Cd

    MUSIC MEDIA PLAYERS SELECTING/PLAYING MUSIC CD, MP3/WMA CD Select the music source required: Press the MUSIC button. CD, MP3/WMA CD. Press the dial to confi rm. Play begins. Press the up or down button to select The list of tracks or MP3/WMA fi les appears under Music Menu. the next/previous folder.
  • Page 276: Using The External Input (Aux)

    MUSIC MEDIA PLAYERS USING THE EXTERNAL INPUT (AUX) JACK/USB AUDIO CABLE NOT SUPPLIED Connect the portable device (MP3/ WMA player…) to the auxiliary JACK socket or to the USB port, using a suitable audio cable. Press the MUSIC button then press it again or select the Music Menu function and press the dial to confi...
  • Page 277: Bluetooth Telephone

    The ignition must be on. Search phone Enter the authentication code on the telephone. Visit www.citroen.co.uk for more information (compatibility, The code to be entered is displayed on the screen more help, ...). of the system.
  • Page 278: Connecting A Telephone

    MyWay must be few minutes * . carried out with the vehicle stationary. The ignition must be on. Visit www.citroen.co.uk for more information (compatibility, more help, ...). When a telephone is already...
  • Page 279: Receiving A Call

    BLUETOOTH TELEPHONE RECEIVING A CALL MAKING A CALL Press the PHONE button. An incoming call is announced by a ring and a superimposed display on the multifunction screen. The list of the last 20 calls made and received in the vehicle appears under Phone Menu.
  • Page 280: Configuration

    CONFIGURATION The SETUP function gives access to the following options: System SETTING THE DATE AND TIME language, Date & Time, Display (Brightness, Colour, Map colour), Vehicle, Units, System. These settings must be entered again if the battery has been disconnected. Select the "Date format"...
  • Page 281: Screen Menu Map

    SCREEN MENU MAP Vocal Within 6 miles (10 km) MAIN FUNCTION Loudness Within 30 miles (50 km) OPTION A Speed dependent volume Within 60 miles (100 km) option A1 Reset sound settings option A2 OPTION B... "Music" Menu RADIO "Radio" Menu Select music Waveband Sound settings...
  • Page 282 Classic Start route guidance Rearrange route Jazz Postal code Replace stopover Rock/Pop Save to address book Delete stopover Techno Intersection Recalculate Vocal City district Fast route Loudness Geo position Short route Speed dependent volume Optimized route Reset sound settings Navigate HOME POI search Choose from address book POI nearby...
  • Page 283 Optimized route "Phone" Menu "SETUP" menu Route dynamics Traffi c independent System language * Semi-dynamic Dial from address book Deutsch Avoidance criteria Call lists English Avoid motorways Connect phone Español Avoid toll roads Search phone Français Phones connected Italiano Recalculate Disconnect phone Nederlands Settings...
  • Page 284 Display Units Brightness Temperature Celsius Colour Pop titanium Fahrenheit Toffee Metric/Imperial Blue steel Kilometres (Consumption: l/100) Technogrey Kilometres (Consumption: km/l) Miles (Consumption: MPG) Dark blue Map colour System Day mode for map Factory reset Night mode for map Software version Auto.
  • Page 285: Frequently Asked Questions

    FREQUENTLY ASKED QUESTIONS QUESTION ANSWER SOLUTION There is a difference in For optimum sound quality, the audio settings (Volume, Bass, Treble, Check that the audio settings (Volume, Bass, sound quality between Ambience, Loudness) can be adapted to the different sound sources, Treble, Ambience, Loudness) are adapted to the different audio which may result in audible differences when changing source (radio,...
  • Page 286 QUESTION ANSWER SOLUTION The stored stations do An incorrect waveband is selected. Press the BAND AST button to return to the not function (no sound, waveband (AM, FM1, FM2, FMAST) on which the 87.5 Mhz is displayed...). stations are stored. The quality of reception The vehicle is too far from the transmitter used by the station listened Activate the RDS function to enable the system...
  • Page 287 QUESTION ANSWER SOLUTION TA is selected. However, On starting, it is several minutes before the system begins to receive the Wait until the traffi c information is being received certain traffi c jams traffi c information. correctly (displaying of the traffi c information along the route are not symbols on the map).
  • Page 288 QUESTION ANSWER SOLUTION There is a long waiting When a new medium is inserted, the system reads a certain amount of This phenomenon is normal. time after inserting a CD. data (directory, title, artist, etc.). This may take a few seconds. I cannot connect my The telephone's Bluetooth function may be deactivated or the equipment Check that your telephone's Bluetooth...
  • Page 289: Audio System

