Vlan Configuration Examples - Zultys ZIP 33i Technical Manual

When LLDP is enabled, the phone broadcasts an LLDP request on power up and then at
the defined Packet Interval. The default period is '120 seconds.'
4.6.4

VLAN Configuration Examples

The following examples relate to manually defining the VLAN settings via the Device
Profile.
 Tagged Voice VLAN, Untagged Data VLAN - For many deployments that use
VLAN tagging, packets related to the voice VLAN will be tagged and those related
to the data VLAN will be untagged and treated as part of the native VLAN by the
access switch. For the configuration shown below the Voice VLAN ID is 10 and
the Data VLAN is untagged.
 Tagged Voice VLAN, Tagged Data VLAN – For a case where both voice and data
packets are tagged as they egress and ingress at the LAN port, the phone must
have VLAN's enable for both the LAN and PC ports. For the configuration shown
below the Voice VLAN ID is 10 and the Data VLAN ID is 15.
ZIP 3xi Installation and Configuration Guide (0000000359)
© 2013 Zultys, Inc. No reproduction or distribution without permission
Technical Publications
Revision 4a / March 28, 2013
Page 20 of 43