Display Panel - HP Elite x2 1013 G3 Maintenance And Service Manual

Display panel

Display panel
Back cover for use in models without WWAN
Back cover for use in models with WWAN
Display panel, WUXGA+, privacy (includes privacy panel, touch board, IR bezel, LCD cable, and touch
control cable)
Display panel, 3k2k, models without an IR camera (includes panel, touch board, bezel, LCD cable,
and touch control cable)
Display panel, 3k2k, models with an IR camera (includes panel, touch board, IR bezel, LCD cable,
and touch control cable)
IMPORTANT:
Before removing the display panel, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
Remove the display panel:
1. Lift the kickstand (1), and then remove the four Torx T5 1.6×2.5 screws (2) securing the back cover.
Make special note of each screw size and location during removal and replacement.
Spare part number
L31357-001
L31358-001
L31364-001
L31365-001
L31886-001
Component replacement procedures 33