Changing The Displayed Contents; Time Disp. Key; Monitor Key; Rec Input Switching - Kenwood DM-VH7 Instruction Manual

Changing the displayed contents

30

TIME DISP. key

This key allows to switch the mode of time display.
TIME DISP.

MONITOR key

The input source (sound) selected by REC INPUT
can be heard.
MONITOR

REC INPUT switching

ANALOG
: Analog stereo recording of the inputs into the analog recording input. Select this when recording audio from the tuner or
cassette deck.
DIGITAL 1 (DIN CD)
: Digital recording of the input into the digital input (OPTICAL) 1. Select this when recording the input from a digital source
such as the CD player which is connected through a system control cord.
DIGITAL 2 (DIN AUX)
: Digital recording of the input into the digital input (OPTICAL) 2. Select this when recording the input from a auxiliary digital
source such as a BS tuner or DAT recorder.
MONO
: Analog monaural recording of the signals input into the analog recording input.
Select this for example when long hours of recording is required.
¶ In record-pause mode, it is not possible to switch the REC INPUT from "MONO" to another position or vice versa.
Each press switches the time display modes.
In play/stop mode
1 SINGLE(+) : Elapsed time of a track.
2 SINGLE(–) : Remaining play time of a track.
3 TOTAL(+) : Total elapsed time of the MD.
4 TOTAL(–) : Total remaining time of the MD.
5 REMAIN
: Remaining recording time of disc.
6 TITLE
: Disc title indication (at the time of stop)/
Track title indication (at the time of play-
back).
In record mode
1 SINGLE(+) : Elapsed recording time of the track
being recorded.
2 TOTAL(+) : Total elapsed time at the time of re-
cording.
3 REMAIN
: Remaining recording time of disc.
001
0:00
TRACK
MONITOR
AUTO
DIN AUX
L
R
¶ When the sampling frequency of the digital input signal
is not 48 kHz, 44.1 kHz, or 32 kHz, "UNLOCK" will be
displayed and no sound will be heard.
¶ Monitoring is canceled when a MD starts to play.
DM-VH7 (EN)
"MONITOR" indicator