Changing The Default Codes; User; Engineer - Texecom Premier Elite Ricochet Kits Quick Start Manual

Premier Elite Ricochet Kits Quick Guide
*
Will go to the next available wireless zone starting at 9 or Press
ways starts from the highest zone learnt to the system.
Enters the Delete Menu

*Where available.

 - 
Press
Part Arm 1


Changing the default codes

When the control panel is first powered up and the factory default settings are loaded only the Engineer code and the Master User
code exist.
The Factory default Engineer User code is

The Engineer is always User 00.
The Factory default Master User code is
.


The Master User is always User 01.
If the Master User code has been lost or forgotten, it can be reprogrammed by the Engineer in this menu.
Changing the Default Codes
To change the default User Code proceed as follows:-
Users with access to this option can change their own User codes. User codes are unique to each user and can be 4, 5 or 6 digits
long.
Before changing the codes, it is vital that you memorise or write down the new code you are about to program.

User


1.
Press

2.
Press

3.
Enter

4.
Press

5.
Enter a new 4, 5 or 6-digit User code
6.
Press to accept the new code

7.
Press

8.
Press again

9.
Press to exit the menu The display will return to

10.
normal
20
to enter zone number or use  to search,



Ricochet ® Learn
 to search. Learning always starts from the next available zone, deleting
Alter Part Arms
,  or 
to select Part Arms 1, 2 or 3
Part Arm 2
.

Engineer


1.
Press

2.
Press

3.
Enter

4.
Press

5.
Enter a new 4, 5 or 6-digit User code
6.
Press

7.
Press

8.
Press

9.
Press

10.
normal
Part Arm 3

to accept the new code
again
to exit the menu The display will return to

INS626