Network Settings; Connection Using A Lan Cable; Connection Example; Specifications Of Pc For Controlling This Projector - JVC DLA-SH4KNL Instructions Manual

Network Settings

Connection Using a LAN
Cable
Connect this projector, the computer for controlling this
projector, and the switching hub using LAN cables,
followed by configuring the network.

Connection Example

When assigning a static IP address
You can acquire the IP address from the controlling
computer simply by configuring a network that consists of
this projector, the controlling computer, and switching
hub. Please refer to technical books on networks for
details.
To Network
Terminal
NOTE:
● Make use of Cat. 5 (equivalent or higher) straight
100Base-TX LAN cables.
CAUTION:
● Configure a network using only this projector, the
controlling computer, and switching hub. Configuring
the IP address settings when the LAN cable is
connected to another network equipment or a hub that
is connected to a different network may cause troubles
to occur.
When assigning IP address from the DHCP
server
(DHCP Server)
WAN
To Network
Terminal
NOTE:
● Make use of Cat. 5 (equivalent or higher) 100Base-TX
LAN cables.
22
Downloaded From projector-manual.com JVC Manuals
Switching Hub
DVI 1
DVI 2
CONTROL
USB
DVI 3
LAN
OPERATE I/B
To LAN
DVI 4
RS-232C
Terminal
Router
LAN
LAN1 LAN2 LAN3 LAN4
DVI 1
DVI 2
CONTROL
USB
DVI 3
LAN
OPERATE I/B
To LAN
DVI 4
RS-232C
Terminal
Specifications of PC for
Controlling this Projector
OS
CPU
Memory
NOTE:
● Make use of Internet Explorer Ver. 6.0.
● Windows is either registered trademark or trademark
of Microsoft Corporation in the United States and/or
other countries.
CAUTION:
● The PC specifications above are reference values for
the application software to run smoothly, and are not
intended to guarantee their operation.
Note that the applications may not run smoothly
depending on the condition of use of the respective
users even when the system requirements are
satisfied.
STANDBY/ON
LAMP
WARNING
STANDBY/ON
LAMP
WARNING
Windows XP Professional SP2 /
Windows XP Home Edition SP2
Pentium3 1 GHz or higher
256 MB and above