Page 2
1. Technology description Your Junghans atomic watch receives the WWVB time signal via its The most accurate clock in America is the atomic cesium clock located built-in antenna system. The proper function of the receiver contained in this product has been tested as a prototype with regard to its sensiti- U.S.
Page 3
T1 button for at least 3 seconds. The hands will set to the 12 o'clock position during reception and will reset themselves thereafter. Note that your Junghans atomic watch will not Fig. 2 receive the WWVB time signal if set to a time zone other than Pacific, Mountain, Central or Eastern standard time.
Page 4
WWVB signal has been successfully received. cally receive the WWVB signal and set itself to Pacific standard time. After having received a signal, the Junghans atomic watch sets itself You must then either press the T1 button to confirm the time or set the to Pacific standard time.
Page 5
I-40I-944-5I00 ("warranty period") against defects in material and workmanship. If such a defect occurs during the warranty period Junghans will – at its option – repair or replace the product provided that proof of date an place of purchase is supplied by the customer. This limi-...
Page 6
7. Trouble shooting Symptom Description Problem Solution Hands move but the The watch has been manually You may be out of If you find yourself within the reception digital display is blank synchronized and has not yet reception range range (see fig. 1), press the T1 button for received WWVB time signal.
Page 7
This product complies with the EMC directives of the European Union and is subject to technical changes without notice. For more information on Junghans and atomic watch technology see our internet site at www.junghanswatches.com...
Need help?
Do you have a question about the Atomic watch and is the answer not in the manual?
Questions and answers