Advertisement
Using external equipment
To view external source images, select the input source
from INPUT on the remote control unit or on the TV.
If the image does not come in clearly from the external
equipment connected to INPUT 1 or INPUT 7 (DVI),
you may need to change the input signal type setting
on the "Input Select" menu.
f]j
Option
Output Select
(Fixed]
Input Select
[Auto]
Audio Only
Digital Noise Reduction
(Off]
Press MENU to exit.
• The setting is stored and can be selected on the
"INPUT SOURCE" menu.
Press
Ja/T
to select the signal type you
want to set, and then press ENTER.
• If the selected signal type is incorrect, images
are not displayed or displayed without any color.
Press
Ja/T
to select "Input Select", and then
press ENTER.
• Refer to your external equipment operation manual for the
signal type.
• If you set INPUT 1 to Auto, the TV will automatically select
the input signal.
• Setting INPUT 1 signal selection to "Auto" when other
equipment is connected will result in the following
connection priority.
INPUT 1:
CD
COMPONENT VIDEO
(g)VIDEO
Selecting input signal type (INPUT 1)
Press MENU to display the MENU screen,
and then press ......
/~
to select "Option".
INPUT
e
POWER
0
Press INPUT again to select the input
source.
• An image from the selected source automatically
displays.
• Each time INPUT is pressed, the input source
toggles.
• You can also select the input source by pressing
£./T.
• If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
Press INPUT.
• A list of selectable sources appears.
INPUT FLASHBACK
eo
FREEZE
MENU
O~._.
I
I
VOL
CH
SURROUND{J (JMUTE
o -
v
0
• See pages 13 to 15 for external equipment connection.
@-30
Advertisement
