Assembly Instructions; Tools Required; Assembly Notes; Tubes - Ambirad Vision VS Installation & Servicing Manual

2. Assembly Instructions.

PLEASE READ this section prior to
assembly to familiarise yourself with the
components and tools you require at the
various stages of assembly. Carefully open the
packaging and check the contents against the
parts and check list.
The manufacturer reserves the right to alter
specifications without prior notice.
2.1

Tools Required.

The following tools and equipment are advisable
to complete the tasks laid out in this manual.
Suitable alternative tools may be used.
Trestles
Wrench With
Extension
2.2

Assembly Notes.

Please read these assembly notes in
conjunction with the correct assembly
drawings (figs 14 to 28).

2.2.1 Tubes

Identify and position tubes on trestles. For
aesthetics it is advisable to position the tube
seam and coupling fastener so that these
cannot be seen from beneath the heater. Mark
out the position of the bracket centres from the
dimensions shown on the assembly drawings.
Leather
Faced
Gloves
13mm
Socket
Pop
Riveter
Saw
& 3/16"
Rivets
Please ensure that all packaging is
disposed of in a safe environmentally
friendly way.
For your own safety we recommend the
use of safety boots and leather faced
gloves when handling sharp or heavy items. The
use of protective
recommended.
Pozidrive
Screwdriver
Tape
Measure
Silicone
Sealant
& Gun
2.2.2 Turbulators (where fitted)
Insert turbulator(s) into tube(s) ensuring the
correct length and quantity are inserted into their
respective correctly identified tube(s) as detailed
in the assembly drawings.
2.2.3 Brackets
There can be three types of brackets supplied
with these heaters:
•
Type 'A' are suspending brackets with
reflector fixing points.
•
Type 'B' are suspending brackets with no
fixing points.
•
Type 'C' is a centre bracket to retain the
reflector. (certain models only)
Slide the bracket assemblies along to the tubes
to the marked positions in their correct order as
detailed in the assembly drawings. Tighten
clamping 'U' bolt arrangement to tubes ONLY
WHERE STATED on the assembly drawings.
25
eye wear is also
10mm,
12mm &
13mm
Spanners
4 & 5mm
Allen
Keys
Herringbone
Systems Only