    Audio system AUDIO SYSTEM/BLUETOOTH CONTENTS 01 First steps Your Audio system is coded in such a way that it will only operate in your vehicle. If it is to be installed in 02 Steering mounted controls another vehicle, contact your CITROËN dealer for confi...
  • Page 290: First Steps

    01 FIRST STEPS Display the list of Audio settings: front/ Select source: local stations. rear fader, left/right radio, audio CD/MP3 CD, USB, Select wavebands balance, bass/treble, Long press: CD Jack connection, Streaming, FM1, FM2, FMast and loudness, audio tracks or MP3 folders Abandon the current AUX.
  • Page 291: Steering Mounted Controls

    02 STEERING MOUNTED CONTROLS Radio: automatic search for a higher frequency. Radio: select the previous/next pre-set station. CD/MP3/USB: selection of the next track. USB: select genre/artist/folder from the CD/USB: continuous press: fast forwards classifi cation list. play. Select the previous/next item in a menu. Move in the list.
  • Page 292: Main Menu

    03 MAIN MENU TELEPHONE : Bluetooth hands-free, AUDIO FUNCTIONS : pairing, management radio, CD, USB, options. of a call. > MONOCHROME SCREEN C TRIP COMPUTER: PERSONALISATION- entering of distances, CONFIGURATION: alerts, status of functions. vehicle parameters, display, languages. > MONOCHROME SCREEN A For a detailed global view of the menus available, refer to the "Screen menu map"...
  • Page 293: Audio

    The external environment (hills, buildings, tunnels, basement car parks, ...) may AUDIO block reception, including in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does not indicate any failure of the audio system. RADIO SELECTING A STATION Press the SOURCE button several...
  • Page 294: Playing A Cd

    AUDIO RECEIVING TA MESSAGES PLAYING A CD The TA (Traffi c Announcement) function gives priority to TA alert Insert circular compact discs only. messages. To operate, this function needs good reception of a Some anti-pirating systems, on original discs or CDs copied using a radio station transmitting this type of message.
  • Page 295 AUDIO MP3 CD MP3 CD PLAYING AN MP3 COMPILATION INFORMATION AND ADVICE Insert an MP3 compilation in the player. The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3, The audio equipment searches for all of the music tracks, which is an audio compression standard which permits the recording of may take anything between a few seconds and several tens of several tens of music fi...
  • Page 296: Usb Box

    USB BOX The list of compatible equipment and the compression rates supported q p p USING THE USB BOX are available from CITROËN dealers. CONNECTING A USB MEMORY STICK This unit consists of a USB port and an auxiliary Connect the memory stick to the port, directly or Jack socket * .
  • Page 297: Using The Usb Port

    USB BOX USING THE USB PORT Press one of these buttons to gain Press and hold LIST to display the access to the previous/next track on different classifi cations. the classifi cation list currently being Select by Folder/Artist/Genre/Playlist, played. press OK to select the classifi cation Press and hold one of the buttons for required, then press OK again to confi...
  • Page 298 USB BOX USING THE AUXILIARY INPUT (AUX) ADJUSTING THE VOLUME OF THE AUXILIARY SOURCE JACK socket or USB port (according to vehicle) The auxiliary input, JACK or USB, allows the connection of a portable device (MP3 player...). First adjust the volume of your portable device. Do not connect a device to both the JACK socket and the USB port at the same time.
  • Page 299 * If your telephone is fully compatible. and the ignition on. Select the telephone to be connected from the list. Only one Go to www.citroen.co.uk for more information (compatibility, more telephone can be connected at a time. help, ...). Activate the telephone's Bluetooth function A virtual keypad is displayed in the and ensure that it is "visible to all"...
  • Page 300: Bluetooth Functions

