Adjust Sensor Wash - Miele G 4920 Operating Instructions Manual

Programme options

Adjust Sensor wash

You can adjust the Sensor wash pro‐
gramme so that it will remove stubborn
soiling in a lightly soiled load.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the Start button in and whilst
holding it in switch the dishwasher
on using the  button.
Keep the Start button pressed in for
at least four seconds until the Start
indicator light comes on.
If this does not happen, start the proce‐
dure from the beginning again.
52
 Press the  button 5 times.
The  indicator will flash rapidly 5
times at intervals.
The flashing sequence in the display in‐
dicates whether Adjust sensor wash is
activated or not.
–  : "Adjust sensor wash" activated
–  : "Adjust sensor wash" deactiva‐
ted
 Press the Start button to change the
setting.
The setting is now stored in memory.
 Switch the dishwasher off with the 
button.