Thrane&Thrane SAILOR Fleet77 TT-3084A User Manual
  1. Manuals
  2. Brands
  3. Thrane&Thrane Manuals
  4. Antenna
  5. TT-3084A Sailor Fleet77
  6. User manual
Thrane&Thrane SAILOR Fleet77 TT-3084A User Manual

Thrane&Thrane SAILOR Fleet77 TT-3084A User Manual

Hide thumbs Also See for SAILOR Fleet77 TT-3084A:
Table of Contents

Advertisement

Quick Links

Thrane & Thrane A/S
SAILOR Fleet77
TT-3084A
&
SAILOR Fleet55
TT-3086A
User Manual
Copyright © Thrane & Thrane A/S
ALL RIGHTS RESERVED

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SAILOR Fleet77 TT-3084A and is the answer not in the manual?

Questions and answers

Related Manuals for Thrane&Thrane SAILOR Fleet77 TT-3084A

Summary of Contents for Thrane&Thrane SAILOR Fleet77 TT-3084A

  • Page 1 Thrane & Thrane A/S SAILOR Fleet77 TT-3084A & SAILOR Fleet55 TT-3086A User Manual Copyright © Thrane & Thrane A/S ALL RIGHTS RESERVED...
  • Page 2 Information in this document is subject to change without notice and does not represent a commitment on the part of Thrane & Thrane A/S. It is recommended to download the latest version of the manual from the Thrane Extra net or request this from the distributor.
  • Page 3 Safety Summary The following general safety precautions must be observed during all phases of operation, service and repair of this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture and intended use of the equipment. Thrane &...
  • Page 4 DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE Do not operate the equipment in the presence of flammable gases or fumes. Operation of any electrical equipment in such an environment constitutes a definite safety hazard. KEEP AWAY FROM LIVE CIRCUITS Operating personnel must not remove equipment covers. Component replacement and internal adjustment must be made by qualified maintenance personnel.

  • Page 5: Table Of Contents

    Table of Contents Table of Contents About the Manual ............1 Introduction ............. 3 2.1 Abbreviations ............. 3 2.2 The Inmarsat Fleet Service ........5 2.3 The SAILOR Fleet77 system ......... 9 2.4 The SAILOR Fleet55 system ....... 12 2.5 Hardware Interfaces.......... 15 2.5.1 Two Cradle/Handset interfaces....
  • Page 6 Table of Contents 3.4.2 Distress call failure........43 3.4.3 Distress and Priority call to the ship....43 3.5 MPDS connection..........44 3.5.1 Call waiting ..........45 3.6 ISDN Connection ..........46 Operation..............49 4.1 Menu System ............49 4.1.1 Phonebook..........50 4.1.2 Area............52 4.1.3 LES............53 4.1.4 Mailbox ..........54 4.1.5 Help Desk ..........55 4.1.6 Alarm Log ..........56 4.1.7 Status ............57...
  • Page 7 Table of Contents 4.3.15 BarServiceOut ........76 4.3.16 LED Dimm ..........77 4.3.17 Antenna Setup........77 4.3.18 DistressTest ........... 79 4.3.19 Alarm log ..........80 4.3.20 Warning Log........... 81 4.3.21 Help Desk ..........81 4.3.22 PIN codes ..........82 4.3.23 Mailbox..........83 4.3.24 RJ11 Setup ..........
  • Page 8 Table of Contents Index ..............151 Appendix A - Menu Tree ..........153 May 2005...

  • Page 9: About The Manual

    Abbreviations About the Manual About the Manual Congratulations on purchasing your SAILOR Fleet product. Whether you have chosen a TT-3084A SAILOR Fleet77 or a TT-3086A SAILOR Fleet55, the system makes it possible for you to communicate from virtually any ocean region in the world using the Inmarsat Fleet service established by Inmarsat.

  • Page 11: Introduction

    Abbreviations Introduction Introduction Abbreviations Antenna Control Unit Above Deck Unit AORE Atlantic Ocean Region East AORW Atlantic Ocean Region West Below Deck Unit Front End Unit Global Positioning System Inmarsat Mobile Number ISDN Integrated Services Digital Network Inmarsat Serial Number Indian Ocean Region Inmarsat Service Provider Liquid Crystal Display...
  • Page 12 Introduction Abbreviations T&T Thrane & Thrane A/S TNID Terrestrial Network ID Unrestricted Digital Information Universal Serial Bus May 2005...

  • Page 13: The Inmarsat Fleet Service

    The Inmarsat Fleet Service Introduction The Inmarsat Fleet Service The Inmarsat Fleet service is based on 4 Geo-stationary 3 generation satellites situated above the equator. Geo- stationary means that the satellites are always located in the same position, i.e. they rotate at the same speed as that of the earth.
  • Page 14 Introduction The Inmarsat Fleet Service The services supported by the Inmarsat Fleet encompass: • High speed services • 2 x 64 / 2 x 56 kbit/s data • 64 kbit/s data • 56 kbit/s data • Speech • 3.1 kHz audio •...
  • Page 15 The Inmarsat Fleet Service Introduction Important notice: Before a terminal can be used on the network, it has to be commissioned by one of the Inmarsat Service Providers (ISP’s). In order to use the different Inmarsat Fleet services it is necessary to have at least one Inmarsat Mobile Number (IMN) for each of the above mentioned services.
  • Page 16 Introduction The Inmarsat Fleet Service The Speech and 3.1 kHz audio services make it possible to establish high quality analogue connections with quality equal terrestrial analogue connections digital networks/switches. The Speech service is used for high quality voice connections, whereas 3.1 kHz audio can be used to transfer analogue signals between fax machines and modems with an analogue 2-wire interface.

  • Page 17: The Sailor Fleet77 System

    The SAILOR Fleet77 system Introduction The SAILOR Fleet77 system The SAILOR Fleet77 System includes the following system components: • TT-3008C SAILOR Fleet77 Antenna (ADU) • TT-3038C SAILOR Fleet77 Electronics Unit (BDU) • TT-3622B SAILOR Fleet77 Distress Cradle • TT-3620F SAILOR Fleet Control Handset (4 wire) Accessories (manual, software, etc.) Instructions on how to assemble the system, wiring and specification, can be found in the Installation Manual.
  • Page 18 Introduction The SAILOR Fleet77 system TT-3008C Antenna The TT-3008C antenna or ADU (Above Deck Unit) is a stabilized high-gain antenna. The antenna has built-in all functions for satellite tracking including a GPS system. TT-3038C-128 SAILOR Fleet77 Electronics Unit (BDU) All connectors for external equipment are placed on the rear of the terminal (BDU).
  • Page 19 The SAILOR Fleet77 system Introduction configuration data. It contains all necessary data to recover the system after a replacement of the BDU. TT-3622B SAILOR Fleet Cradle with Distress and TT-3620F SAILOR Fleet Control Handset (4 wire) The Handset is primary used to make telephone calls. Furthermore it can be used to configure the system.

