Advertisement
Watching TV
When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you live.
Perform the following steps before you press
TV POWER
on the remote control unit.
1.
Insert the batteries into the remote control unit. (See page 8.)
2.
Connect the antenna cable to the TV. (See page 12.)
3.
Plug in the AC cord to the AC outlet. (See page 7.)
When "Cable" is selected in Antenna
setting:
Press
.,/T
to select "Analog & Digital
Search Start" to search both analog and
digital broadcasts or "Analog Search Start"
to search only analog broadcasts, and then
press
ENTER.
• The Channel search will start automatically.
• To exit the Channel search screen, select
"Cancel", and then press ENTER.
Example
•
When "Air" is selected in Antenna
setting:
Press .....
/~
to select "Start", and then press
ENTER.
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
EXIT
~RETURN
o
0
FREEZE
MENU
O~O
I - I
Press
~/~
to select "Air" or "Cable".
Press
ENTER
to enter the setting.
Press
.,/T
to select the desired language
listed on the screen, and then press
ENTER.
Antenna setting
Make sure what kind of connection is made with your
TV when selecting "Air" or "Cable".
Language setting
Select from among 3 languages: English, French and
Spanish.
• If no channel is found, confirm the type of connection made
with your TV and try EZ Setup again. (See page 23.)
@-17
Advertisement
