Panasonic KX-TDA0480 Installation Manual page 134

Logical Installation
The Maintenance Console Software then displays a list of units selected for reboot. The
checkboxes in the list can be adjusted to reflect the units to be rebooted.
3.
Configure the units to be rebooted if necessary and click the Execute button to proceed with
the reboot. Select the Cancel button to abandon the process.
The Maintenance Console Software displays a confirmation dialogue box.
4.
Click Yes to proceed with the transfer, or cancel to abandon the process.
Once the Maintenance Console Software completes the operation, a Reboot results list is
displayed.
The Result column should display OK. If Error is returned for a unit, there was a problem with
the transmission. See the KX-TDA0480 Programming Guide, Trouble Shooting section.
134 Installation Manual