  • Page 20: The Sailor Fleet55 System

    Introduction The SAILOR Fleet55 system The SAILOR Fleet55 system The SAILOR Fleet55 System includes the following system components: • TT-3008F SAILOR Fleet55 Antenna (ADU) • TT-3038C SAILOR Fleet55 Electronics Unit (BDU) • TT-3622C SAILOR Fleet Cradle without Distress • TT-3620F SAILOR Fleet Control Handset (4 wire) Accessories (manual, software, etc.) Instructions on how to assemble the system, wiring and specification, can be found in the Installation Manual.
  • Page 21 The SAILOR Fleet55 system Introduction TT-3008F SAILOR Fleet55 Antenna The TT-3008F antenna or ADU (Above Deck Unit) is a stabilized high-gain antenna. The antenna has built-in all functions for satellite tracking including a GPS system. TT-3038C SAILOR Fleet55/77 Electronics Unit (BDU) All connectors for external equipment are placed on the rear of the terminal (BDU).
  • Page 22 Introduction The SAILOR Fleet55 system module attached. This module stores system configuration data. It contains all necessary data to recover the system after a replacement of the BDU. TT-3622C SAILOR Fleet Cradle without Distress TT-3620F SAILOR Fleet Control Handset (4 wire) The Handset is primary used to make telephone calls.

  • Page 23: Hardware Interfaces

    Hardware Interfaces Introduction Hardware Interfaces The Electronic Units of the SAILOR Fleet77 and the SAILOR Fleet55 has the following hardware interfaces: • Analogue RJ11 number 1 (X1) • Analogue RJ11 number 2 (X2) • Analogue RJ11 number 3 (X3) • Handset 1 (X4) •...

  • Page 24: Two Cradle/Handset Interfaces

    Introduction Hardware Interfaces 2.5.1 Two Cradle/Handset interfaces  Cradle / Handset The BDU has two 4 wire handset ports with RS-485 data control. Each Handset can be used to set-up the terminal and it can be used to make or receive phone calls utilizing one of the following services: •...

  • Page 25: Isdn Interface

    Hardware Interfaces Introduction • Speech • 3.1 kHz audio • mini-M voice • 9.6 kbit/s fax The type of service used on each interface is independent of each other and can be configured in the Routing menu. 2.5.3 ISDN interface ...
  • Page 26 Introduction Hardware Interfaces Please ensure when using only one B-channel that your ISDN equipment is configured to support one B-channel only. The following services may be used on the ISDN interface: • 128 kbit/s UDI (option on F77) • 64 kbit/s UDI •...

  • Page 27: Interface

    Hardware Interfaces Introduction 2.5.4 RS-232 interface  RS-232 The RS-232 interface is a standard 9-pin serial ports, with a maximum port speed of 115.2 kbit/s. The interface supports the following service types: • MPDS service • Configuration of the terminal via FleetCP software (See section 5.1) •...

  • Page 28: Discrete I/O Interface

    Introduction Hardware Interfaces Note: Interface is currently not supported. 2.5.6 Discrete I/O interface  Discrete I/O The transceiver also has a discrete I/O interface, containing 4 configurable input/output. Note: Interface is currently not supported. 2.5.7 USB Interface  USB Interface USB - Universal Serial Bus –...

  • Page 29: Ethernet Interface

    Hardware Interfaces Introduction interface only supports the 64 kbit/s UDI service at present time. 2.5.8 Ethernet Interface  Ethernet RJ45 The Ethernet interface is a RJ45 connector. It can be used for the MPDS service. Connect a computer through a switch or hub or connect directly using a crossover cable.

  • Page 30: The Handset

    Introduction The Handset The Handset The Handset is the primary interface for the SAILOR Fleet system. It enables the user to dial numbers, it displays error and status messages, and it can be used to configure the transceiver. The Handset is divided into 3 distinct and inter-working sections.

  • Page 31: Lcd/Led

    The Handset Introduction 2.6.1 LCD/LED As shown in the picture above, the top of the handset contains the LCD for displaying information to the user. It can be adjusted for contrast and is backlit for viewing in dimly lit areas or night operations. The LCD display is graphically shown below: Scroll Up Mailbox Signal Strength...
  • Page 32 Introduction The Handset The display contains a set of symbols which together with the 4 indicators situated below the display gives continuous indication of current status. There are four LED’s under the LCD display (see below). From left to right they are Power (GREEN) – Alarm (RED) – Connected (AMBER) –...
  • Page 33 The Handset Introduction Symbol Meaning  More menu entries above.  More menu entries below   Turned on when the key has been pressed.  Turned on when the keypad is in alpha mode. Alpha mode is used to enter letters (for example names in the phone book).

  • Page 34: Function Buttons

    Introduction The Handset  The handset is off hook 2.6.2 Function Buttons The Function buttons, as shown above, enables the user to enter the menu system of the transceiver and change various settings. Each button is described in detail below. Symbol Meaning ...
  • Page 35 The Handset Introduction a while and check that the LCD display counts down to zero before releasing the button.  The EXIT Button: Similar in function to the Esc-key on a PC. While in the Menu system, pressing Exit will bring the user back one level until the Menu is completely exited.
  • Page 36 Introduction The Handset Secondary function: Edit. Allows users to edit previously entered information transceiver.  Toggles between normal mode and alpha numeric mode. Secondary function: Delete. Allows users to delete previously entered information. When browsing in the menu system this button can also be used to toggle the short codes on/off.
  • Page 37 The Handset Introduction  Not used  Shortcut to the area selection submenu, see section 4.1.2 Area.  Not used.  Not used.  Not used.  Turn speaker in the cradle on/off.  Shows C/No “signal strength” in the display. ...

