When You Use A Panasonic Proprietary Telephone - Panasonic KX-TD500 User Manual

2.1 Before Operating the Telephones
On-hook (One of the following).
• Hang up.
• Press the SP-PHONE button.
• Press the MONITOR button.
Press the corresponding function
button on the proprietary
telephone. (Refer to "When You
Use a Panasonic Proprietary
Telephone".)
Enter the required number.
desired no.
<Example>
account code
code.
Dial an extension number.
extension no.
Dial the telephone number.
phone no.

When You Use a Panasonic Proprietary Telephone

If you use a Panasonic proprietary telephone and the DSS Console, they may have some of the useful
function buttons listed below. These buttons make operations simple. The illustrations may differ from
the buttons on your telephone.
Used to answer an incoming call.
ANSWER
Used to receive an incoming intercom
AUTO ANSWER
call in the hands-free mode or mute the
microphone during a conversation.
MUTE
Used for System Speed Dialling or
AUTO DIAL
storing program changes.
STORE
20
Table 1
Enter the account
Table 2
Press the hookswitch lightly.
Wait for an answer.
Talk.
You will hear a confirmation, dial,
ring or ringback tone.
C. Tone: confirmation tone
D. Tone: dial tone
R. Tone: ring tone
R. B. Tone: ringback tone
One short beep
Used to leave a message waiting
MESSAGE
indication or call back the party who left
the message waiting indication.
Used for hands-free dialing. You can
monitor the party's voice hands-free.
MONITOR
Used to insert a pause during dialing.
Used to enter the programming mode
PAUSE
instead of using the PROGRAM
button.
Operation