Important Safety Instructions 1. Read all instructions. 2. Disconnect the power plug before dismantling, assembling or before cleaning. 3. Avoid touching mobile parts of the fan. 4. Make sure the fan is on a dry and even surface.
Assembly Instructions 1. Remove all items of packaging from the fan. 2. Insert the pedestal tube into the base plate. Carefully turn the unit upside down and secure with the L shaped locking screw as shown in Figure 1. Return to an upright position.
Operating Instructions 1. Use in a dry place, free of excessive humidity and water. 2. When connected to the power the Power LED on the fan control panel will glow. 3. This unit can be operated by the control panel on the fan or by remote control in the same manner.
WARNING! Do not attempt to open or repair the fan yourself. Doing so could void the warranty and cause damage or personal injury. Omega Altise products are distributed in Australia by MEA, (A Division of Hagemeyer Brands Australia Pty Ltd)
Need help?
Do you have a question about the OP40R and is the answer not in the manual?
Questions and answers