Digital Connections - Kenwood KRF-X9070D Instruction Manual

Setting up the system

Digital connections

The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format digital signals.
If you have connected any digital components to the receiver, be sure to read the "Input mode settings" section carefully.
COAXIAL
DIGITAL
OUT
(AUDIO)
RFdigital
demodulator
(DEM-9991D)
(sold separately)
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See "Connecting video components".)
The RF digital demodulator (DEM-9991D) may not be on the market in concern areas countries.
14
EN
COAXIAL OPTICAL OPTICAL
CD/DVD VIDEO 3
VIDEO
2
DVD/
6CH
DIGITAL IN
COAXIAL DIGITAL OUT (AUDIO)
DOLBY DIGITAL RF
OUT (AUDIO)
PCM OUT
OPTICAL
MONITOR
Optical
fiber cable
DIGITAL OUT
Optical fiber cable
Optical fiber cable
OPTICAL DIGITAL IN (AUDIO)
MD recorder
OPTICAL DIGITAL OUT (AUDIO)
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
Connect the video signal and digital
audio signals to the VIDEO 3 jacks.
(See "Connecting video components".)
OPTICAL DIGITAL OUT (AUDIO)
CD or DVD player
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See "Connecting video components".)
LD player
0
#
#