  • Page 38: Alpha-Numeric Buttons

    Introduction The Handset 2.6.3 Alpha-Numeric Buttons The keypad can be in normal (numeric) mode or alpha mode. Normal mode is used to enter digits (phone numbers) whereas alpha mode is used to enter letters  (names in the phone book). The is used to switch between the two modes and the display indicates if in alpha mode.
  • Page 39 The Handset Introduction  D E F 3  G H I 4  J K L 5  M N O 6  P Q R S 7  T U V 8  W X Y Z 9 ...

  • Page 40: Distress Cradle

    Introduction Distress Cradle Distress Cradle NOTE: The Distress cradle is only available with the TT-3084A SAILOR Fleet77 system. Besides being the base for the handset, the Distress cradle is also where a Distress call is initiated or ended. A speaker for hand free operation is located in the lower left side of ...
  • Page 41 Distress Cradle Introduction Priority calls. Distress Test LED: Is lit when a distress test is performed. See section 4.3.18 Distress Test. May 2005...

  • Page 43: Getting Started

    Get ready to make a call Getting started Getting started Get ready to make a call 3.1.1 How to power on the system. The system can be powered on from the BDU or from the handset. Power on from Handset: The handset power button is placed in the upper left corner of the handset.
  • Page 44 Getting started Get ready to make a call Power on from BDU: The BDU power button is placed on the back panel of the BDU. See figure below.  Power Button Press and hold the power button for a few seconds or until the green LED on the front of the terminal lights up.
  • Page 45 Get ready to make a call Getting started Below is an example of the normal readout of the handset display, while the BDU is booting. Initialising  AORE: Wait for NCS  AORE: Wait for NCS  AORE: Wait for GPS ...

  • Page 46: How To Power Down The System

    Getting started Get ready to make a call When the display reads “READY” as shown above, the system is ready to make and receive calls. 3.1.2 How to power down the system. The system can be powered off from the BDU or from the handset.

  • Page 47: Use Of Pin Codes

    Use of PIN codes. Getting started Use of PIN codes. Access to some of the terminals functionalities are restricted by a PIN code. Two different kinds of User PIN codes are used in the system: One PIN for the Super User and one for the Service User.

  • Page 48: Normal Calls

    Getting started Normal calls referred to the “TT-3084A SAILOR Fleet77, TT-3086A SAILOR Fleet55, Installation Manual”. STU PIN and 128K PIN Pin codes must be retrieved from your distributor in order to enable the STU functionality (Secure Telephone Unit) or the 128 kbit/s service. Please refer to section 4.3.26 and 5.1.2 to see how to enable the service.

  • Page 49: Calling The Terminal

    Normal calls Getting started  You hang up by pressing . During and after a call, the display will show how long the call lasted. Example:  Connected: 00:01:59 The Phone Book can also be used to initiate a call, either by selecting an entry in the phone book or by using the short code.

  • Page 50: Distress Call

    Getting started Distress call Distress call Please note: The distress functionality is available on Fleet77 systems only. A distress call is an automated way of calling for help (SOS). A distress call from the Fleet77 system is a voice call, which means that the call will be connected to an operator at the RCC (Rescue Co-ordination Center).

  • Page 51: Distress Call Failure

    Distress call Getting started Default LES is also not configured, the NCS redirects the call to an appropriate LES. Note: If a Distress LES is not defined for each Ocean Region, an alarm will appear and the entry ‘Distress LES is not selected in all Ocean Regions’ will be added to the alarm log.

  • Page 52: Mpds Connection

    Getting started MPDS connection Any calls with lower priority including MPDS sessions will be pre-empted and a busy tone will be heard. The distress and priority call is answered by picking up a  handset or by pressing after which the ‘Priority Call’ LED will light steadily and the buzzer stops beeping.

  • Page 53: Call Waiting

    MPDS connection Getting started Paragraph 5.2.1 and 5.3 contains a description of how to setup an MPDS connection using your PC. 3.5.1 Call waiting As indicated in the previous section the user can enable the Call Waiting Notification in order to receive incoming voice calls during an MPDS session.

  • Page 54: Isdn Connection

    Getting started ISDN Connection on another interface than the interface that was used to accept the call – e.g. a fax will normally only be routed to a specific RJ11 connector and not the 4-wire handset. 3. The user may also choose to do nothing. After a certain time the notification stops and the pre-emption of the MPDS connection is implicitly rejected, if no other lines have accepted the notification.
  • Page 55 ISDN Connection Getting started The terminal does not support dynamic switching between one and two B-channels. The user needs to decide whether to use one or two channels before establishing the call. The Fleet77 128kbit/s service does not support mixed fixed and mobile originated calls, mixed UDI and voice calls or the ability to lay down one of the B channels dynamically.

  • Page 57: Operation

    Menu System Operation Operation Menu System This section describes the functions in the menu system, available to all users. The menu points handling Distress/Priority call options are only present on Fleet77 systems.  The menu is accessed by pressing . Scrolling through ...

  • Page 58: Phonebook

    Operation Menu System 4.1.1 Phonebook 01 TT 01 539558800 Phonebook 02 TT2 02 5395588xx Area Mailbox Hint Helpdesk  Press to view the Alarm log last nine digits of the Status phonenumber Super User Service User The terminal PhoneBook contains 99 entries. Each entry contains the following information: •...
  • Page 59 Menu System Operation   Press to dial.  Pressing when the wanted number is displayed, will  invoke the priority menu. Use the keys to select   call priority (only on Fleet77). Press to initiate the call. For more information on how to make priority calls, see section 4.2.5 Priority calls.

  • Page 60: Area

    Operation Menu System 4.1.2 Area Phonebook None Area *Automatic W-Atlantic Mailbox E-Atlantic Helpdesk Indian Alarm log Pacific Status Spare1 Super User Spare2 Service User Spare3 Spare4 The Area menu is used to select ocean region and has got the following list of possible choices: •...

  • Page 61: Les

    Menu System Operation 4.1.3 LES Phonebook Area 001: Comsat 002: BT Mailbox Helpdesk 003: KDD Alarm log 004: Telenor Status 005: OTE 006: Super User 007: Service User 008: FRAC 009: ST12 The LES list contains a list of those LES operators, which may be selected as gateway to the terrestrial network.

