Login And Logout; Login; Logout - NEC EXPRESSSCOPE Engine 3 User Manual

LOGIN AND LOGOUT

Login

Enter your user name and password at login prompt. A command prompt will be displayed
after login. Also you can login by using public key authentication.
The user account is common to the one for a remote management
function via web browser.
The number of users who can log in the system using the command
line interface at the same time is three users or less. Therefore, you
cannot log in the system when other three users have been logging in
the system using SSH clients via the command line interface. Check
whether other three users are logging in the system, if you cannot log
in via the command line interface.
Only a single user among users who are using the command line
interface or ESMPRO/ServerManager can use a character-based
remote console via the command line interface. Check whether
another user is using a character-based remote console, if you
cannot use a character-based remote console.
Refer to the "CONFIGURATION" in the Chapter 5: Using Remote
Management" for registering SSH public key.

Logout

Enter the "exit" command at the command prompt. The SSH client will be disconnected from
the BMC after logout.
- -
30