Presetting Radio Stations Manually; Receiving Preset Stations; Receiving Preset Stations In Order - Kenwood KRF-V5050D Instruction Manual

Presetting radio stations manually

24
MULTI CONTROL
1
Tune to the station you want to store.
2
Press the MEMORY key while receiving the station.
Blinks for 5 seconds
SP A B TI.VOL
L C R
CLIP MUTE
LFE SW
RDS EON PTY
LS S RS
TP TA NEWS
Proceed to step 3 within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY key again).
3
Use the MULTI CONTROL keys to select one of the station
presets (1 – 40).
4
Press the MEMORY key again to confirm the setting.
• Repeat steps 1, 2, 3, and 4 to store as many stations as necessary.
• If you store a station at a previously used preset, the old station will
be replaced by the new one.

Receiving preset stations

RC-R0511
1
Press TUNER to select tuner as the source.
2
Enter the number of the preset station you want to receive
(up to "40").
Press the numeric keys in the following order:
For "15", press .......... 0,5
For "20", press .......... 0,0,)
• If you make a mistake entering a two digit number, press the +10 key
repeatedly to return to the original display and start again.
SP A B TI.VOL
L C R
CLIP MUTE
LFE SW
RDS EON PTY
LS S RS
TP TA NEWS
MEMORY
Lights for 5 seconds
FM AUTO SOUND
AM PRO LOGIC
MHz 3 STEREO
kHz DOWN MIX
Numeric keys
TUNER
RC-R0615/R0617
FM AUTO SOUND
AM PRO LOGIC
MHz 3 STEREO
kHz DOWN MIX

Receiving preset stations in order

1
Press TUNER key to select the tuner as the source.
DIGITAL AUTO
2
S.DIRECT MEMO
Use the P.CALL 4 / ¢ key to select the desired station.
ST.
MONITOR
TUNED
DSP
• Each time you press the key, another preset station is received in
order.
Pressing the P.CALL ¢ does the following:
=01=02=03= ... = ... 38=39=40
Pressing the P.CALL 4 does the following:
01+02+03+ ... + ... 38+39+40+
Holding down the ¢ or 4 key, lets you skip through the
presets, receiving each preset station at 0.5 second intervals.
DIGITAL AUTO
S.DIRECT
MONITOR ST.
TUNED
DSP
Listening to radio broadcasts
P.CALL
4/¢
TUNER
RC-R0511 RC-R0615/R0617
(P.CALL)