  • Page 62: Mailbox

    Operation Menu System 4.1.4 Mailbox Phonebook Area Mailbox List Empty Helpdesk Alarm log Status Super User Service User The Mailbox feature is not supported by all LES operators. The feature handles messages sent from the LES operator. If a call is made to a terminal, which is busy, switched off, etc.

  • Page 63: Help Desk

    Menu System Operation 4.1.5 Help Desk Phonebook Area Mailbox   Press to access H.Desk empty Helpdesk the menu directly. Alarm log Status Super User Service User The Help Desk is a secondary phone book that can be used for storing up to 10 support phone numbers (e.g. Thrane &...

  • Page 64: Alarm Log

    Operation Menu System 4.1.6 Alarm Log Phonebook Area Mailbox Helpdesk View alarms *FEU Alarm log Clear alarms *POSITION Status Super User Service User The Alarm Log, logs all the alarms in the system (cf. 6.1 List of Error messages). From this menu, the alarm can be viewed only.

  • Page 65: Status

    Menu System Operation 4.1.7 Status Phonebook Area Mailbox Helpdesk Alarm log Status C/NO Super User Transceiver Service User RF Block Bulletin Antenna GPS Info The Status menu has got the following sub menus: • C/No • Transceiver • RF block •...
  • Page 66 Operation Menu System Freq. offset: Frequency offset between 0-1500 Hz. Acc. offset: Acc offset between 0-1500 Hz. AGC: AGC between 0-1024. Gain: Gain between 0-256. TX level: TX level equals LOW or OK. Lo1-Lo3: Lox In or Out of lock. Temperature: Temperature in deg.

  • Page 67: Call Functions

    Menu System Operation Control Version: Loader ver.: FPGA ver.: SU ver.: RX2 ver.: Loader CRC: Control CRC: FPGA CRC: Config CRC: PositionInfo: Not ready or Latitude and Longitude. Heading: Not ready, heading 0-360 degrees or Heading N/A Low speed (If speed is equal to or below 1 knot).

  • Page 68: Call From Handset Connected To Rj11

    Operation Call functions priority calls, see section 4.2.5 Priority Calls. Short code 0  contains last dialed number, thus   followed by will redial the last number. 4.2.2 Call from handset connected to RJ11 Making a call from a (normal 2-wire PSTN) phone connected to one of the three analogue RJ11 interfaces is done in the same way as a call from the handset.

  • Page 69: Fax Call

    Menu System Operation Calling Thrane & Thrane in Denmark (country code 45) is done by pressing the following keys on the phone:  The display on the terminal handset will show how the call proceeds. After hanging up (on the ISDN phone) the display will show how long the call lasted.

  • Page 70: Priority Calls

    Operation Call functions 4.2.5 Priority calls Please note: The Priority Call functionality is available on Fleet77 systems only. A priority level can be selected when making a call. The priority levels is listed in the table below, where Routine- personal is lowest priority and Distress is highest. Call Type Priority level Routine-personal...

  • Page 71: Internal Calls

    Menu System Operation A Distress call can only be made by pressing the Distress button on the Distress Cradle. See section 3.4.1 How to make a Distress call. 4.2.6 Internal calls It is possible to make internal calls between any RJ11 (2 wire) interface.

  • Page 72: Super User Functions

    Operation Super User functions Super User functions This section contains a description of the items in the  Super User Menu. Please remember that the button can be used to toggle short codes on and off. 4.3.1 Call Logs  ------------- Start time Logged Calls...
  • Page 73 Menu System Operation • Start time of call. • Destination phone number. • Duration of call • Originating ID. (Description of service used). • Ocean region used. • LES access code. • Terrestrial network identity (always 0). • Call priority. •...

  • Page 74: Routing

    Operation Super User functions 4.3.2 Routing  Handset #1 Call Logs MiniM voice RJ11 #1 Routing {IMN}# RJ11 #2 Data Setup --------------- RJ11 #3 Speech  ISDN {IMN} RS232 #1 --------------- 3.1KHz audio Ethernet *{IMN} --------------- The Routing menu is used to associate the services with one or more interfaces.
  • Page 75 Menu System Operation numbers. (or for creating the first IMN in case the list is empty). When entering one of the above submenus it is possible to scroll through a list of all relevant IMN-numbers for the interface. In the handset menu, you will see all IMN’s associated with voice: mini-M voice, Speech, 3.1 kHz audio.

  • Page 76: Data Setup

    Operation Super User functions Service Interface Handset RJ11 RS-232 / ISDN Ethernet (1, 2 & 3) Mini-M voice 9600 fax Speech 3.1 kHz audio 64 Kbit/s 56 Kbit/s MPDS 2x64 Kbit/s 2x56 Kbit/s * Please note that MPDS can only be associated with RS-232 and Ethernet –...

  • Page 77: Contrast

    Menu System Operation +++mode: Disabled | Enabled Result codes: Disabled | Enabled 4.3.4 Contrast   Press to Adjust Call logs Routing Data setup Contrast Contrast 4.==== The display contrast of the two handset can be adjusted. To change the contrast level, select the Contrast menu ...

  • Page 78: Ring Setup

    Operation Super User functions 4.3.5 Ring setup  Ring Volume Ring Volume Ring Setup Ring Cadence 4.==== Key Beep Set UTC Time Set UTC Date  Press to Adjust Ring setup gives the possibility to change the ringing tone and the handset volume. Adjustable values are: Ring Volume: Off|1|2|3|4, default is 4.

  • Page 79: Set Utc Time

    Menu System Operation 4.3.7 Set UTC Time    Ring Setup Ring Setup Ring Setup Key Beep Key Beep Key Beep Edit time Edit time Set UTC Time Set UTC Time Set UTC Time 17:29 17:29 Set UTC Date Set UTC Date Set UTC Date Language...

  • Page 80: Disclose Pos

    Operation Super User functions 4.3.9 Disclose Pos.  *Reveal Pos Disclose Pos Dont Reveal NMEA Allowed Dial Ph.BookDial  Press to Scroll Auto Prefix  Press to select It is possible to disable the automatic reporting of position, from the GPS system. This menu gives the option to change this.

  • Page 81: Allowed Dial

    Menu System Operation 4.3.11 Allowed Dial  Press to insert mask  Press to delete mask  Disclose Pos NMEA List empty Allowed Dial Ph.BookDial Auto Prefix Allowed Dial is a function that allows the Super User to specify a phone number mask, to restrict outgoing calls. A phone number matches a dial mask, if the number contains at least as many digits as the mask and when the digits in the mask matches the corresponding digits in the...

