Table of Contents
Advertisement
Display panel cable
Description
Display panel cable
Before removing the display panel cable, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Disconnect the battery cable from the system board (see
Remove the display panel cable:
1.
Release the ZIF connector (1) to which the display panel cable is attached, and then disconnect the
display panel cable from the system board.
2.
Release the ZIF connector (2) to which the display panel cable is attached, and then disconnect the
display panel cable from the display panel assembly.
3.
Remove the display panel cable (3).
4.
Remove the display panel cable.
Reverse this procedure to install the display panel cable.
24
Chapter 5 Removal and replacement procedures
Back cover on page
19).
Spare part number
784414-001
Battery on page
22).
Advertisement
Table of Contents