    BLUETOOTH FUNCTIONS RECEIVING A CALL MAKING A CALL An incoming call is announced by a ring and a superimposed From the Bluetooth telephone function Audio menu, select Manage display in the vehicle's screen. the telephone call then Call, Call list or Directory. Press the steering mounted control for more than Select the YES tab on the display two seconds for access to your directory, then...
  • Page 301: Bluetooth Audio Streaming

    BLUETOOTH FUNCTIONS BLUETOOTH AUDIO STREAMING * Wireless transmission of the telephone's music fi les via the audio Activate the streaming source by equipment. The telephone must be able to manage the appropriate pressing the SOURCE button ** . Bluetooth profi les (Profi les A2DP/AVRCP). The tracks to be played can be controlled as usual via the buttons on the audio system control panel and...
  • Page 302: Configuration

    CONFIGURATION SETTING THE DATE AND TIME SCREEN A Press the MENU button. Press to confi rm the selection. MENU Using the arrows, select DISPLAY Adjust the setting. CONFIGURATION. Press to confi rm the selection. Press to confi rm the selection. Start again from step 1 then set Using the arrows, select YEAR.
  • Page 303 CONFIGURATION SETTING THE DATE AND TIME SCREEN C Press the MENU button. Press to confi rm the selection. MENU Using the arrows, select Using the arrows, select ADJUST PERSONALISATION DATE AND TIME. CONFIGURATION. Press to confi rm the selection. Press to confi rm the selection. Adjust the settings one by one Using the arrows, select DISPLAY confi...
  • Page 304: Screen Menu Map

    08 SCREEN MENU MAP MONOCHROME A RADIO-CD OPTIONS RDS SEARCH DIAGNOSTICS REG MODE CONSULT MAIN FUNCTION CD REPEAT ABANDON OPTION A RANDOM PLAY OPTION A1 OPTION A2 VEHICLE CONFIG * OPTION B... REV WIPE ACT GUIDE LAMPS * The parameters vary according to vehicle.
  • Page 305 SCREEN MENU MAP DISPLAY ADJUST LANGUAGE UNITS YEAR FRANCAIS TEMPERATURE: °CELSIUS/°FAHRENHEIT FUEL CONSUMPTION: MONTH ITALIANO KM/L - L/100 - MPG DATE NEDERLANDS HOUR PORTUGUES MINUTES PORTUGUES-BRASIL 12 H/24 H MODE DEUTSCH ENGLISH ESPANOL...
  • Page 306 MONOCHROME C Press the OK dial for access to short-cut menus according to the display on the screen: CD/MP3 CD RADIO activate/deactivate Intro activate/deactivate track repeat activate/deactivate RDS (of the current folder/artist/genre/playlist) activate/deactivate track repeat activate/deactivate REG mode (the entire current CD for CD, the entire current folder for MP3 CD) activate/deactivate radiotext activate/deactivate random play...
  • Page 307: Audio Functions

    SCREEN MENU MAP MONOCHROME C TRIP COMPUTER AUDIO FUNCTIONS Pressing the MENU button displays: ENTER DISTANCE TO DESTINATION FM BAND PREFERENCES Distance: x miles alternative frequencies (RDS) ALERT LOG activate/deactivate Diagnostic s regional mode (REG) STATUS OF THE FUNCTIONS * activate/deactivate Functions activated or deactivated radio-text information (RDTXT)
  • Page 308 08 SCREEN MENU MAP PERSONALISATION-CONFIGURATION BLUETOOTH TELEPHONE DEFINE THE VEHICLE PARAMETERS * Bluetooth confi guration DISPLAY CONFIGURATION Connect/Disconnect a device video brightness adjustment Telephone function normal video Audio Streaming function inverse video Consult the paired device brightness (- +) adjustment Delete a paired device date and time adjustment Perform a Bluetooth search...
  • Page 309: Frequently Asked Questions

