Troubleshooting; Protecting The Environment - DeWalt DWV902L User Manual

ENG LIS H
of such accessories with this appliance
could be hazardous. To reduce the risk
of injury, only D
accessories should be used with this
product.
ACCESSORIES
DWV9310-XJ
DWV9315-XJ
DWV9316-XJ
DWV9401-XJ
DWV9400-XJ
DWV9402-XJ
D WALT AirLock System
e
DWV9000
DWV9110
DWV9120
DWV9130
DWV9150
SECURING THE POWER CORD TO THE HOSE (FIG. 1)
The power cord (b) can be secured to the suction
hose (g) using the D279058CL hose clip (available
from your local D WALT supplier).
e
Consult your dealer for further information on the
appropriate accessories.

Troubleshooting

PROBLEM SOLUTION
Motor Check power cord, plugs and outlet.
does not
Ensure the on/off /tool control switch
run
is in the ON position ( ).
Suction Remove blockages in the suction
capacity nozzle, suction tube, suction hose
decreases or filters.
Replace the paper or fleece bag.
Check for proper installation of the
filters.
Clean or replace the filters.
Empty canister, refer to Empty
Canister under Operation.
10
WALT recommended
e
Filter
Crush-proof hose
Anti-static hose
Paper bag
Plastic liner
Fleece bag
Twist-Lock
connection
29-35 mm tapered
rubber adapter
35-38 mm stepped
rubber adapter
35 mm OD adapter
35 mm OD angle
adapter
PROBLEM SOLUTION
Vacuum Thermal overload has been tripped:
stops
1. Turn the vacuum off and
running
disconnect vacuum cleaner from
power source.
2. Empty the canister, if needed.
3. Allow the unit to cool.
4. Plug the power cord into an
appropriate outlet and turn on/
off/tool control switch to the ON
position ( ) to test. If vacuum will
not restart contact your seller or
check the location of your nearest
authorised D
in the D
contact your D
address indicated in this manual.
Dust Check for proper installation of the
comes filters.
out while
Ensure filters are not damaged;
vacuuming
replace if necessary.
Ensure filter seals are in place and are
secure.
Automatic Listen for the solenoid clicking to
filter ensure the filter cleaning mechanism
cleaning is working.
is not
working
Power tool Ensure the on/off/tool control switch is
does not
in the ACTIVATION position
turn on.

Protecting the Environment

Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
WALT repair agent
e
WALT catalogue or
e
WALT office at the
e
.
WALT product
e