Panasonic KX-TDA0480 Installation Manual page 36

Planning
Up to 2 Hunt Patterns can be defined for each unit.
Hunt pattern # (TGNPRIORITY)
Records are provided for up to four Patterns. Record the Trunk Group numbers for each pattern
to be created.
Priority # Trunk Group No. (TGNPRIORITY)
Enter the Trunk Group Number defined in the Trunk Data section of the worksheet in the
appropriate priority column (e.g., For defined Trunk Groups, number will be 1 or 2).
Voice Mode
Use the Voice Mode section of the worksheet to record configuration parameters affecting the
manner in which the KX-TDA0480 handles voice data packets.
• These parameters are entirely independent from the network configuration (H.323
compliant or DNS), and can be used freely in either network configuration.
Each port (1 to 2) can be configured individually.
Port (RTP_HEAD)
The Voice Mode section is organised so that configuration parameters can be entered for each
port on the KX-TDA0480. Provide information for each of the unit's active ports.
Protocol (RTP_HEAD)
Use the Protocol field to record the voice protocol to be used by the port. Two options are
possible.
H.323 (Default):
Oki:
In the sample, the Protocol for all ports is recorded as the default value, H.323.
Codec Information (AUDIO_CAP)
The principle difference between Codecs is their compression capabilities and their
performance in delay and latency environments.
The KX-TDA0480 allows the selection of one or two Codecs.When two Codecs are selected,
one must be configured as High Priority and the other as Low Priority. A single Codec cannot
36
Use this protocol to have the unit use H.323 voice control protocol (RTP/
RTCP).
Use this protocol to have the unit use Oki's proprietary voice control
protocol.
Installation Manual