    FREQUENTLY ASKED QUESTIONS QUESTION ANSWER SOLUTION There is a difference in For optimum sound quality, the audio settings (Volume, Bass, Treble, Check that the audio settings (Volume, Bass, sound quality between Ambience, Loudness) can be adapted to the different sound sources, Treble, Ambience, Loudness) are adapted to the the different audio which may result in audible differences when changing source...
  • Page 310 QUESTION ANSWER SOLUTION The stored stations do An incorrect waveband is selected. Press the BAND AST button to return to the not function (no sound, waveband (AM, FM1, FM2, FMAST) on which 87.5 Mhz is displayed...). the stations are stored. The traffi...
  • Page 312 Index Visual search - Alphabetical index...
  • Page 314 Exterior opening/closing anti-theft protection starting battery Accessories 234-235 Wiper controls 118-121 Changing a wiper blade Lighting controls 112-117 Headlamp adjustment Boot Changing bulbs 211-214 Temporary puncture front lamps repair kit 198-203 foglamps Changing a wheel 204-210 direction indicator repeaters tools removing/refitting Door mirrors Changing bulbs...
  • Page 315 Visual search Interior Interior fittings 126-129 auxiliary sockets centre armrest Glove box Front seats 79-81, 82-83 Deactivating the passenger’s airbag 156 Boot fittings 130-131 rear parcel shelf retaining strap stowing rings Child seats 134-139 ISOFIX mountings 140-142 Rear seats 84-85 Seat belts 151-153 Airbags...
  • Page 316 Instruments and controls Instrument panels 28-29, 30-31 Rear view mirror Warning lamps 32-41 Sun visor Lighting controls 112-117 Indicators 42-45 Headlamp adjustment Adjustment buttons 46-47 trip distance recorder panel lighting dimmer/black panel Speed limiter 178-179 Cruise control 180-181 Wiper controls 118-121 Scented air freshener 77-78...
  • Page 317 Visual search Technical data - Maintenance Petrol engines 238-241 LPG engine 242-243 Diesel engine 244-245 Dimensions 246-247 Identification markings Checking components 194-195 Running out of Diesel battery air filter/passenger compartment filter oil filter particle emissions filter (Diesel) brake pads/discs Checking levels 191-193 brake fluid coolant...
  • Page 318 ABS and EBFD systems ......148 Automatic rain sensitive windscreen Capacity, fuel tank ........106 Accessories ..........234 wipers ..........118, 120 CD MP3..........273, 293 Accessory socket, 12 V ......128 Auxiliary socket....128, 274, 294, 296 Central locking ........90, 103 Access to rear seats ....... 81, 83 Changing a bulb ........
  • Page 319 Alphabetical index Date (setting)......278, 300, 301 Energy economy mode.......227 G.P.S............261 Deactivating the passenger airbag.....156 Engines ........238, 242, 244 Gearbox, automatic ......170, 195 Deadlocking ..........91 Engine, Diesel ......107, 190, 244 Gearbox, electronic..... 165, 174, 195 Defrosting ..........70, 73, 76 Engine, petrol ......
  • Page 320 Indicators, direction ....146, 212, 215 Labels, identification ........248 Mirror, rear view ..........87 Inflating accessories (using the kit) ....203 Lamps, warning and indicator....32-41 Mirrors, door..........Inflating tyres ..........24 Leather (care)..........233 Misfuel prevention ........108 Inputs for audio system ..128, 274, 294, 296 LED daytime running lamps....117, 214 Motorway function Instrument panel lighting ......46...
  • Page 321 Alphabetical index Paint colour code ........248 Replacing fuses ........218-224 Serial number, vehicle ........248 Paintwork, matt ...........233 Replacing the air filter ......... Service indicator ........... Parcel shelf, rear......... Replacing the oil filter ......... Servicing ............24 Parking brake ........162, 195 Replacing the passenger Setting the clock ......
  • Page 322 Tables of engines......238, 242, 244 Unlocking ............90 Tables of fuses ..........218 Unlocking from the inside ......103 Table of weights ....240, 241, 243, 245 Update risk areas ........268 Tank, fuel..........106, 108 Updating the date ....... 278, 300, 301 Technical data ......238, 242, 244 Updating the time .......
  • Page 331 This handbook describes all of the equipment For any work on your vehicle, use a qualifi ed available in the whole range. workshop that has the technical information, competence and equipment required, which a Your vehicle will be fi tted with some of this CITROËN dealer is able to provide.
  • Page 332 11DS3.0031 Anglais 2011 – DOCUMENTATION DE BORD 4Dconcept Diadeis Edipro CRÉATIVE TECHNOLOGIE...

Table of Contents

Save PDF