Premier AA-3225 Instruction Manual page 3

Remote Controller Specification
Model
R51M/(C)E, R51M/BG(C)E, RG51M2/(C)E,
RG51A/(C)E, RG51M3/(C)E.
Rated Voltage
3.0V(Alkaline dry batteries LR03 2)
Lowest Voltage of CPU
2.0V
Emitting Signal
8m (when using 3.0 voltage,
Transmission Distance
it Gets 11m)
Environment
-5 C 60 C
~ ~
Performance Features
1. Operating Mode: AUTO COOL DRY
HEAT(Cooling only model without) and FAN .
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range : 17 C~30 C.
4. Full function of LCD (Liquid Crystal Display)
5. Back light emitting(only available for R51M/BG(C)E models)
Features of the Remote controller buttons
¡£
( C)
SET TEMPERATURE
FAN
AUTO
HIGH
COOL
MED
DRY
LOW
TEMP
2
1
9
ON/OFF
MODE
FAN SPEED
8
3
TIMER ON
SWING SLEEP
10
4
11
TIMER OFF
5 RESET LOCK
12
AIR CLEAN
LED
DIRECTION AIR
DISPLAY TURBO
6 13
*
*
7 14
*
15
Fig. 1
1
TEMP Button
1
temperature setting.
TEMP Button
2
temperature setting .
MODE Selection Button: Each time the button is pressed, the
3
operation mode is shifted in the direction of the arrow:
4
SWING Button: Push this switch button to activate auto
swing feature of the horizontal louver. Push it again to stop.
RESET Button: When you press the recessed RESET button,
5
all current settings are cancelled and the control will return to
the initial settings.
6
AIR DIRECTION Button: Press this button to change the swing
angle of the louver. The swing angle of the louver is 6 for
each press. When the louver swing at a certain angle which
would affect the cooling and heating effect of the air conditioner,
it would automatically change the swing direction . No symbol
will appear in the display area when press this button. (Not
applicable to units without this function).
LED DISPLAY Button: Press this button to clear the digit
7
display in the air conditioner, press it again to activate it (Not
available for the units without LED display window).
8 FAN SPEED Button: Used to select the Fan Speed in four steps-
AUTO LOW
NOTE:
* : Indicates optional the fan speed mode is shifted.
button.
ON/OFF Button: Push this button to start operation, push the
9
M odels RG51M2/(C)E: button again to stop operation.
*
*
without 14 and 15
TIMER ON Button: Press this button to initiate the auto-on time
10
buttons.
sequence. Each press will increase the auto-timed setting in 30
Models RG51M3/(C)E:
minutes increments. When the setting time displays 10:00, each
* *
without 7 , 14 and
press will increase the auto-timed setting 60 minutes increments.
*
15 buttons.
To cancel the auto-timed program, simply adjust the auto-on time
Models R51M/(C)E to 0:00.
and R51M/BG(C)E:
SLEEP Button: Press this button to go into the Energy-Saving
11
*
without 15 button.
operation mode. Press it again to cancel. This function is only
can be used on COOL, HEAT and AUTO mode and maintain the
most comfortable temperature for you.
NOTE: While the unit is running under SLEEP operation
mode, it would be canceled if you press the other button.
: Push this button to decrease the indoor
: Push this button to increase the indoor
AUTO COOL DRY HEAT
NOTE: COOL only model has no HEAT feature.
MED or HIGH. Each time the button is pressed,
2
FAN
o