  • Page 82: Ph.book Dial

    Operation Super User functions The phone number you enter in the dialer for making an MPDS connection, is a dummy number that is not used. Therefore the “Allowed Dial” list has no effect on MPDS connecting. 4.3.12 Ph.Book Dial  Press to Scroll ...

  • Page 83: Auto Prefix

    Menu System Operation 4.3.13 Auto Prefix   Press to insert prefix Disclose Pos  Press to delete prefix Allowed Dial .BookDial Prefix no. Auto Prefix 0045 A prefix, e.g. 0045 for Denmark, can automatically be added to any dialed number. The prefix is not added to numbers dialed from the phonebook.

  • Page 84: Barserviceout

    Operation Super User functions   with . Please note the 2x56 and 2x64 kbit/s services are only visible if the 128 kbit/s is enabled. 4.3.15 BarServiceOut  MiniM voice BarServicIn *Barred Speech BarServicOut Not barred 3.1KHz audio PhoneBook 64 Kbit/s LED Dimm 56 Kbit/s Billing Tone...

  • Page 85: Led Dimm

    Menu System Operation 4.3.16 LED Dimm  Press to Scroll   Press to select BarServicIn BarServicOut LED Dimm *Bright Ant. Setup Dimm DistressTest  The brightness of the 4 LED's on the two handset can be adjusted. To change the brightness level, select the LED ...
  • Page 86 Operation Super User functions Set time out: This function sets the number of seconds, the system waits without a satellite signal before it assumes the tracking is lost. Valid range is 1 to 300 seconds. Default is 130 seconds. Changes must be ...

  • Page 87: Distresstest

    Menu System Operation 4.3.18 DistressTest Please note: Distress Test functionality available on Fleet77 systems only.  Press to Scroll  Press to select  Ant.Setup Distress Test Enable Alarm Log Disable Warning Log Help Desk  A Distress Test is made to test the Distress call system. When the RCC receives the call, a flag in the message will has been set, so that the RCC can identify the call as a test call.

  • Page 88: Alarm Log

    Operation Super User functions is not selected within 15 seconds, the pre-configured LES will be selected instead. • The handset display will now go from ‘Distress calling’ to ‘Distress connected’ as the call progresses. ‘Distress connected’ also means that the test was a success. ...

  • Page 89: Warning Log

    Menu System Operation You may get an audio alarm when an alarm is added to the alarm log. This may be turned on and off by entering the Audio Alarm menu. 4.3.20 Warning Log  LED Dimm Ant. Setup Distress Test View log Alarm Log Warning Log...

  • Page 90: Pin Codes

    Operation Super User functions 4.3.22 PIN codes  Ant.Setup Distress Test Alarm Log Warning Log Type New PIN SU-PIN Chg Help Desk  The PIN codes menu is where the Super User PIN is changed. For a description of the pin codes, see section 3.2 Use of PIN codes.

  • Page 91: Mailbox

    Menu System Operation 4.3.23 Mailbox  Press to view message  Press to delete a message Mail Box List Empty RJ11 Setup LES Config Add Features Data Limits  The Mailbox feature handles messages being sent from the LES operator. If a call is made to a terminal, which is busy, switched off, etc.

  • Page 92: Rj11 Setup

    Operation Super User functions The following operations are possible: • View entries • Delete entries.  To View a entry, select the message and press . To  delete a entry, select the message and press 4.3.24 RJ11 Setup  Press to Scroll ...

  • Page 93: Les Configuration

    Menu System Operation  a RJ11 connector then select PABX mode . Use with   to toggle the values and to select. Press  to leave the sub menus. 4.3.25 LES Configuration  Mail Box RJ11 Setup Default LES *W-Atlantic LES Config 001: Comsat...
  • Page 94 Operation Super User functions logged on. If there's no LES list selected under Allowed or Preferred LES, the Default LES list will contain the LES list from the satellite bulletin board, meaning all available LES   in the selected Ocean region. Use to select a Ocean region and then a LES.

  • Page 95: Additional Features

    Menu System Operation   Priority Call. Use to select a Ocean region and then a LES. Note: If a Distress LES is not defined for each Ocean Region, an alarm will appear and the entry ‘Distress LES is not selected in all Ocean Regions’ will be added to the alarm log.

  • Page 96: Data Limits

    Operation Super User functions 4.3.27 Data Limits  Limit OFF RJ11 Setup 000000 Kb LES Config Add. Features MPDS Data Limits Limit OFF ISDN 00:00 hh:mm  The Data Limits menu enables the user to enter an upper limit for the use of each high speed connection. This feature is an effective way of preventing that a user by mistake forgets to close a connection.

  • Page 97: Call Waiting Notification

    Menu System Operation  duration in hours and minutes and press to save. Press  to leave the sub menu. 4.3.28 Call Waiting Notification Disabled  Support Enabled Add.Features Dial Spec. Data Limits Yes / No Limit Calls Call Waiting Notification --------------- Ring Tone 1-8...
  • Page 98 Operation Super User functions Support setting using the AT shell command . Choose the  settings by pressing and press  leave the menu. The second menu item is Limit Calls . The user may not want all calls to interrupt the MPDS sessions. It is possible to enter up to five phone numbers that are allowed to interrupt the MPDS sessions while all others will be rejected.
  • Page 99 Menu System Operation either Yes or No for each of the three RJ11 2-wire connectors. The item Ring Tone can be used for choosing a common 2-wire ring tone among eight ring tones. The ring tones are described with the two symbols ‘#’ (sound) ...

  • Page 101: Pc Programs

    System Set-up using FleetCP PC programs PC programs System Set-up using FleetCP System set-up can be managed from a PC program called FleetCP , instead of from the handset. FleetCP can be installed from the enclosed CD-ROM. The following pages contain a short introduction to FleetCP .

  • Page 102: The Map

    PC programs System Set-up using FleetCP The functions can be selected by clicking in the left menu window. The menu window is divided into the following groups: Phonebook, Help Desk, Phone Setup, Antenna Setup, General Status, Alarm Status, Call Log, Antenna Alignment, Debug Utilities and Terminal Window.

