Install The Car Batteries; Install The Controller Battery - XMODS RC Start Kit User Manual

Install the Car Batteries

1. Make sure the power switch on the chassis is OFF.
2. Remove the screw on the battery compartment cover. Then
carefully unlatch the battery compartment cover and remove
the cover.
3. Insert four AA batteries (not included) in the compartment,
matching the polarity symbols (+ and –) marked inside.
4. Replace the battery compartment cover and screw.

Install the Controller Battery

Your controller needs a 9V battery (not included). We
recommend 9V alkaline batteries for best performance. If
the LED is off or the range of your car decreases, replace
the battery.
1. Make sure the power switch is OFF, and remove the
screw on the battery compartment.
2. Place the 9V battery in the compartment, matching
the polarity symbols (+ and –) marked inside.
3. Snap the cover back in place and replace the screw.
4