Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Junghans Anytime Collection
Summary of Contents for Junghans Anytime Collection
- Page 1 Collection Anytime...
- Page 2 Please read the following information on how radio-controlled watches work in general and on how to use your Junghans multi- frequency radio-controlled watch in particular so that you are able to benefit from all of its functions.
-
Page 3: Table Of Contents
A watch that in good reception conditions never goes wrong and never has to Functions be set. The Junghans radio-controlled watch is absolutely precise, as it is linked Selectable LCD displays by radio frequency to the time control systems of the most accurate clocks in Description of watch functions and how to use them the world. -
Page 4: Usable Time Signal Transmitters
With good reception, the Junghans multi-frequency radio-controlled watch thus always shows the perfectly correct time within any of these four trans- Your Junghans multi-frequency radio-controlled watch is capable of fully auto- mission areas. The watch automatically synchronises itself overnight with the matic reception of time signals from the following transmitters: DCF77, WWVB, JJY40 and JJY60 time signal transmitters. -
Page 5: Readiness For Use
(e.g. through an increase in the ambient temperature), you should take the watch as soon as possible to your authorised specialist to have the battery changed, or send it to the Junghans Service Centre to have this done. Battery type: CR 1620 Typical life: Approx. -
Page 6: Functions
Thus if no signal was picked Using the winder up, no transmitter is displayed. On the winder of your Junghans multi-frequency radio-controlled watch there The date is always advanced automatically by the time signal. This process is a red mark (1 ratchet position). -
Page 7: Selectable Lcd Displays
T1 button Hold down button T1 for > 3 seconds until what is shown in the LCD display Accessing the switches to [00]. Then briefly press the T2 button once. The language setting – Day and date display adjustment display now appears. –... -
Page 8: Nd Time
LCD display (e.g. if you are on holiday in Your Junghans multi-frequency radio-controlled watch can also be synchroni- another time zone and want to see the time at home). - Page 9 On the LCD the date is shown and the transmitter that The Junghans multi-frequency radio-controlled watch can pick up the signals was successfully received is represented by the corresponding reception from the DCF77, WWVB, JJY40 and JJY60 transmitters.
-
Page 10: Set Language (Day Of The Week Display)
On successful reception of the WWVB transmitter, the Pacific time zone is shown, the reception display for the WWVB is activated on the LCD and the Your Junghans multi-frequency radio-controlled watch is shipped with the date is displayed with the day of the week in English. -
Page 11: General Information
What is shown on the LCD display switches to the month setting, e.g. [M 01]. 8. General information You again perform the setting via the T2 button. The month you want must x Servicing, such as repairs to the glass, seal or wrist strap should only be then again be confirmed by briefly pressing the T1 button. -
Page 12: Technical Information
Please have your watch checked regularly. Subject to technical modifications Declaration of Conformity Junghans Uhren GmbH herewith declares that this radio-controlled product conforms to the principle requirements and other relevant stipulations of Directive 1999/5/EC. A corresponding declaration of conformity can be requested from... - Page 13 JUNGHANS UHREN GmbH · Postfach 100 · D-78701 Schramberg www.junghans.de · information@junghans.de...
Need help?
Do you have a question about the Anytime Collection and is the answer not in the manual?
Questions and answers