  • Page 103: Pin Codes

    System Set-up using FleetCP PC programs 5.1.2 Pin Codes The status of the PIN codes can be seen on the right side of the status bar. If no PIN codes are entered, all locks will be red and locked. Click the appropriate button to enter or change a PIN code.

  • Page 104: Phonebook

    PC programs System Set-up using FleetCP 5.1.3 Phonebook Phonebook entries is made by selecting Phonebook and right clicking in the phonebook area. Entries here can be modified or deleted in the same way. See picture below. Further information can be found 4.1.1 Phonebook. Inserting, editing and deleting entries in the Helpdesk works in a similar way.

  • Page 105: Satellite Setup

    System Set-up using FleetCP PC programs 5.1.4 Satellite Setup Satellite Setup offers an easy way of setting up Allowed, Preferred and default LES. LES operators are dragged and dropped between the three tables. Setup is made for each ocean region. See picture below. Read more about LES configuration in section 4.3.25 LES Config.

  • Page 106: Routing

    PC programs System Set-up using FleetCP 5.1.5 Routing To route calls, use the table in the Routing window. Click in the cell that correspond to service/interface that is to be changed. Click the * or # button in lower part of the screen to define it as a incoming or outgoing call.

  • Page 107: Setting Up Time And Date

    System Set-up using FleetCP PC programs 5.1.6 Setting up Time and Date To correct the time/date or in the future, the language, use the MMI setup window. Click the Use PC time button to import the time and date from the PC clock. If the clock is set to a non-UTC time a clock error message will appear on the 4-W handset on the transceiver after a while.

  • Page 108: Barring Services

    PC programs System Set-up using FleetCP 5.1.7 Barring Services In the security window call restrictions can be enabled or disabled and an Auto prefix inserted. See section 4.3.11 Allowed Dial, 4.3.14 BarServiceIn and 4.3.15 BarServiceOut for more details. May 2005...

  • Page 109: Settings

    System Set-up using FleetCP PC programs 5.1.8 Settings In the Cradle/Handset window it is possible to setup ring type, ring volume, LED brightness and display contrast. RS-232 parameters of the terminal can be changed in the RS-232 window. May 2005...

  • Page 110: Antenna

    PC programs System Set-up using FleetCP 5.1.9 Antenna The antenna setup gives a possibility to change Long term failure timeout, number of allowed sky scans and the antennas mount position relative to the ships bow. See section 4.3.17 Antenna Setup for details. The antenna can be rebooted by clicking the Reset ACU button.

  • Page 111: Set-Up Of Data Equipment

    Set-up of data equipment PC programs Set-up of data equipment 5.2.1 Set-up for MPDS over RS-232 The illustrations below shows typical hardware setup for a MPDS and ISDN data connection. MPDS Hardware Connection. For a MPDS session, connect a RS-232 cable between the COM port of the computer and the COM ports on the Fleet system.
  • Page 112 PC programs Set-up of data equipment This setup procedure is intended for PC’s running a MS- Windows operating system. The PC communicates with the transceiver as if it were a modem. Connect the transceiver to a COM port via a standard RS-232 cable.
  • Page 113 Set-up of data equipment PC programs Step 1: Install a standard modem • From the Control Panel select Modems and add a Standard modem. Do not let Windows detect the modem, but manually choose a standard 28800 bps Modem. • Select the appropriate COM port (i.e.
  • Page 114 PC programs Set-up of data equipment Important: • Enter Advanced settings and type the initialization command AT+WS45=4 in the Extra settings field. This string is transferred to the terminal when setting up a connection. If the MPDS connection is to use another LES than the one already selected, you use the initialization command = AT+WS45=4;+WLES=XXX, where XXX is the LES number.
  • Page 115 Set-up of data equipment PC programs • Give the connection a recognizable name e.g. MPDS connection Include TCP/IP as allowed network protocol and use default TCP/IP settings (Server assigned IP address, Server assigned name server addresses etc.) May 2005...
  • Page 116 PC programs Set-up of data equipment An MPDS connection can be started automatically by an application like Internet Explorer or Outlook Express. The connection can also be established manually. In Windows, open Dial-Up networking and double click the appropriate icon. Enter username and password if necessary. Click ‘Connect’.

  • Page 117: Set-Up For Isdn

    Set-up of data equipment PC programs 5.2.2 Set-up for ISDN ISDN Hardware Connection. The ISDN connection is made by connecting an ISDN modem to the computer via a RS-232 cable. The modem is connected to the Fleet system via an ISDN cable. The appropriate modem driver must be installed on the computer.
  • Page 118 PC programs Set-up of data equipment Connect an ISDN modem to the ISDN interface. Connect the modem to a PC via a standard RS-232 cable or a USB cable if the modem supports this interface. Follow the modem manufacturers installation instructions for the appropriate operating system.
  • Page 119 Set-up of data equipment PC programs Step 2: Create a Dial-up connection Open Dial-up Networking from My computer. Click “Make new connection” • Select the Lasat modem defined during step 1 as the dial up device May 2005...
  • Page 120 PC programs Set-up of data equipment • Enter the telephone number to the Internet Service Provider. Remember country code and area code if necessary. • Give the connection a recognizable name e.g. ISDN connection Include TCP/IP as allowed network protocol and use TCP/IP settings (Server assigned IP address, Server assigned name server addresses etc.) as recommended by the ISP.
  • Page 121 Set-up of data equipment PC programs After this a connection can be started automatically by an application like Internet Explorer or Outlook Express. The connection can also be established manually. In Windows, open Dial-Up networking and double click the appropriate icon.

