Requirements - NEC Univerge SV8100 SL1000 Installation Manual

Requirements

SV8100 MyCalls Software 2.5.0.0 SP3 / SL MyCalls 3.5.1.0 or greater.
Sense Call Recording Software version 2.6.2
Firmware version 2.4.1 (June 2010).
Sense 2.6.2 is only supported on the SV8100 / SL series PBX
Refer to the specific MyCalls installation manual for any system software version requirements.
The call recording server must be a dedicated PC for call recording. If you are recording 30 channels
or greater then MyCalls and the call recording software must be on separate PC's. Access to the call
recording server PC should be made secure by a username and password. Limiting the number of
users that have access to the PC is also considered an extra security precaution. A maximum of 120
channels can be recorded on a single call recording server. If you are recording more than 120
channels, then two call recording servers can be used.
When implementing a call recording solution, consideration should be given to backing up recorded
calls. Details on how to backup recorded call are provided later in the manual. For optimum
performance of call recording the operating system of the PC and Sense should be installed on
different drives.
Minimum Hardware Specification – MyCalls and Sense on the Same PC.*
Intel Dual Core 2.0GHz Processor
3GB RAM
Min 500GB of available Hard Disk Space
*MyCalls and Sense can only be on the same if less than 30 channels are being recorded.
Minimum Hardware Specification – Sense Only Upto 60 chanells being recorded.
Intel Dual Core 2.0GHz Processor
3GB RAM
Min 1TB of available Hard Disk Space
Minimum Hardware Specification – Sense Only Up to 120 chanells' being recorded.
Intel Quad Core Processor
8GB RAM
Min 1TB of available Hard Disk Space
Operating systems:
Windows XP Pro min SP2 – 32 BIT only
Windows Server 2003 SP2 – 32 BIT only
Windows Vista Business, Ultimate and Enterprise 32 BIT only
Windows 7 Professional, Ultimate and Enterprise 32 and 64 BIT
Windows Server 2008 R2 64 BIT
A sound card and speakers are required for call playback
Note although MyCalls is supported on Terminal Services and Hyper V, the call recording software is
not. Call playback using a MyCalls client is not supported in a thin client environment.
1GB of disk space will store approximately 100 hours of call recordings, depending on requirements it
may be necessary to increase the available disk space in the PC. Recorded calls can be archived to
free up space from the PC. There must be an available USB port for each call recorder that will be
connected to the PC. The USB ports that the call recording units connect to must be USB 2 Ports