Adjusting The Sound - Kenwood KRF-V6060D Instruction Manual

Normal playback

Adjusting the sound

SPEAKER EQ ACTIVE EQ
A SPEAKERS B
PHONES LOUDNESS
MUTE
LOUDNESS
TONE
Adjusting the TONE
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo mode.
1 Press the TONE key to select the TONE mode.
2 Use the MULTI CONTROL knob or Joystick (5/∞) to select TONE
ON/OFF.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG
L C SW R
LFE
SL S SB SR
3 When in TONE ON selection, press the TONE key for the following
displays.
BASS : Select this to adjust the low frequency range.
TREBLE : Select this to adjust the high frequency range.
4 Use the MULTI CONTROL knob or Joystick (5/∞) to adjust the
sound quality.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG
L C SW R
LFE
SL S SB SR
• The bass and treble levels are adjustable from -10 to +10 in 2 step
increments.
• The adjustment item is displayed for approximately 8 seconds.
Once-touch low frequency emphasis (BASS BOOST)
(remote control only)
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo modes.
Press the BASS BOOST key.
• Press the key once to select the maximum (+10) low frequency
emphasis setting.
• This key does not function when the receiver is in the sound quality
or ambience effects adjustment mode.
Switching back to the previous setting
Press the BASS BOOST key again.
Adjusting the LOUDNESS mode
You can adjust the Loudness function which controls the low volume
settings to maintain the music's richness. The adjustment can be made
when the receiver is in the PCM stereo and analog stereo mode.
Press the LOUDNESS key to turn the LOUDNESS setting ON.
To cancel
Press the LOUDNESS key again so that the "LOUDNESS" indicator
goes off.
22
EN
MULTI CONTROL
TONE
MUTE VOLUME
CONTROL
POWER
ACTIVE EQ
SPEAKER EQ
VOLUME
Joystick
(MULTI CONTROL 5 / ∞,
DOWN 2 / UP3)
BASS BOOST
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
ACTIVE EQ. MATRIX
Surround EX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
Muting the sound
The MUTE key lets you mute the sound of the speakers.
Press the MUTE key.
To cancel
Press the MUTE key again so that the "MUTE" indicator goes off.
• MUTE ON can also be deactivated by turning the VOLUME
CONTROL knob or pressing VOLUME +/– keys.
ACTIVE EQ mode
/
You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON during Dolby Digital and DTS playback and, when in PCM and
analog stereo mode.
Press the ACTIVE EQ key for the following selections;
1 ACTIVE EQ MUSIC
2 ACTIVE EQ CINEMA : Effective when watching a movie.
3 ACTIVE EQ TV
4 ACTIVE EQ OFF
• "ACTIVE EQ" will scroll from right to left.
• When ACTIVE EQ and SPEAKER EQ are OFF and ACTIVE EQ
(MUSIC) is turned ON, SPEAKER EQ (SMALL) will turn ON
automatically.
• ACTIVE EQ function will not be available when REC MODE, AUTO
RDS
THX
TUNING or PRESET MEMORY is ON, and during 96kHz LPCM playback.
RTY
Surround EX
AUTO
MEMO
STEREO
SPEAKER EQ mode
TUNED
SPEAKER EQ's function will automatically detect the various features of
each speaker and effectively creates a stereoscopic sound effect.
Press the SPEAKER EQ key to switch the following setting;
1 SPEAKER EQ SMALL
2 SPEAKER EQ NORMAL : To select an average size speaker.
3 SPEAKER EQ LARGE
RDS
THX
RTY
AUTO
MEMO 4 SPEAKER EQ OFF
STEREO
TUNED
• "SPEAKER EQ" will scroll from right to left.
• SPEAKER EQ cannot be turned OFF when ACTIVE EQ is turned ON.
• SPEAKER EQ function will not be available when REC MODE, AUTO
TUNING or PRESET MEMORY is ON, and during 96kHz LPCM playback.
Listening with headphones
1 Press the A and B Speaker keys so that the speaker indicator
goes off.
• If you turn off all of the speakers when in surround mode, the surround
mode will be canceled as well, resulting in stereo playback.
2 Connect headphones to the PHONES jack.
3 Use the VOLUME CONTROL knob or VOLUME +/– keys to adjust
the volume.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL S SB SR
Blinks
: Effective when listening to music.
(The ACTIVE EQ indicator lights up.)
(The ACTIVE EQ indicator lights up.)
: Effective when watching TV.
(The ACTIVE EQ indicator lights up.)
: The ACTIVE EQ function is turned OFF.
(The ACTIVE EQ indicator goes off.)
: To select a small size speaker.
(The SPEAKER EQ indicator lights up.)
(The SPEAKER EQ indicator lights up.)
: To select a large size speaker.
(The SPEAKER EQ indicator lights up.)
: The SPEAKER EQ function is turned
OFF.
(The SPEAKER EQ indicator goes off.)
Make sure the SPEAKERS
indicators are turned off.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
LFE
SL S SB SR
PHONES
CINEMA EQ.
ACTIVE EQ.
DSP MODE D
CINEMA EQ.
ACTIVE EQ.
DSP MODE D