User Manual Color video door phone CDV-70K Thank you for purchasing COMMAX products. Thank you for purchasing COMMAX products. Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow instructions to use a product exactly.
Greetings Thank you for choosing COMMAX. Please read this manual carefully before you use the product. Table of contents Greetings ........................1 Table of Contents .....................1 1. Warnings and caution ...................2 2. Product Overview....................4 3. How to use ......................5 4. Settings .........................7 5.
1. Warnings and caution Please follow the things described below in order to prevent any danger or property damage. Prohibition. Warning No disassembly It may cause a serious damage or injury if violated. No touch Caution Must follow strictly. Shows plugging out the power cord It may cause a minor damage or injury if violated.
Page 4
Warning Please don’ t disassemble, If an abnormal sound, burning Please don’t insert any Please use only the designated repair or rebuild this product smell or smoke is coming out metallic or burnable materials batteries for the products of arbitrarily (please contact the of the product, please plug out into the ventilation hole.
2. Product Overview Description Description HANDSET UP BUTTON( ) / MONITOR DOWN BUTTON( ) MONITOR BUTTON POWER SWITCH INTERPHONE BUTTON EXTERNAL CONNECTION DOOR RELEASE BUTTON TERMINAL RINGTONES VOLUME MENU BUTTON SELECT BUTTON ① HANDSET ② MONITOR: The image of visitor is shown. ③...
3. How to use Call from a visitor ① When the visitor calls from the entrance(door camera), the calling sound rings and the image of the visitor is shown on the screen. ② By picking up the handset, you can talk with the visitor. If you press door release button, door will be released.(Door release works only while talking and it is possible only when the door camera is interlocked with door release function.) ③...
Page 7
Adjust the volume When you press volume key repeatedly on stand-by status, you can hear each level of ringtone and volume level will be pop up on the screen. Ringtone of additional interphone is same with volume level of video door phone. Caution When the call volume switch is clicked for call volume adjustment, call sound will be heard from the handset 1 time for a user to check the sound.
4. Settings You can adjust DOOR VIDEO SET, UTILITY and check INFORMATION(model name &version) with (UP)▵‚ / (DOWN)▿ button after pressing Menu button on the right of the product in video talk mode or stand-by mode. Products settings need the following 4 buttons on the right of product. * Start Menu / Exit : MENU button * Select and in-put : SELECT button * Move up / Move right : ▵(UP button) * Move down / Move left : ▿(DOWN button)
Page 9
④ To complete the set, press SELECT button. (2) SCREEN MODE : to set for screen ratio ① ZOOM: Zoon in(expansion) image maintaining actual ratio(4:3) is shown. (full of the screen) ② 4:3: Image of 4:3 ratio without expansion is shown.(This is actual ratio for camera) ③...
5. Installation 1. Installation Method of camera monitor Note Avoid the range of direct sunlight Recommended height is pertinent from 1450 ~ 1500mm Avoid the installation near magnetic activity, humid temperatures and gas 2. Installation Method of camera Note Do not install the camera where it is exposed to Direct sunlight Keep cleaning up its lens to capture good views.
6. Wiring The wiring of this equipment is as follows. Camera connector polarity 1. RED : VOICE 2. BLUE : GND 3. YELLOW : POWER(+12V) 4. WHITE : VIDEO Wiring precautions Each device should be connected by separated cables. If you use UTP CABLE[CAT.5] for CAMERA1and CAMERA2, 2 lines of UTP cable are required.
Page 12
DOOR Camera Wiring CAM1 CAM2 If you use UTP CABLE[CAT.5], connect the rest 4 lines to GND after connecting 4 lines between monitor and camera. INTERPHONE Wiring If you use UTP CABLE[CAT.5], connect the rest 4 lines to GND after connecting 4 lines between monitor and interphone.
1. Turn on the power switch. 2. Please contact your local agent for product maintenance when you have a problem in use of CDV-70K 3. For your safety, power switch with a safety device must be used in your building.
7. Package Contents ③ Manual ① Body of CDV-70K ② Bracket for wall mount ⑥ 4P Connector(2EA) ⑤ M 3 X 6(1EA) ④ T4 X 18(4EA) Screw for body Screw for wall mount ① Monitor(CDV-70K) ② Wall bracket for monitor ③...
Page 15
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133 Web site : www.commax.com PM0270K00010 Printed In Korea / 2013.03.104...
Need help?
Do you have a question about the CDV-70K and is the answer not in the manual?
Questions and answers