Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Erbauer ERB401SDR
Summary of Contents for Erbauer ERB401SDR
- Page 1 ERB401SDR 360W 1/2 SHEET SANDER...
- Page 2 Original Instructions (Version 1.0)
- Page 3 Congratulations on your purchase of a quality power tool from Erbauer (UK) Ltd. This product should give you reliable service but for your peace of mind this power tool does carry a 2 year guarantee, the terms of which are detailed below.
-
Page 4: General Power Tool Safety Warnings
GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your electric (corded) power tool or battery- operated (cordless) power tool. - Page 5 f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
- Page 6 5. Fully unwind cable drum extensions to avoid potential overheating. 6. When an extension cable is required you must ensure it has the correct ampere rating for your power tool and is in a safe electrical condition. 7. Ensure your mains supply voltage is same as indicated on the rating plate. 8.
- Page 7 VIBRATION The European Physical Agents (Vibration) Directive has been brought in to help reduce hand arm vibration syndrome injuries to power tool users. The directive requires power tool manufacturers and suppliers to provide indicative vibration test results to enable users to make informed decisions as to the period of time a power tool can be used safely on a daily basis and the choice of tool.
- Page 8 Avoid using tools in temperatures of 10ºC or less Plan your work schedule to spread any high vibration tool use across a number of days. Health Surveillance All employees should be part of an employer’s health surveillance scheme to help identity any vibration related diseases at an early stage, prevent disease progression and help employees stay in work.
- Page 9 SYMBOLS To reduce the risk of injury, user must read instruction manual Warning Double insulation Wear ear protection Wear eye protection Wear dust mask Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
- Page 11 ON-Off SWITCH SWITCH LOCK-ON BUTTON VARIABLE SPEED CONTROL HAND GRIP AREA BASE PLATE SANDING PAPER CLAMP CLAMP LEVER CAP CLAMP LEVER LOCK DUST BAG PAPER HOLE PUNCH 360W 1/2 SHEET SANDER 360W 1/2 SHEET SANDER...
-
Page 12: Technical Data
TECHNICAL DATA Voltage 230-240V~50Hz Power input 360W No-load speed 6,000-11,000 /min Base plate size 113 x 225 mm Orbital dia 2.4 mm Protection class Machine weight 2.8 Kg NOISE INFORMATION A weighted sound pressure: : 79.6 dB (A) =3.0 dB (A) A weighted sound power: : 90.6 dB (A) =3.0 dB (A) -
Page 13: On/Off Switch
OPERATING INSTRUCTIONS Note: Before using the tool, read the instruction book carefully. Intended Use The machine is intended for dry sanding of wood, plastic, filler and coated surfaces. 1. ON /Off SWITCH Depress to start and release to stop your tool. fig. - Page 14 Derusting 9800~11000 metal Sanding 9800~11000 metal and steel Sanding 6500~8700 plexiglass 4. HAND GRIP AREA You can operate your sander with two hands (See fig. 2 Fig. 2). 5. CHANGING STANDARD SANDING PAPER To remove the sanding paper, lift up the clamp lever and move away from the clamp lever lock (See Fig.
-
Page 15: Orbital Sanding
bracket into the location on the sander housing (See Fig. 5-3). 8. fLUSH SANDING fACILITY Your sander can sand flush on three sides of the baseplate which allows easy access to corners and edges of mouldings (See Fig. 6). 9. ORBITAL SANDING Your sander operates in small circular rotations which allow efficient material removal. - Page 16 WORKING HINTS FOR YOUR FINISHING SANDER 1. If your power tool becomes too hot, especially when used at low speed, set the speed to maximum and run it with no load for 2-3 minutes to cool the motor. Avoid prolonged usage at very low speeds.
-
Page 17: Maintenance
MAINTENANCE Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. -
Page 18: Plug Replacement
PLUG REPLACEMENT (UK & IRELAND ONLY) If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are colored in accordance with the following code: BLUE =NEUTRAL Brown = Live As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in your plug, proceed as follows. -
Page 19: Declaration Of Conformity
EN 61000-3-3 EN 60745-1 EN 60745-2-4 Authorised Signatory and technical file holder Date: 07/04/11 Signature: Name / title: Peter Harries / Quality Manager Erbauer (UK) Ltd. Trade House, Mead Avenue, BA22 8RT 360W 1/2 SHEET SANDER 360W 1/2 SHEET SANDER...
Need help?
Do you have a question about the ERB401SDR and is the answer not in the manual?
Questions and answers