Removing And Installing Rear Brake Disc (Mounted On Rear-Wheel Hub) - BMW R 1150 GS Repair Manual

Removing and installing rear brake
disc (mounted on rear-wheel hub)
•
Remove screws securing the brake caliper.
•
Remove rear wheel.
•
Remove brake disc.
•
Installation is the reverse of the removal proce-
dure.
•
Degrease the brake disc before installing.
e
Caution:
[ABS] Check sensor gap and adjust with shims if
necessary.
Sensor gap:....................................0.45...0.55 mm
.................................................. (0.018 ... 0.022 in)
X
Tightening torque:
Brake disc to rear wheel drive
(clean thread + Loctite 243).......................... 21 Nm
34.10
v
243
GS340161