Contact your local certified service • Do not use the laser for any purpose other than projecting laser REFERENCE. centre or visit www.dewalt.com.au or www.dewalt.co.nz. lines. IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY • Do not use optical tools such as a telescope or transit to view the...
This laser operates on three LR6 (AA-size) batteries. 2. Replace the INTENDED USE batteries (L). The crossline laser DW088-XE has been designed to project laser lines Make sure the to aid in professional applications. The tool can be used indoor for new batteries horizontal (level), vertical (plumb).
Page 4
(P) on the wall. required. The detector is designed exclusively for use with the DW088-XE and 3. Drill a hole at the marked location. the DW089-XE line lasers and other compatible D WALT line lasers.
If the practice The detector powers up in the narrow accuracy setting (icon appears only with the DW088-XE and the DW089-XE and certain other differs from these conditions, in the lower left corner). Press the accuracy button (W) once to change the measurements have to be compatible line lasers.
Page 6
Accessories SCAN CHECK (FIG. 7) 12. If the difference between the markings is 6 mm or less, the tool is FIG. 9A FIG. 9B properly calibrated. 1. Place the tool in an area between two vertical surfaces that are at WARNING: Since accessories, other than those offered by D WALT, least 9 m apart.