Changing The Displayed Contents; Time Display Key; Meter Key - Kenwood DMF-3020 Instruction Manual

Changing the displayed contents

TIME DISPLAY key

This key allows to switch the mode of time display.
Main unit
ENTER
/TIME DISPLAY

METER key

The level meter display contents can be switched over in cycle.
1. Normal display : The scale around 0 dB is set finely in this
mode, which is suitable for normal recording
(rock) or playback (pop music).
2. Wide display : The scale is set almost evenly from 0 dB to 30
dB in this mode, which is suitable for playing
music with wide level variation from pianis-
simo to fortissimo, such as classical music.
Remote control unit
METER
Remote control unit
TIME
DISPLAY
Each press switches the time display modes.
In play/stop mode
1 SINGLE(+)
: Elapsed time of the track being played
2 SINGLE(–)
: Remaining time on the track being played
3 TOTAL(+)
: Total elapsed play time of tracks
4 TOTAL(–)
: Total remaining play time of tracks (The total num-
ber of tracks is also displayed during stop mode.)
5 REMAIN
: Remaining recording time of disc
6 TITLE
: Track title display (during playback) or Mini Disc
title display (during stop)
In recording mode
1 SINGLE(+)
: Elapsed play time of track being recorded
2 TOTAL(+)
: Total elapsed play time of tracks
3 REMAIN
: Remaining recording time of disc
When no track has been recorded
1 SINGLE(+)
: "BLANK DISC" is displayed. ("NO TRACKS" is
displayed if the disc has a title.)
2 REMAIN
: Remaining recording time of disc
3 TITLE
: The Mini Disc title is displayed
Each press switches the level meter display modes.
1 Example of normal display:
L 40 30 18
21
R
PGM SEARCH
SINGLE
2 Example of wide display:
L 40 30 21 18
R 40 30 27 24
PGM SEARCH
SINGLE
DMF-5020/DMF-3020/MD-203 (En)
15 12 9 7 1 0 OVER ( dB)
5 3 ANALOG
1
MONITOR
15 12 9 7 5 3 1 0 OVER ( dB) ANALOG
1
21 18 15 12 9 6 3 0 OVER ( dB)
MONITOR
49
DIGITAL
2 3
32kHz
44.1kHz
48kHz
DIGITAL
2 3
32kHz
44.1kHz
48kHz