Names And Functions Of Parts; Main Unit - Kenwood KRF-X9070D Instruction Manual

Names and functions of parts

Main unit

POWER
STANDBY
STANDBY
ON/STANDBY ON/STANDBY
A SPEAKERS B
(For VR-7080)
POWER
PHONES
1 POWER ON/OFF key
(For KRF-X9070D)
Use to turn the main power ON/OFF.
2 ON/STANDBY key
(For KRF-X9070D)
Use to turn the power ON/STANDBY when
the POWER is turned ON.
STANDBY indicator
2 POWER ON/STANDBY key
(For VR-7080)
Use to turn the power ON/STANDBY.
STANDBY indicator
3 SPEAKERS keys
Use to turn the A/B speakers on or off.
4 THX key
Use to switch the status of THX.
5 SPEAKER EQ key
Use to select SPEAKER EQ's setting.
6 Surround LED (light-emitting diode)
indicators
THX indicator
Lights when THX mode has been chosen.
THX mode may or may not be activated
depending upon the applicable playback
mode.
SPEAKER EQ indicator
Lights when the receiver is in the SPEAKER
EQ mode.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to
the system to back up the memory. This is called standby mode. Under
the condition, the system can be turned ON by remote control unit.
Speaker MUTE CLIP
indicators indicator indicator
SP MUTE OPTICAL 6CH INPUT
A B CLIP
COAXIAL
L C SW R
LFE
SL S SB SR
Speaker selection indicators
Input channel indicators
Output channel indicators
THX DOLBY DIGITAL
SPEAKER EQ DTS
ACTIVE EQ CS II
THX SPEAKER EQ ACTIVE EQ DSP STEREO INPUT MODE DIMMER
DVD/6CH CD/DVD PHONO TUNER
VIDEO 1 VIDEO 2 VIDEO 3 MD/TAPE
ACTIVE EQ indicator
£
Lights when the receiver is in the ACTIVE EQ
mode.
DOLBY DIGITAL indicator
£
Lights when the receiver is in the Dolby
Digital mode.
DTS indicator
Lights when the receiver is in the DTS mode.
CS II indicator
£
Lights when the receiver is in the CIRCLE
SURROUND II mode.
7 ACTIVE EQ key
§
Use to select ACTIVE EQ's setting.
8 DSP key
fi
Use to select any of the DSP mode.
9 STEREO key
¶
Use to switch the listen mode to STEREO.
0 INPUT MODE key
Use to switch between the full auto, digital
and analog inputs.
! DIMMER key
fl
Use to select the REC MODE.
Use to adjust the brightness of the display.
@ VOLUME CONTROL knob
# MUTE key
•
Use to temporarily mute the sound.
$ PHONES jack
Use for headphone listening.
Input mode
indicators
DTS DOLBY DIGITAL
AUTO DETECT
MATRIX
ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC
Display
SOUND TONE SETUP
BAND AUTO MEMORY
•
fi
fi
fi
¶
fi
‡
0
ª
‡
§
¶
•
for KRF-X9070D
CAUTION
The power in this equipment will not be completely cut off from the
AC wall outlet when the main switch is turned OFF.
Listen mode
indicators
STEREO NEO:6
THX
LOUDNESS CS II Surround EX
AUTO
MEMORY
STEREO
TUNED
Frequency display
Input display
Preset channel display
Surround mode display
DOWN
MUTE
MULTI CONTROL LISTEN MODE
AV AUX
S VIDEO
% Input Selector keys
(DVD/6CH, CD/DVD, PHONO, TUNER,
VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE)
Use to select input sources.
^ SOUND key
Use to adjust the sound quality and the
ambience effects.
& BAND key
Use to select the broadcast band.
* AUTO key
Use to select the auto or manual tuning
mode.
( TONE key
Use to switch the status of TONE control.
) MEMORY key
Use to store radio stations in the preset
memory.
¡ SETUP key
Use to select the speakers' settings etc.
™ ∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
/ keys
Use for selection adjustments during sound,
set up and preset channel functions.
£ MULTI CONTROL knob
Use to control a variety of settings.
¢ LISTEN MODE knob
Use to select the listening mode.
∞ AV AUX (S VIDEO, VIDEO, L-AUDIO-R)
jacks
§ AV AUX key
Use to switch the input to AV AUX.
AUTO indicator
MEMORY indicator
STEREO indicator
TUNED indicator
VOLUME CONTROL
UP
VIDEO L-AUDIO-R
§
‡
º
º
¶
º
£
£
£
‡
¡
¡
7
EN