EN GL IS H ANGLE GRINDER DW820 General Power Tool Safety Warnings Congratulations! WARNING! Read all safety warnings You have chosen a D WALT tool. Years of and all instructions. Failure to follow experience, thorough product development and the warnings and instructions may result...
EN GLI SH current device (RCD) protected supply. adjustments, changing accessories, or Use of an RCD reduces the risk of electric storing power tools. Such preventive safety shock. measures reduce the risk of starting the power tool accidentally. 3) PERSONAL SAFETY Store idle power tools out of the reach Stay alert, watch what you are doing and of children and do not allow persons...
EN GL IS H d) The rated speed of the accessory must be at k) Position the cord clear of the spinning least equal to the maximum speed marked accessory. If you lose control, the cord may be on the power tool. Accessories running faster cut or snagged and your hand or arm may be than their rated speed can break and fly apart.
EN GLI SH up. The operator can control torque reaction or devices, certain residual risks cannot be avoided. kickback forces, if proper precautions are taken. These are: b) Never place your hand near the rotating – Impairment of hearing. accessory. Accessory may kickback over your –...
EN GL IS H INTENDED USE ASSEMBLY AND ADJUSTMENTS Your DW820 angle grinder has been designed for WARNING: To reduce the risk professional grinding applications. of serious personal injury, turn DO NOT use grinding wheels other than centre tool off and disconnect tool from depressed wheels and flap-disc.
EN GLI SH 1. Place the tool on a table, guard up. Proper Hand Position (fi g. 1, 6) 2. Fit the backing flange (g) correctly onto the WARNING: To reduce the risk of spindle (h) (fig. 4). serious personal injury, ALWAYS use 3.
EN GL IS H accumulate inside the machine housing dampened only with water and mild when working with metal. This can soap. Never let any liquid get inside the result in the protective insulation in the tool; never immerse any part of the tool machine becoming degraded with a into a liquid.
Page 15
Arada Sub City, Kebele 01/02, Global Insurance Bldg., nawanag@ethionet.et 251-11-1563969 2nd Flr., Room 43, P.O. Box 2525, Addis Ababa Fax: 251-11-1558009 Iraq Al-Sard Co. for General Trading Ltd dewalt.service@yahoo.com Tel: 964-18184102 Jbara Bldg. 3Flr. Al Rasheed St., Baghdad, Iraq Jordan Amman West Stores-Bashiti ali@bashitistores.com Tel: 962-6-5350009 210 Garden St.