Table of Contents
Advertisement
Selecting the Bluetooth device You
Wish to Connect
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1
Select Bluetooth device selection mode
Cell-phone
>
Select "MENU"
"Phone Selection".
Audio player
>
Select "MENU"
"Audio Selection".
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Enter Bluetooth device selection mode
Press the Control knob for at least 1 second.
"(name)" is displayed.
3
Select the Bluetooth device
Turn the Control knob.
4
Set up the Bluetooth device
Push the Control knob towards right or left.
"✱(name)" or "-(name)" is displayed.
"✱": The selected Bluetooth device is busy.
"-": The selected Bluetooth device is on standby.
" " (blank): The Bluetooth device is deselected.
5
Exit Bluetooth device selection mode
Press the [FNC] button.
⁄
• If a cell-phone is already selected, deselect it, and then
select a different one.
• If you cannot select a device using the audio player,
connect the device with the audio player.
Deleting a Registered Bluetooth
device
You can delete a registered Bluetooth device.
1
Select Bluetooth device deletion mode
>
Select "MENU"
"Device Delete".
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Enter Bluetooth device deletion mode
Press the Control knob for at least 1 second.
"(name)" is displayed.
3
Select the Bluetooth device
Turn the Control knob.
4
Delete the selected Bluetooth device
Press the Control knob.
"Delete?" is displayed.
5
Turn the Control knob to select "YES", and then
press the Control knob.
"Delete" is displayed.
6
Exit Bluetooth device deletion mode
Press the [FNC] button.
⁄
• When a registered cell-phone is deleted, its Phone Book,
log, SMS, and voice tag are also deleted.
Displaying the Firmware Version
Display the version of the firmware of this unit.
1
Enter Bluetooth Firmware update mode
>
Select "MENU"
"BT F/W Update".
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Enter Bluetooth Firmware update mode
Press the Control knob for at least 1 second.
The firmware version appears.
3
Exit Bluetooth Firmware update mode
Press the [FNC] button.
⁄
• For how to update the firmware, access our web site.
http://www.kenwood.com/bt/information/
25
|
English
Advertisement
Table of Contents