  • Page 122: Set-Up For 64 Kbit/S Udi Using Usb

    PC programs Set-up of data equipment 5.2.3 Set-up for 64 kbit/s UDI using USB The USB interface can be used for the 64 kbit/s UDI service from a connected PC with a Fleet55/77 driver properly installed. This setup procedure is intended for PC’s running a MS-Windows operating system and the screen shots are from a Windows 2000 installation.
  • Page 123 Set-up of data equipment PC programs Step 1: Install the USB Driver Then connect the Fleet transceiver to you PC using a standard USB cable. A ‘Found New Hardware’ window will appear shortly after. After a moment the Welcome to the ‘Found New Hardware Wizard’...
  • Page 124 PC programs Set-up of data equipment Click ‘Next’ and the ‘Hardware Type’ window appears. Choose ‘Modems’ and click ‘Next’. May 2005...
  • Page 125 Set-up of data equipment PC programs The ‘Install New Modem’ window appears. Click ‘Have Disk..’ Click ‘Browse’ and choose the directory where you placed the drivers. Then press ‘OK’. May 2005...
  • Page 126 PC programs Set-up of data equipment When the next screen appears press ‘Next’ Press ‘Next’. May 2005...
  • Page 127 Set-up of data equipment PC programs Press ‘Yes’. 10. Press ‘Finish’ to complete the driver installation. May 2005...
  • Page 128 PC programs Set-up of data equipment 11. Now open the Control Panel and double click on ‘Phone and Modem Options’. 12. Select the ‘Modem’ fan and choose ‘Properties’ May 2005...
  • Page 129 Set-up of data equipment PC programs 13. Select the ‘Advanced’ fan and enter the initialization string ‘AT+WS45=6’ and press ‘OK’. Step 2: Create a Dial-up connection Make a new connection by selecting Start ->Settings - >Network and Dial-up Connections ->Make New Connection.
  • Page 130 PC programs Set-up of data equipment Click ‘Next’. Select ‘Dial-up to private network’ and click ‘Next’. May 2005...
  • Page 131 Set-up of data equipment PC programs Select ‘Thrane & Thrane Fleet USB’ and press Next. Enter the destination phone number (i.e. Internet Service Provider) and press ‘next’. May 2005...
  • Page 132 PC programs Set-up of data equipment Choose connection availability and press ‘Next’. Enter a name for the dial-up connection and press ‘Finish’. The system will now connect using USB. May 2005...

  • Page 133: Set-Up Using Ethernet/Pppoe

    Set-up using Ethernet/PPPoE PC programs Set-up using Ethernet/PPPoE This chapter describes the set-up and operation of data connections via Ethernet and PPPoE using various PPPoE clients. 5.3.1 Windows XP with Built-in PPPoE Client Prerequisites The PC must have an Ethernet adapter and Windows XP installed and both must be operational.
  • Page 134 PC programs Set-up using Ethernet/PPPoE Setting up the Connection 1. From the “Start” menu select “Settings” then “Network Connections” and then “Create New Connection”. This brings up the “New Connection Wizard”. 2. Click “Next”. 3. Select “Connect to the Internet” and click “Next”. 4.

  • Page 135: Windows 2000 Winpoet Pppoe Client

    Set-up using Ethernet/PPPoE PC programs 5.3.2 Windows 2000 WinPoET PPPoE Client The data connection via Ethernet and PPPoE can be established using various PPPoE clients. The PPPoE client WinPoet can be obtained through your local Thrane & Thrane distributor and works for both Macintosh and PC.
  • Page 136 PC programs Set-up using Ethernet/PPPoE 3. Choose the installation directory and click ‘Next’ to install. The program will now be installed. 4. When done click ‘Finish’ to restart the computer May 2005...
  • Page 137 Set-up using Ethernet/PPPoE PC programs 5. Find the shortcut on the desktop called ‘WinPoET Broadband Connection Manager’ and double click. 6. Enter random user name and password and then click ‘START’. The status field tells you how far you have reached in the connection process.

  • Page 139: Troubleshooting

    List of Error messages Troubleshooting Troubleshooting List of Error messages 6.1.1 Inmarsat defined alarms This section describes possible Cause Codes that may be displayed in the handset of the SAILOR Fleet77 or SAILOR Fleet55. Please note that all Cause Codes are also described in the Inmarsat SDM (System Definition Manual).
  • Page 140 Troubleshooting List of Error messages Cause Code Description Event 1001 Normal MES is clearing the call as instructed by the relevant MES terminal equipment (i.e., normal clearing due to MES terminal "on-hook" etc.) 1011 Called party is MES is rejecting the call because the busy.
  • Page 141 List of Error messages Troubleshooting addressed to that number 1092 Destination MES is clearing the fixed-originated call out of order because subsequent to the acceptance of the call and the signaling of the identity of the mobile terminal to which the call will actually be routed, that terminal has become out-of-service and hence cannot be rung...
  • Page 142 Troubleshooting List of Error messages for calls to the country indicated in the "service address" information received from the MES 11D1 Inconsistency LES is rejecting the call because the in designated "Service Nature" and/or "Service Type" outgoing and/or "Channel parameter" information access received from the MES is invalid (e.g., not information...
  • Page 143 List of Error messages Troubleshooting information in the Fixed/MES-Originated (PID) and and subscriber PID/MES Registration Tables at the LES as class. it relates to this call. 11E0 LES is clearing the call because the credit card PIN received from the MES is not considered (at this LES) to be valid.
  • Page 144 Troubleshooting List of Error messages allowed time limit 12C3 No User MES is clearing the call because a "LES responded Connect" message (type 8CH) has not been received by the MES within the allowed time limit 12C4 Protocol error. MES is clearing the call because the Unspecified "authentication query"...
  • Page 145 List of Error messages Troubleshooting a carrier. MES is clearing the call in mobile- originated call setup, because LES connect 12CA Protocol error, messages have not been received from unspecified. the LES following a request (through Channel Alert messages) to establish a subsequent 56/64 kbit/s call multiplexed onto a single carrier.
  • Page 146 Troubleshooting List of Error messages 1451 LES is rejecting the call because an circuit/channel appropriate terrestrial circuit is not available. currently available at this specific LES 1452 LES is rejecting the call because an circuit/channel appropriate channel unit and associated available.
  • Page 147 List of Error messages Troubleshooting supported by this specific LES 15A1 Bearer LES is rejecting the call because the capability not specified MES is not authorized for any authorized service at this specific LES 15A2 Bearer LES is rejecting the call because the capability not specified MES is not authorized to use authorized...
  • Page 148 Troubleshooting List of Error messages within the allowed time limit 15C2 Protocol error. LES is clearing the call because the Unspecified "service address" information has not been received by the LES within the allowed time limit 15C3 Protocol error, LES is clearing the call because a unspecified "Scrambling Vector"...
  • Page 149 List of Error messages Troubleshooting 15CA LES is clearing the call because a "notification acknowledge" message (type BAH) has not been received by the LES within the allowed time limit 15CB LES is clearing the call because the request sequence number contained in the received "notification acknowledge"...
  • Page 150 Troubleshooting List of Error messages available. available at this specific LES 1661 Recovery on LES is clearing the call because of an timer expiry interruption in reception of the MES carrier exceeding the allowed time limit 16C1 Reserved 16C2 Recovery on LES is clearing the call because an timer expiry appropriate SCPC MES carrier has not...
  • Page 151 List of Error messages Troubleshooting preemption 1851 NCS is rejecting the call because an circuit/channel appropriate SCPC channel is not currently available. available 1855 Call rejected, preemption failed, no channel available 1856 Call rejected, spot beam selection failed 18A1 Bearer NCS is rejecting the call because the capability not specified MES ID was not found in the...
  • Page 152 Troubleshooting List of Error messages relevant terrestrial circuit (i.e., normal clearing) 1F11 Called Party is LES is clearing the call because the busy terrestrial called party is engaged (busy) 1F21 No User LES is clearing the call because responded appropriate "off-hook" signalling from the terrestrial called party has not been received by the LES within the allowed time limit...

