Keypad Functions; Reading The Event Log - GE NX-148E Installation And Setup

7. KEYPAD FUNCTIONS

7a. READING THE EVENT LOG
The control panel has an event log that can be retrieved using a master code. This log contains a listing
of the last 185 events along with date, time, and partition where the event occurred.
ACTION
[master code]
The display contains the following information.
Event
Date
(Month/Day)
This screen shows an opening of Partition 3 on September 25
that this event is not programmed to be reported to the central monitoring station.
POSSIBLE LOG MESSAGES
DISPLAY
TXlobat
ZN Lost
Duress
Man Fire
Aux 2
Panic
KP Tamper
BoxTamp
AC Fail
OverCur
Srn Tamp
Tel Flt
Exp Trb
Log Full
12
Open
9/25
Time shown in
24-hour format
Transmitter Low Battery - The transmitter has a low battery.
Zone Lost - A wireless or multiplexed zone device is not reporting to the control.
Duress - The control has been armed or disarmed with a Duress code.
Manual Fire - Keypad "Fire" has been activated.
Auxiliary 2 - Keypad "Medical" has been activated.
Panic - Keypad "Panic" has been activated.
Keypad Tamper - The keypad tamper has been activated.
Box Tamper - The box tamper circuit has been activated.
AC Fail - AC failure has been detected.
Over Current - A short circuit of a power supply has occurred.
Siren Tamper - A siren or speaker tamper has been detected.
Telephone Fault - A telephone fault or tamper has been detected.
Expansion Trouble - An expansion device or keypad is not reporting to the control.
Log Full - The event log is full.
Prompts to "Please Enter Your Code".
Shows the most recent event.
Views the events from newest to oldest.
Views the events from oldest to newest.
75
17:57 P3
th
at 5:27 p.m. by user 75. The
DESCRIPTION
RESULT
User or Zone ID
Partition number
indicates an event
not reported
LCD KEYPAD
shows