Access Log; Viewing Access Log - NEC EXPRESSSCOPE Engine 3 User Manual

ACCESS LOG

You can display, clear, and set the access log for the management LAN.
The user must have an account as administrator for clearing and
setting the access log.
The following are events supported by the Access Log function.
• Login and logout events for HTTP, HTTPS, and SSH connections
• System control (Power OFF/ON, system reset, etc...) via Web
browser.
• Modify the setting (Network setting, etc...) via Web browser.
• Start the remote KVM
User Information is not registered by logout events for SSH
connections.

Viewing access log

To move the current default target to /admin1/sp1/log1/record1, enter the following command
at the command prompt.
cd /admin1/sp1/log1/record1
Enter the following command, if you would like to confirm the access log.
show
The example of displaying the access log is shown below.
timestamp
----------------+-----------+-----------------------+--------------+------------------------------------------
06/10/2009
-----------------------------------------------------------------------------------------------------------------
06/10/2009 admin
-----------------------------------------------------------------------------------------------------------------
06/10/2009 user
-----------------------------------------------------------------------------------------------------------------
user ipaddress
ope 192.168.2.14
192.168.2.14
192.168.2.14
protocol
SSH Login Successful 13:52:19
SSH Login Successful 13:53:14
HTTP
- -
42
event
Login Successful 13:55:49