  • Page 153: Non Inmarsat Alarms

    List of Error messages Troubleshooting 6.1.2 Non Inmarsat Alarms Alarm Type Alarm Message CPU Alarms Tx-Level Not Ok. 1. LO Lock Not Ok. 2. LO Lock Not Ok. 3. LO Lock Not Ok. Vtune Alarm. Unanswered distress call received. Unanswered urgency priority call received. Distress LES not selected in all ocean regions.
  • Page 154 Troubleshooting List of Error messages NAR Corrupt NSR Corrupt SVR Corrupt May 2005...
  • Page 155 List of Error messages Troubleshooting Antenna Alarms Antenna(FEU), Wrong Type, Check Conf. Antenna(FEU) Link Down, Check Cable FEU Reset, Powered Down FEU Reset, Sleep Mode FEU Error, To Follow FEU Status, heat alarm FEU Status, burst alarm FEU Status, power alarm FEU Status, reset FEU Version Mismatch, Try Upload ACU Comm, Failure...
  • Page 156 Troubleshooting List of Error messages Memory Error, Cont SW CRC Memory Error, ACU Cnf Data Memory Error, ACU Cal CRC Memory Error, FLASH mem Memory Error, ACU SRAM Memory Error, ACU EEPROM Memory Error, FPGA Init Memory Error, FPGA SW CRC Motor Error, Azm Drive Motor Error, Elv Drive Motor Error, Azm Winding...
  • Page 157 List of Error messages Troubleshooting Pos feedback, Azm Zero Ref SU Error, Cal Data CRC SU Error, Initialize SU Error, Comm SU Error, protocol SU Error, Sys Info CRC Sensor Err, Roll Incl Sensor Err, Pitch Incl Sensor Err, Roll Rate Sensor Err, Pitch Rate Sensor Err, Yaw Rate Ctrl Logic, ACU Matrix...
  • Page 158 List of Error messages RX2 Error1, Temperature RX2 Error1, No Signal RX2 Error1, Channel Out Of Range RX2 Error1, Param Out Of Range RX2 Error1, AutoTune RX2 Error2, RX2 RSSI lo RX2 Error2, RX2 RSSI hi UNKNOWN ERR pos: Handset Alarms Handset COM Error This error means that the communication between handset and BDU has stopped for some reason.
  • Page 159 List of Error messages Index Index 128 kbit/s ..17, 46, 67, 87 Dial-Up networking ..106, 108, functions ....28 3.1 kHz audio ....6, 67 Discrete I/O....15, 20 Display symbols ....25 56 kbit/s ..... 6, 67 64 kbit/s ....6, 44, 67 Distress button ..
  • Page 160 Index LES ....5, 53, 85, 97 Routing ..... 66, 98 Mailbox ..... 54, 83 RS-232..15, 19, 66, 68, 101, Mask ......73 Menu......49 Safety ......62 Microwave......iii Satellite......5 Mini-M voice ...... 6 Secure Telephone Unit ..87 Mounting position..
  • Page 161 Appendix A - Menu Tree Appendix A - Menu Tree Map Legend Menu/Submen Scroll through Phonebook Main Menu phone book Selection None Area *Automatic W-Atlantic Value E-Atlantic Pacific Indian Spare 1 Not present in Fleet55 Spare 2 Spare 3 Spare 4 Avaible LES in the region Mailbox...
  • Page 162 Appendix A - Menu Tree Status C/No = xx.x dBHz Transceiver Release date: Unit Type: Serial No.: ISN: PCB No: Forward ID: SW Ver.: RF Block Rx Frequency: Tx Frequency: Freq. offset: Acc. offset: AGC: Gain: Tx level: Lo1: Lo2: Lo3: Temperature: Power Mode:...
  • Page 163 Appendix A - Menu Tree Super User PIN Super User Call logs Logged Calls Total Time Total MPDS Clear Log Mini-M Voice Speech In (*) Routing Handset#1 3.1 kHz Audio Out (#) RJ11 #1 64 kbit/s RJ11 #2 56 kbit/s RJ11 #3 9600 Fax (F77) ISDN...
  • Page 164 Appendix A - Menu Tree Key Beep 2.== 3.=== 4.==== Set UTC time Edit time Edit date Set UTC date Reveal Pos Disclose Pos Don't reveal Not in this NMEA Release Setup allowed Allowed Dial dial Enable Ph.Book Dial Disable Auto Prefix Prefix no.
  • Page 165 Appendix A - Menu Tree Bright LED Dimm Dimm Reset ACU Ant.Setup Set Time-Out Num. SkyScan Mount Position Upload FEU Enable Distress Test Disable Alarm log View log Clear log Audio Alarm Warning log View log Clear log Scroll through Help Desk Edit numbers Help desk...
  • Page 166 Appendix A - Menu Tree W-Atlantic Comsat Default LES LES Config E-Atlantic PreferredLES Pacific TeleNor Reset LES Indian etc. Distress LES Spare 1 Spare 2 Spare 3 Spare 4 STU PIN STU Setup Add. Features Disabled 128K PIN 128K Service 128K Setup Disabled Limit ON/OFF...
  • Page 167 Appendix A - Menu Tree Service User PIN Default LES W-Atlantic USTELEN Service User LES Config E-Atlantic PreferredLES STRATOS Pacific Allowed LES KDDI Reset LES Indian TELENOR. Spare 1 Distress LES Spare 2 Spare 3 Spare 4 Scroll through Help Desk Help desk Edit numbers phone numbers...

Table of Contents